With the recent Elog 2.9.0 rev 2412 the Self Register = 3 option doesn't work as expected: The user is immediately allowed to login. This is not what this option was doing, which is to wait for an approval by the administrator. Can this behaviour be restored, or should I change the value of the Self Register flag? Thanks

Are you sure about that (maybe used an older revision of elogd where this indeed was a problem?). The current V2.9.0-2412 gives me this:

If I then log in as the admin user, I see the configuration of the new user, but the account is not activated:

So the user cannot log in. The config file is:

[global]
port = 8080
password file = passwd
smtp host = mail.psi.ch
Self register = 3
Admin user = stefan

[demo1]
Attributes = Project, Category

Can you double check?
 

[global]
port = 8080
password file = passwd
smtp host = mail.psi.ch
Self register = 3
Admin user = stefan

[demo1]
Attributes = Project, Category

 HI Stefan,

I tried again and confirm the version number. I never got this pannel saying that my request will be processed by an adminstrator. Maybe the installation was incomplete? Is this pannel outside the standard src files?  I receive the mail as administrator, but the accout is already valid BEFORE I validate it.

This was working in previous versions, i.e. the entry was not created at all. And login wasn't possible.

We went back to 2.8.0 as the server is regularly crashing with 2.9.0 and we have to keep it alive for our running experiment. We are trying to isolate and reproduce the problem...

Try to use the simple config file, and see what happens there. Maybe it's a config option you use differently in the experiment. If you identify the config option which triggers the problem, I can probably reproduce it and fix it. Concerning crashes of 2.9.0: We have it running stably for our experiments, that's why I released it. But there are major changes since 2.8.0, mainly the Kerberos authentification (actually people from CERN asked for that). So it could be that in your case there are problems I don't see. In that case you have to test with which options in the config file the problems start. If elogd crashes, a stack dump would maybe also be helpful for me.

 Dear Stefan, after a long time I managed to get a test setup. The line that creates the misbehaviour is

Guest Menu Commands      = List, Find, Login, Help

which seems inocuous! But with this line a user with inactive account can login without validation. Without this line I get also the proper web page indicating that the account has to be activated when I register as new user.

Another little annoyance: When a user is prevented from login ("The account is currently deactivated") there is NO WAY to login, as any action with Elog tries to use the (non activated) username and password. I can't get back the login page!

Thanks

Great. This this description I could reproduce the error and fix it. The fix is in SVN revision 2414.

Cheers, Stefan. 

 If you could also obtain the display of the message "Your request has been forwarded to the administrator.You will be notified by email upon activation of your new account." when a new user apply in the presence of the Guest Menu commands, that would be perfect. Cheers

I recently upgraded elog from 2.7.8 to 2.8.0 (and moved servers, removed unused logbooks, etc.). I'm now having a problem where elog consistently crashes when attempting to edit multiple entries. This is a very common use case, as we use a "status" field, set to "open" or "closed" to track problems. When a problem is resolved, we will go to the "list" display, set it to "threaded", "select" the thread, and then edit it, to change the status field for all posts in the thread to "closed".

Now, as soon as the "edit" button is clicked, elog crashes. This happens on every thread and logbook that I've tried. The elog logfile itself doesn't show anything useful.

However, if eLog is run with "-v" in place of "-D", it does not crash.

Environment:

        CentOS 5.4

        eLog 2.8.0 built Aug  5 2010, 12:24:11

I tried to reproduce your problem with following simple configuration file:

[Bergman]
Attributes = Author, Status
Options Status = open, closed
Preset Author = $long_name

The result was that it worked fine (see attachments). Maybe there is another setting in your configuration file which causes the problem. Can you try the simple configuration and see if it still crashes?

I'm now running eLog  2.9.0 and seeing the same crashes. However, I've got some more information that may be helpful.

The crash seems to be directly related to the order of replies in the thread. For example, in this thread I am replying to the original entry. The original entry has 2 children (the entries are siblings) and no grandchildren.

In our installation, eLog crashes consistently under the following conditions:

       go to the "list" display

       set it to "threaded"

       "select" a thread that has siblings at any generation of replies

       choose "edit"

If the selected thread only has one entry at any generation, eLog does not crash.

Here's a horrible attempt at a display of two message threads. Note that in the first example, there are 2 replies at the same generation (siblings)--both the person who responded and the original submitter replied to the initial submission. After that, all replies were to successive generations.

-------------- Causes eLog to Crash ------------------
!   Full Name (submitter) module failure 
    =>   Full Name (submitter) Re: module failure 
    =>   Full Name (replier) Re: module failure 
               =>   Full Name (submitter) Re: Re: module failure 
                         =>   Full Name (submitter) Re: Re: Re: module failue

------------------------------------------------------



-------------- No eLog Problem  ------------------
!   Full Name (submitter) Labwide failure of mcc 
    =>   Full Name (replier) Re: Labwide failure of mcc 
           =>   Full Name (submitter) Re: Re: Labwide failure of mcc 
                     =>   Full Name (replier) Re: Re: Re: Labwide failure of mcc 
------------------------------------------------------

 I am also experiencing the same exact problem as explained above. It only seems to happen when a part of the title has changed. I will include my config for an example. Make a few entries, then change the "Customer" paramater. Then try and edit an entry in the thread.

 Enable attachments = 1

Attributes = Employee, Customer, XXX-ID, XXXX Number, SCD, Type, Status, Folder Created, XXXX Received, Equipment Installed, XXX Carrier Up, Customer Carrier Up, QA Completed

Thread display = $Customer  -  $SLR-ID  -  $Type  -  $Status  -  SCD: $SCD  - XXXX: $XXXX Number

Propagate attributes = Status

Locked Attributes = Employee
Options Type = Activation, Termination, Change
Options Folder Created = Yes, No, N/A
Options XXXX Received = Yes, No, N/A
Options Equipment Installed = Yes, No, N/A
Options XXX Carrier Up = Yes, No, N/A
Options Customer Carrier Up = Yes, No, N/A
Options QA Completed = Yes, No

Entries per page = 100

Preset Text = $short_name @ $utcdate -
Append on reply = $short_name @ $utcdate -

Locked Attributes = Employee

Preset Employee = $long_name

Options Status = Open, Closed

Quick Filter = Status, Type

Type SCD = datetime

Summary lines = 0
Enable Attachments = 0
Suppress default = 2
Entries per page = 10

Suppress Email to users = 1

Display mode = threaded
Collapse to last = 1
Expand default = 0
Subst on reply Employee = $long_name 

Faulting application elogd.exe, version 0.0.0.0, faulting module elogd.exe, version 0.0.0.0, fault address 0x000646c7.

 Hi,

I have a MacOSX 10.6.7 laptop that periodically synchronizes my logbook with that on a Debian linux web server.  Both instances of ELOG are 2.9.0-2396.

When I create a new entry on the laptop, the indicated time stamp is correct.  When I click Synchronize on the laptop, the entry that gets mirrored to the Debian server has a time stamp exactly one hour earlier (in the past) on the Debian side.

Likewise, when I create a new entry on the Debian server, the indicated time stamp is correct.  When I click Synchronize on the laptop, the entry that gets mirrored from the Debian machine to the laptop has a time stamp that is exactly one hour in the future on the laptop.

This appears to be due to an incorrect handling of times with regard to "summer" (daylight savings) and "standard" time when mirroring between these two different machines.

Is there a straightforward workaround to immunize against this sensitivity?

Thanks!

Andreas

I am in the process of upgrading from 2.6.0 to 2.9.0.  I am installing it on a windows 2008 r2 server which is 64 bit.  I am having a few issues and am just wondering if Windows 2008 R2 is support with version 2.9.0.  Is there anything I need to know about the installation other than just run the exe file?  So far I have run the exe file and installed the software, the service is running, however I cannot get into the application.  I do not have IIS installed, it does mention it in the installation documentation, is this a requirement?  Any hints or ideas at this point would be appreciated.  I am close I just need that last tweek.  Thanks

 Hi Maureen,

You write "Upgrading from 2.6.0" Is that version working on the same computer?
If so then its strange. Else try with one of the demo config files and see what happens, try different ports etc.

If the service is running it should work the rest too. I'm running it on a Win7 64 bit so 64 bit is not the problem....

Best

Per

I am in the process of upgrading from 2.6.0 to 2.9.0.  I am installing it on a windows 2008 r2 server which is 64 bit.  I am having a few issues and am just wondering if Windows 2008 R2 is support with version 2.9.0.  Is there anything I need to know about the installation other than just run the exe file?  So far I have run the exe file and installed the software, the service is running, however I cannot get into the application.  I do not have IIS installed, it does mention it in the installation documentation, is this a requirement?  Any hints or ideas at this point would be appreciated.  I am close I just need that last tweek.  Thanks

Hello @all,

for a logbook I have also to set up a guest access. As I want to have a login page first opening the logbook,  I created a second logbook entry in the elog.cfg that points to the same subdir as the original logbook. The idea of this guest access is, that users who have no login rights can read selected items with selected attributes. Therefor I restricted the guest account with all available "Guest"-commands in the elog.cfg.

But this is not sufficient. Let's suppose I have an attribute called 'Accessibility' with options 'public' and 'private'. What I am searching for is a filter command for the list display, i.e. if an entry has the accessibility flag 'public', a guest sees this entry in the list and can access it. But if the entry has the accessibility flag private, the entry should not be displayed for guests but for users, that are logged in.

I read the administrator guide carefully, but I didn't found a command that provides for that. Does such a filtering command for the list exist? If not, is it possible to implement one?

Best regards,

Wolfgang Bayer

Hi,

I have a user on our system who keeps getting shut out - she can register, but after a few days her login always stops working. The only thing that I can see that's different about her is that her email address has a hyphen in it (firstname.last-name@stfc.ac.uk). I have tried registering myself with a hyphenated email address, and the same thing happens. Any idea what might be going on here? Is eLog doing some sort of automatic cleanup after a day or two, and rejecting a confirmed email address because it's got a hyphen in it?

Thanks

Ben

Announcing:  elog2sql

elog2sql was created to help translate logbooks created by the program
``elog'' from the native elog flat file format to a MySQL database.  I had a
need to have the elog data in a database, and it appears from the forum that
several others had a similar need.

 I created a set of perl scripts that will allow the translation of elog
logbooks into a MySQL database. The design and implementation of these
scripts are a simple one, and allow the one-time copying of a set of logbooks.

The elog2sql toolkit consists of two scripts. The first script, parsecfg.pl,
reads a elogd.cfg, and creates a sql file that will create a set of db
tables corresponding to elog logbooks. The second script, parselog.pl, takes
a set of elog logfiles, and creates a sql file that will enter the logbook
data into the database. The result is a copy of the elog logbook that can
used as desired inside the framework of MySQL. Attachments are handled by
inserting an entry of the attachment name into an seperate attachment table.
This allows multiple attachments per entry.

You can download the elog2sql program archive at
http://www.davidfannin.com/elog2sql/elog2sql.tar.gz . It contains the
scripts and basic documentation.  You can read the man page at
http://www.davidfannin.com/elog2sql/index.html 

email for questions or comments.

I know this thread was started 2003 but if anyone have this MySQL export script please attach it to this thread.

Thanks,

Pelle

> > I know this thread was started 2003 but if anyone have this MySQL export script please attach it to this thread. > > Thanks, > > Pelle

Sorry, found it in the contribution list https://midas.psi.ch/elogs/Contributions/5