Demo Discussion
Forum Config Examples Contributions Vulnerabilities
  Discussion forum about ELOG, Page 215 of 806  Not logged in ELOG logo
 Find |  Login |  Help 
 Full | Summary | Threaded | Hide attachments  Show only new entries    6445 Entries 
Goto page Previous  1, 2, 3 ... 214, 215, 216 ... 804, 805, 806   Next  
ID Date Icon Author Author Emaildown Category OS ELOG Version Subject
  65965   Mon Sep 8 17:24:57 2008 Reply Stefan Rittstefan.ritt@psi.chQuestionLinux2.6.3Re: Is there a way to send email notification without attachment
Samuel Morris wrote:

Is there any way to send email notification of only the message and not the attachment. We get entries consisting of 10 MBs sometimes, and we would like to send only the message and not the attachment in the email notification. I tried restricting postfix to 1MB and using Email Format = 111 but with no success.

You have to use 

Email Format = 47

to remove the attachments. The encoding is decimal, not binary, so you have to do 1+2+4+8+32.

  65968   Tue Sep 9 08:40:41 2008 Reply Stefan Rittstefan.ritt@psi.chQuestionLinux Re: Is there a way to limit users to view only the entries they have created?

 

Herman Sherman wrote:

We are using elog to allow users to enter their time spent on a project and we would like them to be able to see the entries that they themselves have

created but not the entries that other users have created.

Thanks,

Herman

 

 In that case you have to make one logbook per user and restrict the access to it using the "Login user = ..." directive.

  65969   Tue Sep 9 08:42:52 2008 Reply Stefan Rittstefan.ritt@psi.chQuestionLinux2.6.3Re: Is there a way to send email notification without attachment

 

Samuel Morris wrote:

 

Stefan Ritt wrote:
Samuel Morris wrote:

Is there any way to send email notification of only the message and not the attachment. We get entries consisting of 10 MBs sometimes, and we would like to send only the message and not the attachment in the email notification. I tried restricting postfix to 1MB and using Email Format = 111 but with no success.

You have to use 

Email Format = 47

to remove the attachments. The encoding is decimal, not binary, so you have to do 1+2+4+8+32.

 

 Dear Stefan,

I tried Email Format =47 . still am having problems.

With Postfix limitation of 1MB elog is giving error message of 'Error sending Email via "<domain name>": 5.3.4 Error: message file too big

Without Postfix limitation, its sending email with the attachment.

Thanks

 

 I guess you are modifying the wrong elogd.cfg file. Note that you have to send a HUP signal after you changed elgod.cfg for the daemon to re-read the file. Try modifying something else (like adding a new attribute) and see if the daemon sees the change.

  65971   Tue Sep 9 11:55:59 2008 Reply Stefan Rittstefan.ritt@psi.chQuestionLinux2.6.3Re: Is there a way to send email notification without attachment
Samuel Morris wrote:

  Adding a new attribute is working fine... Has it to do with the elog 2.6.3 version and also I downloaded from ubuntu's synaptic package.. Will the latest release of elog solves this problem???

I don't remember exactly when this feature was added, but it would well be that it was after 2.6.3, so upgrading would help. 

 

  65975   Mon Sep 15 08:51:57 2008 Reply Stefan Rittstefan.ritt@psi.chQuestionLinux2.7.4Re: Is there a way to send email notification without attachment

 

Samuel Morris wrote:

 

Stefan Ritt wrote:
Samuel Morris wrote:

  Adding a new attribute is working fine... Has it to do with the elog 2.6.3 version and also I downloaded from ubuntu's synaptic package.. Will the latest release of elog solves this problem???

I don't remember exactly when this feature was added, but it would well be that it was after 2.6.3, so upgrading would help. 

 

 

 Thanks Stefan. Now I have installed 2.7.4 and the problem is solved. but am having another problem. Elog is giving the same error message if the logbook has more than 5 subscribers for email notification. Upto 5 subscribers it works fine. I am sure its not postfix problem as I am able to send to more than 5 addresses in pine.

 

 There is no limitation with 5 addresses in elog. What you can do however is to turn on debugging and watch the communication between elog and your SMTP server. To do so, start elogd interactively with the "-v" flag (='verbose'), send an message and watch the output. Maybe your SMTP server sends some error code to elogd.

  65977   Mon Sep 15 16:34:18 2008 Reply Stefan Rittstefan.ritt@psi.chBug reportWindows2.7.4Re: Install on Server 2003:

 

Wythe IT wrote:

I am using Windows Server 2003 R2 Standard Edition.  It is up-to-date and a full legal version installed from a geniune MS disk (to put that notion out the way).  I host a variety of webpages from this server through IIS6.0.

I am having an issue after installation of the ELOG software.  I grabbed the newest version from this website and ran the executable.  It installed fine (or appeared to do so).

Upon starting the ELOG server I receive the following error:

elogd.exe - Unable to Locate Component

This application has failed to start because MSVCR71.dll was not found.  Re-installing the application may fix this problem.

 

The file in question is part of an ancient Visual C distributeable.  This distributeable for my purposes no longer appears to be available (as I am on .net 3.5).  I am unsure of downloading the older runtime libraries from sites that are not microsoft's.  I am curious as to how I could go about making elog execute.  Any help would be appreciated.  Thank you!

 

 I didn't realize that MSCVR71.dll is kind of outphased. I will add it to future distributions. For the moment, you can download it from the elog server directly.

  65980   Wed Sep 17 22:41:18 2008 Reply Stefan Rittstefan.ritt@psi.chQuestionWindows2.7.4-2111Re: Default list option

 

George Chisholm wrote:

How do I set a default list option?
 I have an attribute called Active with options yes, no
When I do a list I want to see just the records having yes.
When required, the quick filter allows me to see records with option = no or all the records.
Thanks

 

 There is a trick. Use

Start page = ?Active=yes

and use a quick filter on "Active". This will always start with a list where Active=yes.

  65981   Thu Sep 18 14:39:17 2008 Reply Stefan Rittstefan.ritt@psi.chQuestionLinux Re: Moving individual messages in a thread

 

Eoin Butler wrote:

It is possible that the Move to... and Copy to... commands can be configured so that when they operate on a message that is part of a thread, that only that message will be moved, instead of the whole thread?

 

 This has not been implemented on purpose. Assume you have a thread with

A

    B

       C

So A links to B, B links back to A and so on. If you would move now B into another logbook, A and C would point to an entry which does not exist any more. Furthermore, C may contain some sentences which are a reply to something which has been said in B. So even if the "Move To" mechanism would re-link A to C and C to A, the entry C would maybe make no sense any more if B is missing. That's why you only can move threads as a whole. If you want to move individual messages, don't use replies. You can actually disable the reply command in the configuration file.

Goto page Previous  1, 2, 3 ... 214, 215, 216 ... 804, 805, 806   Next  
ELOG V3.1.5-3fb85fa6