Re: Need help with permission, posted by Stefan Ritt on Mon Sep 26 12:38:29 2022
|
Permissions are handled by the operating system and have nothing to do with elog. Make sure you run elog under an account which has write access to the
desired directories. Consult Ubuntu documentation how to do that. Sometimes it's helpful to start elog interactively with the -v flag to see some verbose
output. Maybe you can spot something there. |
|
Re: Need help with permission, posted by Stefan Ritt on Mon Sep 26 12:45:50 2022
|
Sometimes this can also be an SELinux issue, if you have that service running. Try "journalctl | grep denied" to see denied resources and consult
the SELinux documentation on how to fix that.
Stefan |
|
Re: Need help with permission, posted by Dan Witteman on Mon Sep 26 19:21:33 2022
|
I used "chown" to pass permissions from root to my deafult user, then restarted the service and now I can make posts. Thank you!
Stefan
Ritt wrote:
Sometimes this can also be an SELinux issue, if you have that service |
New user not working, posted by Gabriel Lopez on Thu May 20 21:01:41 2021
|
Running elog-3.1.4-3 Can't add users through the web interface. Clicking add user and writing all the fields in with something doesn't add
a user into the PWD file of that logbook. Running a tail -f on the password file shows elog writes the user info with the hashed password 3 times and then
deletes the information about 20 seconds later. Has anyone else had a similar issue? This is running on RHEL8.3 |
|
Problem with a self-compiled code., posted by Maxim on Mon May 31 14:51:39 2021
|
Dear, sir! There is a problem with a configuration file.
The code was compiled by Cygwin (gcc-core, gcc-g++, make, gdb, libssl-dev). After a compilation a reference to our own css-file was written
in configuration file and css-file was included in a folder “themes/default” of the project. |
|
Re: Problem with a self-compiled code., posted by Sebastian Schenk on Thu Jun 3 16:02:02 2021
|
Hello Maxim,
I just stumbled on a similar issue. Also with a self-compiled elogd on Ubuntu.
We also use a custom css and by clicking on the "New" or "Reply" or "Duplicate" the elog generates the entry editor. |
|
Re: Problem with a self-compiled code., posted by Maxim on Wed Jun 23 14:08:15 2021
|
Good afternoon Sebastian!
Thank you very much for your help.
Sebastian |
|
Timezome problem, posted by Maxim on Wed Jun 23 15:28:00 2021
|
Good afternoon!
The elog does not see the time zone. It displays UTC + 0. When I transfer old entries to a new compiled log, they are displayed 3 hours earlier
(my time zone is UTC + 3). When creating a new record, it creates them in the UTC + 0. |