Can I turn off emoticons?, posted by Dan Chitwood on Wed Sep 21 04:24:43 2005
|
Is there a way to not use the emoticons, but at the same time use the ELCode?
An example would be to add a slash before the emoticon code like this: /:)
Thanks,
Dan |
Re: Can I turn off emoticons?, posted by Stefan Ritt on Wed Sep 21 09:06:03 2005
|
| Dan Chitwood wrote: | Is there a way to not use the emoticons, but at the same time use the ELCode?
An example would be to add a slash before the emoticon code like this: /:)
Thanks,
Dan |
There are two ways:
a) put a "\" in front of the emoticon like this: \:) -> :)
b) put a [code] tag around your text. Any text inside the [code] tag is not interpretet like:
[code]Hello ;) [I]italics[/i] [/code]
note that the trick with the "\" only works in the current CVS version of elog. |
|
Re: Can't use the command-line client, posted by David Spindler on Tue Oct 4 19:40:27 2005
|
I have a similar problem. I am using Windows version, and whenever I use the elog client to send entry, it will not take with MOptions set. I usually have 2 attributes required (both MOptions), and I get the message that it is missing a required attribute. When I use ROptions, or Options, it works fine. Is there a problem with MOptions, or am I perhaps using a badly formatted commandline?
Commandline as follows: C:\elog>elog -h IP_ADR -p 80 -l gbld -u username password -a Type=Other -a Operator=SCADA -a Category=Controls -a Subject=Alarm "Please ignore."
Type and Category are required and MOptions.
Below is the pertinent part of the config file:
;***** Attribute Section
Attributes = Log Date, Operator, Type, Category, Engine, Work Order #, EPN, Fuel Tank 1 (A&B), Fuel Tank 2 (C&D), Engine Hours Stop, Engine Hours Start, Email To, Subject
Comment EPN = (Equipment Piece Number)
Comment Fuel Tank 1 (A&B) = (West)
Comment Fuel Tank 2 (C&D) = (East)
MOptions Type = Alarm, Trouble, ESP, Haz. Wx.,Problem, PM, Routine, Load Test, Other
MOptions Category = Engine, Generator, Controls, Fuel, Oil, HV Switchgear, MLG&W, Other
Options Engine = All, 1A, 2A, 3A, 4A, 5A, 1B, 2B, 3B, 4B, 5B, 1C, 2C, 3C, 4C, 5C, 1D, 2D, 3D, 4D, 5D, A Bus, B Bus, C Bus, D Bus, A&B Busses, C&D Busses, West Gen (001), East Gen (002)
Required Attributes = Type, Category, Subject
If time permits, I would appreciate any help possible.
BTW, I like the additional elcode. |
|
Re: Can't use the command-line client, posted by David Spindler on Tue Oct 4 20:24:26 2005
|
| I just noticed in the changelog that my apparent problem with MOptions may have been fixed. I will try a newer version and see if it works. |
|
Re: Can't use the command-line client, posted by David Spindler on Tue Oct 4 20:33:05 2005
|
| David Spindler wrote: | | I just noticed in the changelog that my apparent problem with MOptions may have been fixed. I will try a newer version and see if it works. |
It did.
Keep up the good work. |
Display Attribute no longer works in Beta 5?, posted by Ulrich Trüssel on Fri Oct 7 08:53:00 2005 
|
Just changed from Beta 2 to Beta 5:
I'm using Display Attribut = [elog:$logbook/$message id] as a reference link for other entries (ex.: Display Referenz = [elog:$logbook/$message id]). also see the attached elogd.cfg file.
With Beta 2 (not testet with Beta 3 or 4!) this worked very well -> see attached Display Attribute with 260-b2.jpg file.
With Beta 5 is seems no longer to work -> see attached Display Attribute with 260-b5.jpg file.
ANy ideee what's wrong in my elogd.cfg??? Thanks! |
|
Re: ELOG repository moved from CVS to Subversion, posted by Exaos Lee on Sat Oct 8 05:08:40 2005
|
Hi, Stefan,
I cannot checkout due to the following error:
------------
$ svn checkout svn+ssh://svn@savannah.psi.ch:/afs/psi.ch/project/meg/svn/elog/trunk elog
ssh: savannah.psi.ch:: Name or service not known
svn: Connection closed unexpectedly
------------
It seems that my PC cannot find the host savannah.psi.ch within CIAE. Maybe it's the problem of our DNS server. Anyway, what is the IP of savannah? |
|
Re: ELOG repository moved from CVS to Subversion, posted by Stefan Ritt on Sat Oct 8 08:44:22 2005
|
| Exaos Lee wrote: | Hi, Stefan,
I cannot checkout due to the following error:
------------
$ svn checkout svn+ssh://svn@savannah.psi.ch:/afs/psi.ch/project/meg/svn/elog/trunk elog
ssh: savannah.psi.ch:: Name or service not known
svn: Connection closed unexpectedly
------------
It seems that my PC cannot find the host savannah.psi.ch within CIAE. Maybe it's the problem of our DNS server. Anyway, what is the IP of savannah? |
Sorry, was my mistake. In the command you have to use savannah.psi.ch, not savannah.psi.ch: (with the colon). So the full command is
$ svn checkout svn+ssh://svn@savannah.psi.ch/afs/psi.ch/project/meg/svn/elog/trunk elog |
|