> > A temporary fix for this is to set summary lines = 0
> 
> Right, that's the only way. I would call this "permanent fix" (;-)

I would too - and it actually produces the output that I wanted to see anyway.

Thanks!

I have an attributes defined as:

 - Attributes = Author, PlannedDate, FunctionalArea, Operation, Category,
HardwareName, Significance, EmailNotify, LastRevision, Subject

I have PlannedDate defined as:
 - Type PlannedDate = date

When I use the following statement:
 - Thread display = $subject, planned for $PlannedDate. Last revised:
$lastrevision

I get the following in my THREADED logbook view:

"Adding new services, planned for 1090519200. Last revised: Thu Jul 15
18:03:52 2004"

Note that the ATTRIBUTE $PlannedDate prints as a (I am guessing) serialized
date and is not formatted.

I'm not sure if this is manifested elsewhere.

Something to add to the wishlist:

- Type <attribute> = user

This would define an attribute as being of the type "user" which is a list
of login id's as defined in a password file or on the "Login user =" line. 
In a dataentry form the presence of this ATTRIBUTE would result in a
picklist of loginid's and/or fullnames.

With the "Preset text = " specified, when re-editing a logbook entry (say to
correct a spelling error) the text of the "Message" is replicated and placed
directly below the original text.

Commenting out the "Preset text = " line prevents this behavior.  this
occurs under both FireFox and IE6.0 clients.

Just compiled 1.410 and have run into an issue that *may* have been
introduced in 1.393.

Config file directives such as "Welcome title" could be very long strings. 
After compiling 1.410, our "Welcome title" is truncated and, while I haven't
counted the actual chars, I suspect that the truncation happens at 1024
characters.  The procedure 'getcfg' has a declared passed paramater "int
vsize". 

I haven't looked to see if this effects any other large configuration
strings that are managed by "getcfg" but this procedure is perhaps the most
popular one by far in elog.

> > Just compiled 1.410 and have run into an issue that *may* have been
> > introduced in 1.393.
> > 
> > Config file directives such as "Welcome title" could be very long strings. 
> > After compiling 1.410, our "Welcome title" is truncated and, while I haven't
> > counted the actual chars, I suspect that the truncation happens at 1024
> > characters.  The procedure 'getcfg' has a declared passed paramater "int
> > vsize". 
> 
> Actually before 1.393 you got a buffer overflow if any string in the
> configuration file was longer than 500 chars, so it's a miracle that your elogd
> did not crash on the long Welcome Title. I added the "vsize" parameter to avoid
> such crashes. To satisfy your need for a long Welcome title, I increased the
> string size for that particular case to 10000 chars. Hope this is enough.

Hmmm, it is a wonder.  Our welcome text was not significantly longer (about 20
chars longer) so perhaps . . . ?

Thanks, will recompile and report back.

> Acknowledged. Added your vote to the wishlist.

Thanks!

> > I get the following in my THREADED logbook view:
> > 
> > "Adding new services, planned for 1090519200. Last revised: Thu Jul 15
> > 18:03:52 2004"
> 
> That should be fixed by the current version. Please update.

Thanks!