Demo Discussion
Forum Config Examples Contributions Vulnerabilities
  Discussion forum about ELOG, Page 102 of 807  Not logged in ELOG logo
 Find |  Login |  Help 
New entries since:Thu Jan 1 01:00:00 1970
 Full | Summary | Threaded | Hide attachments  Show all entries    6451 Entries 
Goto page Previous  1, 2, 3 ... 101, 102, 103 ... 805, 806, 807   Next  
ID Date Icon Author Author Email Category OSdown ELOG Version Subject
  66433   Sun Jul 5 19:14:05 2009 Entry Ed Strohakestrohak@gmail.comQuestionWindows2.7.3-2058Password recovery setup

 I'm trying to use gmail to send password recovery e-mails, I get this error when I submit the email address.

"Error sending Email via "smtp.gmail.com": 5.7.0 Must issue a STARTTLS command first. 2sm5111524agd.34"

 

Any help or insight would be appreciated.

 

 

Ed... 

  66434   Mon Jul 6 07:48:09 2009 Reply Stefan Rittstefan.ritt@psi.chQuestionWindows2.7.3-2058Re: Password recovery setup

Ed Strohak wrote:

 I'm trying to use gmail to send password recovery e-mails, I get this error when I submit the email address.

"Error sending Email via "smtp.gmail.com": 5.7.0 Must issue a STARTTLS command first. 2sm5111524agd.34"

 

Any help or insight would be appreciated.

Ed... 

gmail uses TLS (Transport Layer Security) for the mail communication, which is currently not supported by elog. 

  66444   Sat Jul 18 10:38:00 2009 Question Adam Blandfordahb@etw.deQuestionWindows2.7.5Using conditional attributes

Hi

I have a logbook including the attributes: Author, Topic Date, Phase, Reference, Subject, Start Time, End Time, Duration

The Phase attribute has a number of MOptions including: Design, Manufacture, Testing, Results, Transport

I only want the attributes Start Time, End Time, and Duration to be shown if the Transport Phase is selected. I have tried using the conditional attributes

MOptions Phase = Design{1}, Manufacture{1}, Testing{1}, Results{1}, Transport{2}

and

{1} Show Attributes Edit = Author, Topic Date, Phase, Subject, Start Time, End Time, Duration
{2} Show Attributes Edit = Author, Topic Date, Phase, Subject

This works to show the attributes when the relevant Phase is selected but the Edit page shows the Phase options including the {1}/{2}. Is there are way that these conditionals are not displayed?

Also, I would like the "Duration" Atrribute to be a calculated value showing the time difference between Start Time and End Time. Is this possible?

Thanks,

Adam

  66445   Sat Jul 18 10:38:22 2009 Question Adam Blandfordahb@etw.deQuestionWindows2.7.5Using conditional attributes

Hi

I have a logbook including the attributes: Author, Topic Date, Phase, Reference, Subject, Start Time, End Time, Duration

The Phase attribute has a number of MOptions including: Design, Manufacture, Testing, Results, Transport

I only want the attributes Start Time, End Time, and Duration to be shown if the Transport Phase is selected. I have tried using the conditional attributes

MOptions Phase = Design{1}, Manufacture{1}, Testing{1}, Results{1}, Transport{2}

and

{1} Show Attributes Edit = Author, Topic Date, Phase, Subject, Start Time, End Time, Duration
{2} Show Attributes Edit = Author, Topic Date, Phase, Subject

This works to show the attributes when the relevant Phase is selected but the Edit page shows the Phase options including the {1}/{2}. Is there are way that these conditionals are not displayed?

Also, I would like the "Duration" Atrribute to be a calculated value showing the time difference between Start Time and End Time. Is this possible?

Thanks,

Adam

  66446   Sat Jul 18 10:38:24 2009 Question Adam Blandfordahb@etw.deQuestionWindows2.7.5Using conditional attributes

Hi

I have a logbook including the attributes: Author, Topic Date, Phase, Reference, Subject, Start Time, End Time, Duration

The Phase attribute has a number of MOptions including: Design, Manufacture, Testing, Results, Transport

I only want the attributes Start Time, End Time, and Duration to be shown if the Transport Phase is selected. I have tried using the conditional attributes

MOptions Phase = Design{1}, Manufacture{1}, Testing{1}, Results{1}, Transport{2}

and

{1} Show Attributes Edit = Author, Topic Date, Phase, Subject, Start Time, End Time, Duration
{2} Show Attributes Edit = Author, Topic Date, Phase, Subject

This works to show the attributes when the relevant Phase is selected but the Edit page shows the Phase options including the {1}/{2}. Is there are way that these conditionals are not displayed?

Also, I would like the "Duration" Atrribute to be a calculated value showing the time difference between Start Time and End Time. Is this possible?

Thanks,

Adam

  66447   Sat Jul 18 10:41:28 2009 Reply Adam BlandfordAdam.Blandford@dsto.defence.gov.auQuestionWindows2.7.5Re: Using conditional attributes

Sorry about the multiple entries!!! -> browser problems

  66448   Mon Jul 20 08:18:45 2009 Reply Stefan Rittstefan.ritt@psi.chQuestionWindows2.7.5Re: Using conditional attributes

Adam Blandford wrote:

Hi

I have a logbook including the attributes: Author, Topic Date, Phase, Reference, Subject, Start Time, End Time, Duration

The Phase attribute has a number of MOptions including: Design, Manufacture, Testing, Results, Transport

I only want the attributes Start Time, End Time, and Duration to be shown if the Transport Phase is selected. I have tried using the conditional attributes

MOptions Phase = Design{1}, Manufacture{1}, Testing{1}, Results{1}, Transport{2}

and

{1} Show Attributes Edit = Author, Topic Date, Phase, Subject, Start Time, End Time, Duration
{2} Show Attributes Edit = Author, Topic Date, Phase, Subject

This works to show the attributes when the relevant Phase is selected but the Edit page shows the Phase options including the {1}/{2}. Is there are way that these conditionals are not displayed?

Also, I would like the "Duration" Atrribute to be a calculated value showing the time difference between Start Time and End Time. Is this possible?

Thanks,

Adam

The conditional attributes work only with Options, but not with MOptions as written in the documentation. I tried your set-up with Options and it worked ok. If you attribute Phase is non-exclusive, meaning it could be Manufacture and Testing at the same time, then you have to play some tricks with an additional attribute like

Attributes = Author, Topic Date, ..., Duration, Transport

 

MOptions Phase = Design, Manufacture, Testing, Results, Transport

Options Transport = Yes{2}, No{1}

{1} Show Attributes Edit = ...

{2} Show Attributes Edit = ...

An automatic calculation of Duration is unfortunately not implemented.

  66449   Mon Jul 20 09:26:41 2009 Question lancelance1.hayward@yahoo.comBug reportWindows2.7.6Elog Crashes
Stefan,
 
Our log is crashing on a regular basis and I have been unable to identify the reason. Now the if the log crashes that is not a major problem however when you try to stop the daemon from the services it fails to stop. This means that the daemon cannot be restarted. The only way then is to start killing processes. This is not something I want none experienced guys to do.
 
Looking at the processes is look like the elogd.exe is still running and doesn’t die when you try to stop the daemon service.
 
I checked the times it was crashing with events in the elog logfiles but there was nothing actually happening at these times. It seems something is causing it to just hang.
 
I have attached the eventlog files for you if you have any ideas I would appreciate them.
 
I have not run the log in verbose mode as I have thus far been unable to redirect the output of the screen in order to see what is happening. If you have any tips on how to redirect the output I would save the file for off line analysis. Our log is used 24/7 therefore it is critical that it be kept running so if I was to run it with the –v option the guys would have to restart it and I would lose the data.
 
Any help is much appreciated
 
 
Regards,
 
Lance
Attachment 1: Elog_crash_events.doc
Goto page Previous  1, 2, 3 ... 101, 102, 103 ... 805, 806, 807   Next  
ELOG V3.1.5-3fb85fa6