| ID |
Date |
Icon |
Author |
Author Email |
Category |
OS |
ELOG Version |
Subject |
|
68521
|
Tue Jan 3 09:20:23 2017 |
 | Andreas Luedeke | andreas.luedeke@psi.ch | Question | Mac OSX | 3.1.2 | Re: elogd crashes during Find and Mirror operations under MacOS | I have no experience with ELOG on OSX, therefore I can only give very vague and indirect support (sorry).
I suggest that you first try an installation without actual logbook data (just move it to a save place for a while). Does a "find" still crash elogd?
If elogd is still crashing, you should prune your configuration until it stops crashing. Submit the smallest config here that still crashes the logbook.
Since the logbook starts crashing after a sync, I would rather guess that it is somehow related to specific logbook entries. It would be helpful if you could isolate the offending entries.
Another approach would be to compile elogd with "make debug" and run it in the debugger. Once it crashes the debugger will show where it happened.
Happy New Year! Andreas
| Andreas Warburton wrote: |
|
When installing ELOG 3.1.2 on my Mac Sierra (10.12.2) with the latest XCode 8.2.1, it seemed to install fine but for one warning when building elogd:
cc -O3 -funroll-loops -fomit-frame-pointer -W -Wall -Wno-deprecated-declarations -DHAVE_SSL -I /opt/local/include -o elogd
src/elogd.c crypt.o auth.o regex.o mxml.o -lssl
src/elogd.c:13840:13: warning: '__builtin___strlcpy_chk' will always overflow
destination buffer [-Wbuiltin-memcpy-chk-size]
strlcpy(user_email, user_list[i], NAME_LENGTH);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
/usr/include/secure/_string.h:105:3: note: expanded from macro 'strlcpy'
__builtin___strlcpy_chk (dest, src, len, __darwin_obsz (dest))
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
1 warning generated.
My installation was done with "sudo make install", as the instructions state. I have also been using the prescribed "launchctl" approach.
1. Is the above warning something that needs attention/correcting?
2. My elogd crashes now every time that I attempt any kind of "Find" operation.
3. I synchronize my MacOS version of elog with a linux-based version on my university's web server. I have installed 3.1.2 on the linux server, and it is running there without problems. When I now try to synchronize my 3.1.2 ELOG on MacOS laptop with the same version on my linux server, it appears to do the first mirroring operation correctly, but elogd crashes when I try a second synchronization at a later time. (For now, I have "Mirror simulate = 1" to prevent inadvertent damage.)
Can anyone help me with the above points?
Thank you,
Andreas
|
|
|
68522
|
Tue Jan 3 09:44:18 2017 |
| Stefan Ritt | stefan.ritt@psi.ch | Question | Mac OSX | 3.1.2 | Re: elogd crashes during Find and Mirror operations under MacOS | The current GIT revision (c017d07) fixes the problem with the strlcpy() function (macOS 10.12.2, XCode 8.2). Can you try if that fixes your other problems, too?
Plese remember to use the recursive clone to get that version:
git clone https://bitbucket.org/ritt/elog --recursive
Stefan
| Andreas Warburton wrote: |
|
When installing ELOG 3.1.2 on my Mac Sierra (10.12.2) with the latest XCode 8.2.1, it seemed to install fine but for one warning when building elogd:
cc -O3 -funroll-loops -fomit-frame-pointer -W -Wall -Wno-deprecated-declarations -DHAVE_SSL -I /opt/local/include -o elogd
src/elogd.c crypt.o auth.o regex.o mxml.o -lssl
src/elogd.c:13840:13: warning: '__builtin___strlcpy_chk' will always overflow
destination buffer [-Wbuiltin-memcpy-chk-size]
strlcpy(user_email, user_list[i], NAME_LENGTH);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
/usr/include/secure/_string.h:105:3: note: expanded from macro 'strlcpy'
__builtin___strlcpy_chk (dest, src, len, __darwin_obsz (dest))
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
1 warning generated.
My installation was done with "sudo make install", as the instructions state. I have also been using the prescribed "launchctl" approach.
1. Is the above warning something that needs attention/correcting?
2. My elogd crashes now every time that I attempt any kind of "Find" operation.
3. I synchronize my MacOS version of elog with a linux-based version on my university's web server. I have installed 3.1.2 on the linux server, and it is running there without problems. When I now try to synchronize my 3.1.2 ELOG on MacOS laptop with the same version on my linux server, it appears to do the first mirroring operation correctly, but elogd crashes when I try a second synchronization at a later time. (For now, I have "Mirror simulate = 1" to prevent inadvertent damage.)
Can anyone help me with the above points?
Thank you,
Andreas
|
|
|
Draft
|
Tue Jan 3 12:43:56 2017 |
| Andreas Warburton | awarburt@physics.mcgill.ca | Question | Mac OSX | 3.1.2 | Re: elogd crashes during Find and Mirror operations under MacOS |
| Stefan Ritt wrote: |
|
The current GIT revision (c017d07) fixes the problem with the strlcpy() function (macOS 10.12.2, XCode 8.2). Can you try if that fixes your other problems, too?
Plese remember to use the recursive clone to get that version:
git clone https://bitbucket.org/ritt/elog --recursive
Stefan
| Andreas Warburton wrote: |
|
When installing ELOG 3.1.2 on my Mac Sierra (10.12.2) with the latest XCode 8.2.1, it seemed to install fine but for one warning when building elogd:
cc -O3 -funroll-loops -fomit-frame-pointer -W -Wall -Wno-deprecated-declarations -DHAVE_SSL -I /opt/local/include -o elogd
src/elogd.c crypt.o auth.o regex.o mxml.o -lssl
src/elogd.c:13840:13: warning: '__builtin___strlcpy_chk' will always overflow
destination buffer [-Wbuiltin-memcpy-chk-size]
strlcpy(user_email, user_list[i], NAME_LENGTH);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
/usr/include/secure/_string.h:105:3: note: expanded from macro 'strlcpy'
__builtin___strlcpy_chk (dest, src, len, __darwin_obsz (dest))
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
1 warning generated.
My installation was done with "sudo make install", as the instructions state. I have also been using the prescribed "launchctl" approach.
1. Is the above warning something that needs attention/correcting?
2. My elogd crashes now every time that I attempt any kind of "Find" operation.
3. I synchronize my MacOS version of elog with a linux-based version on my university's web server. I have installed 3.1.2 on the linux server, and it is running there without problems. When I now try to synchronize my 3.1.2 ELOG on MacOS laptop with the same version on my linux server, it appears to do the first mirroring operation correctly, but elogd crashes when I try a second synchronization at a later time. (For now, I have "Mirror simulate = 1" to prevent inadvertent damage.)
Can anyone help me with the above points?
Thank you,
Andreas
|
|
|
|
68524
|
Tue Jan 3 12:45:13 2017 |
| Andreas Warburton | awarburt@physics.mcgill.ca | Question | Mac OSX | 3.1.2 | Re: elogd crashes during Find and Mirror operations under MacOS | Thank you very much (both Andreas and Stefan)! The build now runs without warnings, and I am now able to do Find operations without crashes. I still am having some issues with the synchronization, but I suspect that this is elog-content related, so will in the coming days do some more testing from CERN (where I have higher bandwidth with my home institution in Canada). Incidentally, I had to add a line to Makefile in order to be able to build on my Mac. See below, in case you want to update the Mac Makefile for others.
Many thanks again,
Andreas
ifdef USE_SSL
ifneq ($(USE_SSL),0)
CFLAGS += -DHAVE_SSL
CFLAGS += -I /opt/local/include
LIBS += -lssl
endif
endif
(You may wish to update the distribution if you think it may benefit other Mac users.)
| Stefan Ritt wrote: |
|
The current GIT revision (c017d07) fixes the problem with the strlcpy() function (macOS 10.12.2, XCode 8.2). Can you try if that fixes your other problems, too?
Plese remember to use the recursive clone to get that version:
git clone https://bitbucket.org/ritt/elog --recursive
Stefan
| Andreas Warburton wrote: |
|
When installing ELOG 3.1.2 on my Mac Sierra (10.12.2) with the latest XCode 8.2.1, it seemed to install fine but for one warning when building elogd:
cc -O3 -funroll-loops -fomit-frame-pointer -W -Wall -Wno-deprecated-declarations -DHAVE_SSL -I /opt/local/include -o elogd
src/elogd.c crypt.o auth.o regex.o mxml.o -lssl
src/elogd.c:13840:13: warning: '__builtin___strlcpy_chk' will always overflow
destination buffer [-Wbuiltin-memcpy-chk-size]
strlcpy(user_email, user_list[i], NAME_LENGTH);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
/usr/include/secure/_string.h:105:3: note: expanded from macro 'strlcpy'
__builtin___strlcpy_chk (dest, src, len, __darwin_obsz (dest))
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
1 warning generated.
My installation was done with "sudo make install", as the instructions state. I have also been using the prescribed "launchctl" approach.
1. Is the above warning something that needs attention/correcting?
2. My elogd crashes now every time that I attempt any kind of "Find" operation.
3. I synchronize my MacOS version of elog with a linux-based version on my university's web server. I have installed 3.1.2 on the linux server, and it is running there without problems. When I now try to synchronize my 3.1.2 ELOG on MacOS laptop with the same version on my linux server, it appears to do the first mirroring operation correctly, but elogd crashes when I try a second synchronization at a later time. (For now, I have "Mirror simulate = 1" to prevent inadvertent damage.)
Can anyone help me with the above points?
Thank you,
Andreas
|
|
|
|
68525
|
Tue Jan 3 12:58:13 2017 |
| Stefan Ritt | stefan.ritt@psi.ch | Question | Mac OSX | 3.1.2 | Re: elogd crashes during Find and Mirror operations under MacOS | Ah, thanks for telling me. I added that to the Makefile. I did not need this because I had in my .profiel following line
export C_INCLUDE_PATH=/opt/local/include
which I need also for other macports-based projects. But having this twice does not hurt.
/Stefan
| Andreas Warburton wrote: |
|
Incidentally, I had to add a line to Makefile in order to be able to build on my Mac. See below, in case you want to update the Mac Makefile for others.
Many thanks again,
Andreas
ifdef USE_SSL
ifneq ($(USE_SSL),0)
CFLAGS += -DHAVE_SSL
CFLAGS += -I /opt/local/include
LIBS += -lssl
endif
endif
(You may wish to update the distribution if you think it may benefit other Mac users.)
|
|
|
68526
|
Thu Jan 5 12:55:05 2017 |
 | Xuan Wu | wux@ihep.ac.cn | Question | Linux | 3.1.2 | How to make two attributes reacting with each other | Hi all,
I have two attributes defined like following
Attributes = Author, Author Email, Icon, Category, System, Subject
ROptions Category = Shift Summary, Report, Reply, Fault, Issue, Resolved, Maintenance
IOptions Icon = icon1.gif, elc_list.png, icon3.gif, icon8.gif, icon4.gif, icon14.gif, elc_anchor.png
Icon comment icon1.gif = Shift Summary
Icon comment icon3.gif = Reply
Icon comment icon4.gif = Issue
Icon comment icon8.gif = Fault
Icon comment icon14.gif = Resolved
Icon comment elc_list.png = Report
Icon comment elc_anchor.png = Maintenance
When the Shift Summary category being selected, I wish the icon1.gif Icon being selected automaticlly, as well as when icon8.gif being selected, Fault category be selected. How can I get this? Any advice or suggestions will be appreciated.
Cheers,
Xuan |
|
68527
|
Thu Jan 5 13:24:06 2017 |
| Stefan Ritt | stefan.ritt@psi.ch | Question | Linux | 3.1.2 | Re: How to make two attributes reacting with each other | You can do that with conditional attributes (see documentation):
Attributes = Author, Author Email, Icon, Category, System, Subject
Options Category = Shift Summary{1}, Report{2}, Reply{3}, Fault{4}, Issue{5}, Resolved{6}, Maintenance{7}
IOptions Icon = icon1.gif, elc_list.png, icon3.gif, icon8.gif, icon4.gif, icon14.gif, elc_anchor.png
{1} Preset Icon = icon1.gif
{2} Preset Icon = elc_list.png
{3} Preset Icon = icon3.gif
{4} Preset Icon = icon8.gif
{5} Preset Icon = icon4.gif
{6} Preset Icon = icon14.gif
{7} Preset Icon = elc_anchor.gif
Icon comment icon1.gif = Shift Summary
Icon comment icon3.gif = Reply
Icon comment icon4.gif = Issue
Icon comment icon8.gif = Fault
Icon comment icon14.gif = Resolved
Icon comment elc_list.png = Report
Icon comment elc_anchor.png = Maintenance
| Xuan Wu wrote: |
|
Hi all,
I have two attributes defined like following
Attributes = Author, Author Email, Icon, Category, System, Subject
ROptions Category = Shift Summary, Report, Reply, Fault, Issue, Resolved, Maintenance
IOptions Icon = icon1.gif, elc_list.png, icon3.gif, icon8.gif, icon4.gif, icon14.gif, elc_anchor.png
Icon comment icon1.gif = Shift Summary
Icon comment icon3.gif = Reply
Icon comment icon4.gif = Issue
Icon comment icon8.gif = Fault
Icon comment icon14.gif = Resolved
Icon comment elc_list.png = Report
Icon comment elc_anchor.png = Maintenance
When the Shift Summary category being selected, I wish the icon1.gif Icon being selected automaticlly, as well as when icon8.gif being selected, Fault category be selected. How can I get this? Any advice or suggestions will be appreciated.
Cheers,
Xuan
|
|
|
68528
|
Thu Jan 5 14:04:13 2017 |
| Xuan Wu | wux@ihep.ac.cn | Question | Linux | 3.1.2 | Re: How to make two attributes reacting with each other | Thanks for your quick reply! I just test what you suggested, even I test {1} Preset on edit Icon = icon1.gif, they both didn't work.
| Stefan Ritt wrote: |
|
You can do that with conditional attributes (see documentation):
Attributes = Author, Author Email, Icon, Category, System, Subject
Options Category = Shift Summary{1}, Report{2}, Reply{3}, Fault{4}, Issue{5}, Resolved{6}, Maintenance{7}
IOptions Icon = icon1.gif, elc_list.png, icon3.gif, icon8.gif, icon4.gif, icon14.gif, elc_anchor.png
{1} Preset Icon = icon1.gif
{2} Preset Icon = elc_list.png
{3} Preset Icon = icon3.gif
{4} Preset Icon = icon8.gif
{5} Preset Icon = icon4.gif
{6} Preset Icon = icon14.gif
{7} Preset Icon = elc_anchor.gif
Icon comment icon1.gif = Shift Summary
Icon comment icon3.gif = Reply
Icon comment icon4.gif = Issue
Icon comment icon8.gif = Fault
Icon comment icon14.gif = Resolved
Icon comment elc_list.png = Report
Icon comment elc_anchor.png = Maintenance
| Xuan Wu wrote: |
|
Hi all,
I have two attributes defined like following
Attributes = Author, Author Email, Icon, Category, System, Subject
ROptions Category = Shift Summary, Report, Reply, Fault, Issue, Resolved, Maintenance
IOptions Icon = icon1.gif, elc_list.png, icon3.gif, icon8.gif, icon4.gif, icon14.gif, elc_anchor.png
Icon comment icon1.gif = Shift Summary
Icon comment icon3.gif = Reply
Icon comment icon4.gif = Issue
Icon comment icon8.gif = Fault
Icon comment icon14.gif = Resolved
Icon comment elc_list.png = Report
Icon comment elc_anchor.png = Maintenance
When the Shift Summary category being selected, I wish the icon1.gif Icon being selected automaticlly, as well as when icon8.gif being selected, Fault category be selected. How can I get this? Any advice or suggestions will be appreciated.
Cheers,
Xuan
|
|
|
|