Demo Discussion
Forum Config Examples Contributions Vulnerabilities
  Discussion forum about ELOG, Page 16 of 804  Not logged in ELOG logo
ID Date Icon Authordown Author Email Category OS ELOG Version Subject
  69768   Mon Mar 25 10:18:55 2024 Reply scottshiva.ps@stfc.ac.ukQuestionLinux3.1.5-1Re: Installation with amp on Rocky Linux

Is there an RPM available for Rocky 8 or Rocky 9?

And checking over https://elog.psi.ch/elog/download/RPMS/ , only el7 is found. Is that the right place to look for EL8 or EL9 based RPM?

Thanks,

Scott

Laurent Jean-Rigaud wrote:

Normally it should work. Requirements are set in SPEC file.

$ rpm -qpi --requires elog-3.1.5-20240226.el7.x86_64.rpm
/bin/sh
/bin/sh
/bin/sh
config(elog) = 3.1.5-20240226.el7
krb5-libs
libc.so.6()(64bit)
libc.so.6(GLIBC_2.14)(64bit)
libc.so.6(GLIBC_2.15)(64bit)
libc.so.6(GLIBC_2.2.5)(64bit)
libc.so.6(GLIBC_2.3)(64bit)
libc.so.6(GLIBC_2.3.4)(64bit)
libc.so.6(GLIBC_2.4)(64bit)
libc.so.6(GLIBC_2.8)(64bit)
libgcc_s.so.1()(64bit)
libgcc_s.so.1(GCC_3.0)(64bit)
libkrb5.so.3()(64bit)
libkrb5.so.3(krb5_3_MIT)(64bit)
liblber-2.4.so.2()(64bit)
libldap-2.4.so.2()(64bit)
libm.so.6()(64bit)
libpam.so.0()(64bit)
libpam.so.0(LIBPAM_1.0)(64bit)
libssl.so.10()(64bit)
libssl.so.10(libssl.so.10)(64bit)
libstdc++.so.6()(64bit)
libstdc++.so.6(CXXABI_1.3)(64bit)
libstdc++.so.6(GLIBCXX_3.4)(64bit)
openldap >= 2.4.1
rpmlib(CompressedFileNames) <= 3.0.4-1
rpmlib(FileDigests) <= 4.6.0-1
rpmlib(PayloadFilesHavePrefix) <= 4.0-1
rtld(GNU_HASH)
rpmlib(PayloadIsXz) <= 5.2-1

The EL7 binary needs the following RPM :

$ ldd /usr/local/sbin/elogd | awk '{print $1}' | while read r ; do rpm -qf /lib64/$r ; done | sort -u
erreur�: fichier /lib64/linux-vdso.so.1�: Aucun fichier ou dossier de ce type
erreur�: fichier /lib64/lib64/ld-linux-x86-64.so.2�: Aucun fichier ou dossier de ce type
audit-libs-2.8.5-4.el7.x86_64
cyrus-sasl-lib-2.1.26-24.el7_9.x86_64
glibc-2.17-326.el7_9.x86_64
keyutils-libs-1.5.8-3.el7.x86_64
krb5-libs-1.15.1-55.el7_9.x86_64
libcap-ng-0.7.5-4.el7.x86_64
libcom_err-1.42.9-19.el7.x86_64
libgcc-4.8.5-44.el7.x86_64
libselinux-2.5-15.el7.x86_64
libstdc++-4.8.5-44.el7.x86_64
nspr-4.35.0-1.el7_9.x86_64
nss-3.90.0-2.el7_9.x86_64
nss-softokn-freebl-3.90.0-6.el7_9.x86_64
nss-util-3.90.0-1.el7_9.x86_64
openldap-2.4.44-25.el7_9.x86_64
openssl-libs-1.0.2k-26.el7_9.x86_64
pam-1.1.8-23.el7.x86_64
pcre-8.32-17.el7.x86_64
zlib-1.2.7-21.el7_9.x86_64

 

Almost all of them are installed by ELOG RPM or are already installed by default Redhat profiles.

Nina, do you use right RPM version (el7/8/9) according to Rockylinux one ? El7 rpm can not be installed on RL9...

 

Bye

 

Stefan Ritt wrote:

Is there a way to install all dependencies automatically? Like if I install a package like "emacs" I get a list of dependencies with are automatically installed:

Dependencies Resolved

====================================================================================================================================
 Package                          Arch                       Version                                Repository                 Size
====================================================================================================================================
Updating:
 emacs                            x86_64                     1:24.3-23.el7_9.1                      rhel7                     2.9 M
Updating for dependencies:
 emacs-common                     x86_64                     1:24.3-23.el7_9.1                      rhel7                      20 M

Transaction Summary
====================================================================================================================================
Upgrade  1 Package (+1 Dependent package)

Total download size: 23 M
Is this ok [y/d/N]:

Laurent Jean-Rigaud wrote:

Hi Nina,

The RPM is built with Kerberos (libber*), LDAP (libldap*) and SSL (libssl*) options. These libs are missing on your system, and rpm command does not take care of dependencies.

 Try to install with yum : yum install elog-latest.el7.x86_64.rpm

Normally the missing rpm files should be dlded from RL repo if your host can access to them...

.

Laurent

Nina Bondarenko wrote:

Hello all,

I am installing elog on an Rocky Linux instance. Have dependensy problem. 

rpm -Uvh elog-latest.el7.x86_64.rpm 

error: Failed dependencies:

    liblber-2.4.so.2()(64bit) is needed by elog-3.1.5-1.el7.x86_64

    libldap-2.4.so.2()(64bit) is needed by elog-3.1.5-1.el7.x86_64

    libssl.so.10()(64bit) is needed by elog-3.1.5-1.el7.x86_64

    libssl.so.10(libssl.so.10)(64bit) is needed by elog-3.1.5-1.el7.x86_64

 

Any clues from developers to resolve it and keep the software working. Thank you in advance!

Bests, Nina

 

 

 

 

  69770   Mon Mar 25 16:19:02 2024 Reply scottThank shiva.ps@stfc.ac.ukQuestionLinux3.1.5-1Re: Installation with amp on Rocky Linux

Hi,

Thanks for the links to EL8/EL9. 

 

Does this package support LDAP and SSL as well?

 

 

Laurent Jean-Rigaud wrote:

Hi,

The ELOG website provides new link to RPM packages :

Linux binaries are distributed as RPMs.

EL8/EL9 RPM are also available.

 

scott wrote:

Is there an RPM available for Rocky 8 or Rocky 9?

And checking over https://elog.psi.ch/elog/download/RPMS/ , only el7 is found. Is that the right place to look for EL8 or EL9 based RPM?

Thanks,

Scott

Laurent Jean-Rigaud wrote:

Normally it should work. Requirements are set in SPEC file.

$ rpm -qpi --requires elog-3.1.5-20240226.el7.x86_64.rpm
/bin/sh
/bin/sh
/bin/sh
config(elog) = 3.1.5-20240226.el7
krb5-libs
libc.so.6()(64bit)
libc.so.6(GLIBC_2.14)(64bit)
libc.so.6(GLIBC_2.15)(64bit)
libc.so.6(GLIBC_2.2.5)(64bit)
libc.so.6(GLIBC_2.3)(64bit)
libc.so.6(GLIBC_2.3.4)(64bit)
libc.so.6(GLIBC_2.4)(64bit)
libc.so.6(GLIBC_2.8)(64bit)
libgcc_s.so.1()(64bit)
libgcc_s.so.1(GCC_3.0)(64bit)
libkrb5.so.3()(64bit)
libkrb5.so.3(krb5_3_MIT)(64bit)
liblber-2.4.so.2()(64bit)
libldap-2.4.so.2()(64bit)
libm.so.6()(64bit)
libpam.so.0()(64bit)
libpam.so.0(LIBPAM_1.0)(64bit)
libssl.so.10()(64bit)
libssl.so.10(libssl.so.10)(64bit)
libstdc++.so.6()(64bit)
libstdc++.so.6(CXXABI_1.3)(64bit)
libstdc++.so.6(GLIBCXX_3.4)(64bit)
openldap >= 2.4.1
rpmlib(CompressedFileNames) <= 3.0.4-1
rpmlib(FileDigests) <= 4.6.0-1
rpmlib(PayloadFilesHavePrefix) <= 4.0-1
rtld(GNU_HASH)
rpmlib(PayloadIsXz) <= 5.2-1

The EL7 binary needs the following RPM :

$ ldd /usr/local/sbin/elogd | awk '{print $1}' | while read r ; do rpm -qf /lib64/$r ; done | sort -u
erreur�: fichier /lib64/linux-vdso.so.1�: Aucun fichier ou dossier de ce type
erreur�: fichier /lib64/lib64/ld-linux-x86-64.so.2�: Aucun fichier ou dossier de ce type
audit-libs-2.8.5-4.el7.x86_64
cyrus-sasl-lib-2.1.26-24.el7_9.x86_64
glibc-2.17-326.el7_9.x86_64
keyutils-libs-1.5.8-3.el7.x86_64
krb5-libs-1.15.1-55.el7_9.x86_64
libcap-ng-0.7.5-4.el7.x86_64
libcom_err-1.42.9-19.el7.x86_64
libgcc-4.8.5-44.el7.x86_64
libselinux-2.5-15.el7.x86_64
libstdc++-4.8.5-44.el7.x86_64
nspr-4.35.0-1.el7_9.x86_64
nss-3.90.0-2.el7_9.x86_64
nss-softokn-freebl-3.90.0-6.el7_9.x86_64
nss-util-3.90.0-1.el7_9.x86_64
openldap-2.4.44-25.el7_9.x86_64
openssl-libs-1.0.2k-26.el7_9.x86_64
pam-1.1.8-23.el7.x86_64
pcre-8.32-17.el7.x86_64
zlib-1.2.7-21.el7_9.x86_64

 

Almost all of them are installed by ELOG RPM or are already installed by default Redhat profiles.

Nina, do you use right RPM version (el7/8/9) according to Rockylinux one ? El7 rpm can not be installed on RL9...

 

Bye

 

Stefan Ritt wrote:

Is there a way to install all dependencies automatically? Like if I install a package like "emacs" I get a list of dependencies with are automatically installed:

Dependencies Resolved

====================================================================================================================================
 Package                          Arch                       Version                                Repository                 Size
====================================================================================================================================
Updating:
 emacs                            x86_64                     1:24.3-23.el7_9.1                      rhel7                     2.9 M
Updating for dependencies:
 emacs-common                     x86_64                     1:24.3-23.el7_9.1                      rhel7                      20 M

Transaction Summary
====================================================================================================================================
Upgrade  1 Package (+1 Dependent package)

Total download size: 23 M
Is this ok [y/d/N]:

Laurent Jean-Rigaud wrote:

Hi Nina,

The RPM is built with Kerberos (libber*), LDAP (libldap*) and SSL (libssl*) options. These libs are missing on your system, and rpm command does not take care of dependencies.

 Try to install with yum : yum install elog-latest.el7.x86_64.rpm

Normally the missing rpm files should be dlded from RL repo if your host can access to them...

.

Laurent

Nina Bondarenko wrote:

Hello all,

I am installing elog on an Rocky Linux instance. Have dependensy problem. 

rpm -Uvh elog-latest.el7.x86_64.rpm 

error: Failed dependencies:

    liblber-2.4.so.2()(64bit) is needed by elog-3.1.5-1.el7.x86_64

    libldap-2.4.so.2()(64bit) is needed by elog-3.1.5-1.el7.x86_64

    libssl.so.10()(64bit) is needed by elog-3.1.5-1.el7.x86_64

    libssl.so.10(libssl.so.10)(64bit) is needed by elog-3.1.5-1.el7.x86_64

 

Any clues from developers to resolve it and keep the software working. Thank you in advance!

Bests, Nina

 

 

 

 

 

 

  69789   Wed Apr 24 12:55:25 2024 Question scottshiva.ps@stfc.ac.ukQuestionLinux | Other3.1.5Imagemagick not working on Ubuntu

Hi Team,

I have set up Elog on the Ubuntu server using the compile and install method. I have installed ImageMagick and GhostScript along with that.

You can find "ImageMagick detected" mentioned in the service status provided below:

=======================================================================

● elogd.service - The ELOG Server
     Loaded: loaded (/lib/systemd/system/elogd.service; enabled; vendor preset: enabled)
     Active: active (running) since Tue 2024-04-23 08:59:50 UTC; 1 day 1h ago
       Docs: man:elogd(8)
             man:elog(8)
   Main PID: 858 (elogd)
      Tasks: 1 (limit: 9365)
     Memory: 163.5M
        CPU: 25.825s
     CGroup: /system.slice/elogd.service
             └─858 /usr/local/sbin/elogd -D -c /usr/local/elog/elogd.cfg

Apr 23 08:59:50 server1.com systemd[1]: Starting The ELOG Server...
Apr 23 08:59:50 server1.com elogd[858]: elogd 3.1.5 built Mar 21 2024, 17:20:15
Apr 23 08:59:50 server1.com systemd[1]: Started The ELOG Server.
Apr 23 08:59:50 server1.com elogd[858]: revision fe60aaf0
Apr 23 08:59:50 server1.com elogd[858]: CKeditor detected
Apr 23 08:59:51 server1.com elogd[858]: ImageMagick detected
Apr 23 09:00:08 server1.com elogd[858]: Server listening on port 8080

​=======================================================================

root@server1# identify -version
Version: ImageMagick 6.9.11-60 Q16 x86_64 2021-01-25 https://imagemagick.org
Copyright: (C) 1999-2021 ImageMagick Studio LLC
License: https://imagemagick.org/script/license.php
Features: Cipher DPC Modules OpenMP(4.5)
Delegates (built-in): bzlib djvu fftw fontconfig freetype heic jbig jng jp2 jpeg lcms lqr ltdl lzma openexr pangocairo png tiff webp wmf x xml zlib


​=======================================================================

However, the ImageMagick was found to be not working on my logbook. See the below error on the logbook.

Cannot create thumbnail, please check ImageMagick installation

I have attached a screenshot for reference.

Please could someone help me how to solve this?

Many thanks,
Scott
 

Attachment 1: image.png
image.png
  67504   Wed May 15 17:24:12 2013 Question scogordoscogordo@hotmail.comQuestionWindowsELOG V2.7.Export entries to XLS or CSV?

I've been asked to export one of our logbooks to xls or csv. Doable?

Thanks,

Scott

  Draft   Mon May 20 11:54:37 2024 Question sam wellssam.wells@awe.co.ukQuestionLinux  
  104   Wed Aug 14 00:22:57 2002 Reply sam smithsmith@lkpd.orgInfo  Re: elogd.cfg for this demo site
Thank you very much!

> Just since some people asked for: Here is the elogd.cfg for this demo 
> logbooks:
> 
> ========= cut here ===================
> 
> [global]
> logbook tabs = 1
> tab cellpadding = 2
> SMTP host = mailsend.psi.ch
> URL = http://midas.psi.ch/elogdemo/
> user = midas
> group = midas
> 
> [Linux]
> Theme = default
> Comment = General linux Tips & Tricks
> Data dir = /usr/local/elogdemo/logbooks/Linux
> Attributes = Author, Type, Icon, Category, Subject
> Options Type = Routine, Software Installation, Problem Fixed, 
> Configuration, Tips & Tricks, Info, Other
> IOptions Icon = icon1.gif, icon3.gif, icon4.gif, icon5.gif, icon6.gif, 
> icon7.gif, icon8.gif, icon12.gif, icon13.gif, icon14.gif
> Options Category = General, Hardware, Software, Network, Applications, 
> Shell, Account, Packages, Daemons, Other
> Required Attributes = Author
> Subst Author = $author
> Summary on default = 1
> Summary lines = 0
> Email all = stefan.ritt@psi.ch
> Email message body = 1
> 
> [Database]
> Theme = default
> Comment = Demo of database-like elog
> Data dir = /usr/local/elogdemo/logbooks/database
> Attributes = Type, Operating system, Location, Status, Comment
> Required Attributes = Type, Operating system, Location, Status
> Options Type = PC, Router, Bridge
> Options Operating system = Linux, Windows NT, Windows 2000, Windows XP, 
> Windows ME, Embedded
> Options Location = Building1, Building2, Building3
> Options Status = working, defect, in repair
> Show text = 0
> Start page = ?cmd=Search&mode=summary
> Display search = #, Type, Location, Status
> Summary lines = 0
> Find menu commands = New, Find, Last
> Menu commands = Back, New, Edit, Delete, Find, Config, Help
> Number Attachments = 0
> Suppress default = 2
> Entries per page = 10
> 
> [Forum]
> ; general options
> Password file = /usr/local/elogdemo/logbooks/forum/passwd
> Admin user = stefan
> Self register = 2
> Theme = default
> Comment = Discussion forum about ELOG
> Data dir = /usr/local/elogdemo/logbooks/forum
> Display mode = threaded
> Start page = ?cmd=Search&mode=threaded
> Menu commands = Back, New, Edit, Reply, Find, Last day, Last 10, Admin, 
> Config, Logout, Help
> Find menu commands = New, Find, Last x, Admin, Config, Logout, Help
> Guest menu commands = Back, Find, Login, Help
> Guest find menu commands = Find, Login, Help
> Number Attachments = 1
> Message comment = <img src=icons/icon6.gif> Please enter only serious 
> messages here, for testing use the <b>Linux</b> Logbook:
> Filtered browsing = 0
> Entries per page = 8
> Reverse sort = 1
> Restrict edit = 1
> 
> ; Attributes
> Attributes = Icon, Author, Author Email, Category, Subject
> IOptions Icon = icon1.gif, icon2.gif, icon3.gif, icon4.gif, icon5.gif, 
> Options Category = Info, Bug report, Bug fix, Question, Request, Comment, 
> Other
> icon6.gif, icon7.gif, icon8.gif, icon12.gif, icon13.gif, icon14.gif
> Required Attributes = Author, Author Email, Subject, Icon
> Subst on reply subject = Re: $subject
> Thread display = $subject, posted by $author on $Entry date
> Thread icon = Icon
> Remove on reply = Author, Author Email
> Date format = %B %d, %Y
> Preset Author = $long_name
> Preset Author Email = $user_email
> Locked Attributes = Author
> 
> ; Email notification
> Email message body = 1
> Display Email recipients = 0
  67217   Wed Mar 28 04:05:01 2012 Reply rusI ruslan.2008@hotmail.comCommentWindows2.9.1-2435Re: mySQL / SQL synchronisation
> does anybody has interest with a full synchronisation 
> between elog logbook
> on mySQL and SQL database

I am interested!!!
But I don't know how to do that.
  68328   Wed Jun 8 15:00:47 2016 Angy rudysylpid2007@gmail.comBug reportWindows3.113Self register = 0 not working ,

I have Split Elog to Two Top Group [Check the Config Below].

Problem = 

After Staff01 login successfully to http://127.0.0.1/Staff and if he/she fill the url http://127.0.0.1/Administrator and choose any elog topic, it will direct registration form.

 

[global]
port = 8080
Self register = 0
Show top groups = 1
Preset Author = $long_name
Locked Attributes = Author
Restrict edit = 1


Top group Staff = Website, Notes
Top group Administrator = Website Update, Admin Notes, Ticketing

[global Staff]
Menu commands = List, New, Edit, Reply, Duplicate, Find, Config
Password file = staff.pwd
Admin user = sylpid
Login user = staff01

[global Administrator]
Password file = admin.pwd
Admin user = sylpid
Login user = admin01

ELOG V3.1.5-3fb85fa6