We are currently having problems with Elog, I never had a problem installing it before but with my last 3 install I can't get it to work. We are running under Windows XP, the installation works perfectly but when I try to use the shortcut pointing to the localhost 8080, I get an error page from Internet Explorer telling me that the server cannot be found. I've rebootied the computer to make sure the server was running but still the same problem. Is there a basic requirement I should look at (Dotnet versionX or specific DLL required)?

No, there is no Dotnet or DLL required. Just start the ELOG server manually by clickin on Start/Programs/ELOG Server/Start ELOG server manually and watch if you can spot any error. One person reported that downloading again the package solved a similar problem.

 Thanks for the feedback, I found the problem, someone installed the AVG toolbar in Internet Explorer in the computers, and for some reason the AVG Error Redirection option prevents Elog from opening in Internet Explorer.

A few days after I create entries in my logbooks, they are being deleted. Has this happened to anyone before?

Never as far as I know. Try to do logging on your elog server ("Log file = ..."), then you will see all write/delete accesses. So if someone deletes your entries, you will see a trace. 

Hello

I have a config file  :

Attributes = Author, Author Email, Category, Customer, server,HPSD_ID, Cust_ID ,Subject ,  Change Window
; which fields will be shown !!
List display = ID,Author, Category, Customer, server, HPSD_ID, Cust_ID,Subject ,  Change Window

Type Change Window  = datetime
# Type Change Window End = datetime
Options Category = Network , Server ,
Options Customer = Arag{A}, Frieslandbank{B}, Super de Boer{C}, NRE{D}

{A} Options server = arag-lin1,arag-lin2,arag-lin3,arag-lin4, arag-lin5, arag-lin6, arag-lin7
{B} Options server = rc1upas02, rc1upas22,rc1upas03,rc1upas04,rc1uptsm01,rc1upas07,rc1upas08
{C} Options server = xia61031,xia61032 ,xia61033,xia61034,xia61035,xia61036,xia61037,xia61038,xia61039,xia61040,xia61032 ,xia61033,xia61034,xia61035,xia61036,xia61037,xia61038,xia61039,xia61040
{D} Options server = server27,server32,server34 ,server37,server38,server40
Extendable options = Category , Customer,server
Required Attributes = server , customer, Subject, Change window Begin , Change Window End
 

This works OK, However when I change the {A} Options  to {A} Moptions in the above code i get an error which tells me that a required field is not selected. So, with the pull down it works, with Moptions ( select boxes )  it will say that a required field is not selected.  Any hints ?

regards Arno

Thanks for reporting this bug. I fixed it in SVN revisoin 2213. 

Greetings,

I was wondering, is it possible to wrap lines in the config file ? 

I have to add a dropdown lost which is kinda long and typing everything on one line will make ik kinda unreadable.
Somehow wrapping the line so each entry will get on a separate line would make it much better readable. (which
makes less errors).

W.
 

Hello

I have the following in elog.cfg :

Attributes = Author, Author Email, Category, Customer, server, Subject ,  Change Window Begin , Change Window End
List display = ID,Author, Author Email, Category, Customer, server,  Subject ,  Change Window Begin , Change Window End

Type Change Window Begin = datetime
Type Change Window End = datetime

So I want to be able to give a start and end date to the user.  However : If I open a find/Search I see this :

There are for each  Change Window <item>   we get  Start: and End: time entries. Was expecting only one date entrie .

Why is this ? Seems to be a feature of datetime  or am i missing something.

Right, that's a feature. Many people want to specify a range when doing a query on a date. Like Change Window Begin after Jan 1st, 2009 and before Jan 5th, 2009. If you just want a single date, set both Start: and End: to the same date, or actually the End: to Start+1 Day to cover all 24 hours of the Start: date. Otherwise when you have data + time, you would have to match the exact second to retrieve a certain entry. So having a range there is more powerful.

I need some guidedance on how to access the logbook from another computer. I installed the logbook on a Windows server machine and started the logbook using port 81.

I can connect to the logbook on the same machine, but I can not access it from another machine on the same network.

I already confirm that the windows firewall is not enable.

Are your sure about the firewall, because this is the usual reason for that problem. Can you "ping" your server machine from the other machine (like "ping <server>"), maybe you have some network problems.

I need some guidedance on how to access the logbook from another computer. I installed the logbook on a Windows server machine and started the logbook using port 81.

I can connect to the logbook on the same machine, but I can not access it from another machine on the same network.

I already confirm that the windows firewall is not enable.

Here's the issue. We use elog to develope products we need to be able to see all the thumbnail images in a

particular logbook. Our default view is to use the threaded view fully expanded in order to have all the thumbnails

be displayed for each product. This works fine but when we move one message to another logbook the thumbnails

end up getting broken and won't be displayed. The only way to fix this is to remove the image and re-upload the

picture after the message is moved. This is not a good option because we have hundrends of items that are

constantly being moved around from logbook to logbook. Any ideas?

Regards,

Mike

EDIT:

On further inspection it seems that when you are moving messages to another log book the image date filename

is re-written which of course breaks the html link to the image.  Is there anyway to supress this so that the filename

stays in tact when it's moved from one book to another. I don't see why the name of an attachment has to get changed

just because something is moved around.

I fixed this in revision #2204. The attachment names now stay the same. There is one tiny risk of screwing up, namely if you have the same attachment name in two different logbooks (accidentally also submitted at the same second and therefore the same time stamp). If you then copy these two entries to a third logbook, one attachment will overwrite the other one, but that risk is indeed really small. I actually had to re-write the link to the attachment inside the text body (even differently for ELCode and HTML encoding). So I'm not 100% sure I covered all cases, so just give it a try.

 This is a major improvement. The only issue now is when we embed an image in the body of the message elog makes a nice thumbnail. When you move the message to another logbook the thumbnail doesn't work and instead it shows the MASSIVE full size version of the picture instead. Is that possible to fix?

Thanks Stefan!

Mike

Can you try revision #2206? 

 Stefan,

Works perfectly, thanks for the fix you rock!

Mike