As a regular elog (ab)user, I have seen this behaviour from time to time.  So far as I recall, the cause actually is that a normal entry is looking for the entry in the "Reply to" field of the normal entry in the yymmdda.log file.  When that entry does not exist, then I see a duplicate line of an entry with entry "#0", in emboldened black type.  I did have a screenshot, but cannot find it for now. 

A quick (relative term, that) search usually finds the entry which references the missing "Reply to" line, and editing that, all is well.  I'm not sure how this can happen, but it does.  NB, I'm still on elog 2.9.2 so I don't know how the draft facility works and possibly enhances the possibility of this issue.

Note that this is different to the case (rather more frequent) where the entry in  the "In reply to" field is missing.  This causes elog to go into a continuous loop and only the strongest measures  ("kill -9 xxxx in linux) will break this out.  This can happen more frequently as if you delete a thread with a large number (>40?) of entries, elog crashes, but more importantly, hasn't finished the job.  Clicking on the remenents of the thread (which are usually the later entries) causes the endless loop.

No problem :) 

Your suggestion worked as it must be. I didn't see "Extendable options = <list>" on guide :/

I guess I need rest a little bit... :(

Thank you

Have a great weekend

Devrim

Apologies that should have been Devrim (autocorrect again) :-(

David,

Try

Extendable options = Require Model, Require Lens, Require Other,

Regards

Grant

Hi

I am trying to add "Extendable options" for some attribute as below example. However button to add new item for list appears only for the first "Extendable options", if disable the first with (;), button appears for the second. It means elog add new item button only the first line "Extendable options" not for other?

Is this a limitation or bug or am I doing something wrong?

Options Require = N/A, Camera{1}, Lens{2}, Other{3}
{1} MOptions Require Model= XNB-6001, PNM-7000VD, PNM-9000VQ, PNM-9320VQ
{2} MOptions Require Lens = SLA-T2480, SLA-T2480V, SLA-T4680, SLA-T4680V, SLA-T1080F, SLA-2M2400P, SLA-2M2800P, SLA-2M3600P, SLA-2M6000P, SLA-2M1200P, SLA-5M3700P, SLA-5M4600P, SLA-5M7000P, SLA-2M2400Q, SLA-2M2800Q, SLA-2M3600Q, SLA-2M6000Q, SLA-5M3700Q, SLA-5M4600Q, SLA-5M7000Q, SLA-2M2400D, SLA-2M2800D, SLA-2M3600D, SLA-2M6000D
{3} MOptions Require Other = Base Unit

Extendable options = Require Model

Extendable options = Require Lens

Extendable options = Require Other

Thank you

Devrim

It looks like you've found a bug in ELOG. I've checked my elog.log and see that all NEW entry lines show "#0".