Hey Terry,

I don't think this is possible, since in general you cannot define config settings in a way that it would only affect specific users. For example, you also cannot have different themes for different users (as stated here: https://midas.psi.ch/elogs/Forum/68112 )

Cheers

eddy

Hey,

I think this is a "problem" of the elog client, since it simply replaces the data. In most cases this is what you want, but since I wanted to have the option to append to the acutal message I built a function to first read-back the entry and add to the message instead of replacing it.

I just played around a bit and found that the attachments will be even disconnected, if you do not specify the -f parameter but just edit a different part of this entry.

A work-around for this is tricky. I tried to write to the "Attachment" attribute directly (-a "Attachment=Filename'), since then you coud read back the data first and manually add the filenames again. But this does not work.

Since the attachments are not actually removed, the only option I see is to modify the logbook file entry on the server by manually re-adding the filenames to the "Attachment: " line.

Hey,

I think this is a "problem" of the elog client, since it simply replaces the data. In most cases this is what you want, but since I wanted to have the option to append to the acutal message I built a function to first read-back the entry and add to the message instead of replacing it.

I just played around a bit and found that the attachments will be even disconnected, if you do not specify the -f parameter but just edit a different part of this entry.

A work-around for this is tricky. I tried to write to the "Attachment" attribute directly (-a "Attachment=Filename'), since then you coud read back the data first and manually add the filenames again. But this does not work.

Since the attachments are not actually removed, the only option I see is to modify the logbook file entry on the server by manually re-adding the filenames to the "Attachment: " line. But 

Using the elog client to upload atachments, I can successfully send attachments to an existing elog, however the existing attachments are lost.

I have tested using the elog client version 3.1.1 and elog client version 2.9.2 sending to elogd 2.9.0

elog -h localhost -p 8080 -l test -f  file1.png -f file2.png -e 249 -v -x

This works great, the text contained in the elog post is retained, however all attachments are lost and replaced with those sent by this command.

Can anyone provide some tips? I am not sure if its a problem with the client or server.

Thank you in advance!

Joseph

Using the elog client to upload atachments, I can successfully send attachments to an existing elog, however the existing attachments are lost.

I have tested using the elog client version 3.1.1 and elog client version 2.9.2 sending to elogd 2.9.0

elog -h localhost -p 8080 -l test -f  file1.png -f file2.png -e 249 -v -x

This works great, the text contained in the elog post is retained, however all attachments are lost and replaced with those sent by this command.

Can anyone provide some tips? I am not sure if its a problem with the client or server.

Thank you in advance!

Joseph

Good Morning,

I would like to limit the ability to edit certain attributes in an ELOG logbook, depending on the user who is logged in.  I.e. if "guest" or a standard "login user" is logged in, I only want to allow the user to edit "attribute1" & "attribute2" of say, 5 attributes.  However, if an Admin user or specific user, say "Terry" or "Bob" is logged in, I want to allow ALL 5 attributes to be editable.  To expand on this, I may want to even limit the visibility of the attributes as well.

I've read though "Condition Attributes" section of the help page, but it is not clear to me how/if I can do this?  Is that section even relevant to what I want to accomplish?

Can anyone provide some guidance?

Thank you for your time & help!

Sincerely,

Terry

Hey,

the syntax for creating links to other elog entries has a small issue in the HTML editor. The link will not be created properly if there are whitespaces in the name of the logbook. Using ELCode (or in a simple attribute field) the whitespaces can be replaced by "+", but this does not work in the HTML editor. The work-around would be to use ELCode mark-up instead of HTML.

Example 1 (this should work): elog:Contributions/47

Example 2 (this will not work): elog:Config+Examples/11

Example 3 (will also not work): elog:Config%20Examples/11

No, I don't think it is possible.