Re: How to change elog directories in windows, posted by Stefan Ritt on Thu Jun 28 17:08:32 2007
|
| toumbi wrote: | Hi stephan , I remove elog and setup it again wiht the nis installer, and enter Z:\ELOG\ which is a mapping drive of my server directorie.
but it dont work. i have an error code 3 when i register the services with the shortcut "Register ELOG server service" . |
If you see the service config page, then the service is already registered, and you should not use the shortcut "Register ELOG server service" any more. Just change "Startup type" to "Automatic" or "Manual" and click on the "Start" button. |
|
Re: Error sending Email via "XXX.XXX.XXX.XXX", posted by Stefan Ritt on Thu Jun 28 17:12:11 2007
|
| JJ Sheppard wrote: | 220 Welcome to the @Mail v4.4 SMTP Server ( Exim )
EHLO server.XXXX.net
250-MX1.SPIDERHOST.COM Hello server.XXXX.net [XXX.XXX.XX.XX]
250-SIZE 10485760
250-PIPELINING
250-AUTH LOGIN
250 HELP
|
The problem there is that your SMPT server does not reply with
250 OK
which my server does. So elogd was waiting 3 seconds for "OK", and then aborted. I change the code (now in SVN revision 1871) to look for "250 " (with one blank at the end). You have to update from SVN, recompile and try again. Anyhow elogd only supports plain login authentication ("AUTH LOGIN"), which not all SMPT servers accept. You have to see. |
Re: How to change elog directories in windows, posted by toumbi on Thu Jun 28 17:20:18 2007 
|
| Stefan Ritt wrote: |
| toumbi wrote: | Hi stephan , I remove elog and setup it again wiht the nis installer, and enter Z:\ELOG\ which is a mapping drive of my server directorie.
but it dont work. i have an error code 3 when i register the services with the shortcut "Register ELOG server service" . |
If you see the service config page, then the service is already registered, and you should not use the shortcut "Register ELOG server service" any more. Just change "Startup type" to "Automatic" or "Manual" and click on the "Start" button. |
Hi again, See what happen when i install it on Z:\ELOG\ (it is a mapped drive of \\myserver\ELOG\)
Why code 3 ?
Ps: last time , i stopped and registered the service to copie the last version of elogd 1870 |
|
Re: How to change elog directories in windows, posted by Stefan Ritt on Thu Jun 28 17:23:24 2007
|
| toumbi wrote: | | Why code 3 ? |
No idea, this is an error coming from Windows. Try to start the service manually via the Service Manager, maybe you get some more error there. Or start elogd interactively in a DOS box, like
z:\ELOG\elogd.exe -v -c z:\ELOG\elogd.cfg
maybe there is some access rights conflict. |
|
Re: How to change elog directories in windows, posted by toumbi on Thu Jun 28 17:38:39 2007
|
| Stefan Ritt wrote: |
| toumbi wrote: | | Why code 3 ? |
No idea, this is an error coming from Windows. Try to start the service manually via the Service Manager, maybe you get some more error there. Or start elogd interactively in a DOS box, like
z:\ELOG\elogd.exe -v -c z:\ELOG\elogd.cfg
maybe there is some access rights conflict. |
When i start the service with start button it fail to lunch
but the command z:\ELOG\elogd.exe -v -c z:\ELOG\elogd.cfg work !!
Maybe The service doesn't have access right , ( i see it is Log on with Local System). |
|
Re: How to change elog directories in windows, posted by Stefan Ritt on Thu Jun 28 19:25:48 2007
|
| toumbi wrote: | | Maybe The service doesn't have access right , ( i see it is Log on with Local System). |
In that case it might help to run elog under your personal account. |
|
Re: Error sending Email via "XXX.XXX.XXX.XXX", posted by JJ Sheppard on Fri Jun 29 16:14:16 2007
|
| Stefan Ritt wrote: |
| JJ Sheppard wrote: | 220 Welcome to the @Mail v4.4 SMTP Server ( Exim )
EHLO server.XXXX.net
250-MX1.SPIDERHOST.COM Hello server.XXXX.net [XXX.XXX.XX.XX]
250-SIZE 10485760
250-PIPELINING
250-AUTH LOGIN
250 HELP
|
The problem there is that your SMPT server does not reply with
250 OK
which my server does. So elogd was waiting 3 seconds for "OK", and then aborted. I change the code (now in SVN revision 1871) to look for "250 " (with one blank at the end). You have to update from SVN, recompile and try again. Anyhow elogd only supports plain login authentication ("AUTH LOGIN"), which not all SMPT servers accept. You have to see. |
This is what I get now, Is this the Auth Login problem you were speaking of?
Email from elog@XXXXX.net to jsheppard@XXXXX.net, SMTP host XXX.XXX.XXX.XXX:
220-server.XXXXXX.net ESMTP Exim 4.66 #1 Fri, 29 Jun 2007 10:03:22 -0400
220-We do not authorize the use of this system to transport unsolicited,
220 and/or bulk e-mail.
EHLO server.tracstar.net
250-server.tracstar.net Hello server.XXXXXX.net [XXX.XXX.XXX.XXX]
250-SIZE 52428800
250-PIPELINING
250-AUTH PLAIN LOGIN
250-STARTTLS
250 HELP
AUTH LOGIN
Username:
XXXXXXXX
Password:
XXXXXXXX
535 Incorrect authentication data
==== Return ================================
HTTP/1.1 302 Found |
|
Re: Error sending Email via "XXX.XXX.XXX.XXX", posted by Stefan Ritt on Fri Jun 29 16:16:58 2007
|
| JJ Sheppard wrote: | This is what I get now, Is this the Auth Login problem you were speaking of?
Email from elog@XXXXX.net to jsheppard@XXXXX.net, SMTP host XXX.XXX.XXX.XXX:
220-server.XXXXXX.net ESMTP Exim 4.66 #1 Fri, 29 Jun 2007 10:03:22 -0400
220-We do not authorize the use of this system to transport unsolicited,
220 and/or bulk e-mail.
EHLO server.tracstar.net
250-server.tracstar.net Hello server.XXXXXX.net [XXX.XXX.XXX.XXX]
250-SIZE 52428800
250-PIPELINING
250-AUTH PLAIN LOGIN
250-STARTTLS
250 HELP
AUTH LOGIN
Username:
XXXXXXXX
Password:
XXXXXXXX
535 Incorrect authentication data
|
No. It looks like PLAIN LOGIN is supported, but your username/password is wrong. Ask your SMPT system administrator. |