How to sort on any field?, posted by John on Tue Apr 30 05:52:44 2019
|
Hi, I was wondering if this is possible. I've tried to sort on anything other than the first few fields and although the screen refreshes like it
is 'doing something', it does NOT sort. Sometimes it will take me to the last page of my data, but still no sorting. I use Debian Linux verson
of Elog. There have been no other issues. I need to figure out how to do this without parsing it to another program first. Thanks again for this wonderful |
Re: How to sort on any field?, posted by Andreas Luedeke on Tue Apr 30 14:20:34 2019
|
Sorting does work fine, if you do it correctly. From your post I cannot even guess what you've tried - let alone tell you what you did wrong.
Please post your config, some example entries and a description of what you've tried, what you expected to happen and what actually happened.
Screenshots are often very useful as well. |
Re: How to sort on any field?, posted by John on Tue Apr 30 19:07:17 2019
|
Hi Andrea and thank you soo much for your kind and prompt reply! I believe the issue will be solved as I have the information I need to proceed.
I was just wanting to verify that sorting indeed is alloud on ALL fields. I cannot send the exact config as it is a work project, but I can replicate
with fake fields and data if necessary in the future. I believe my errors are because I am either using field names which are 'special' to the |
|
hosts allow, posted by Susan James on Fri Nov 17 18:58:52 2017
|
I'm trying to wrap our elog instance to our company domain which is lbl.gov
I add this entry below (without quotes) to elogd.cfg and it's not working. the world can see our logbooks
" Hosts Allow = *.lbl.gov ". |
|
Re: hosts allow, posted by Andreas Luedeke on Sat Nov 18 19:36:57 2017
|
Hi Susan,
according to the documentation you need to add "Hosts deny = All" in addition to the "Hosts allow" command.
Here
is the relevant excerpt from the documentation (https://midas.psi.ch/elog/config.html#access).
Cheers
Andreas
Hosts |
|
Re: hosts allow, posted by Susan James on Tue Nov 21 01:27:06 2017
|
thanks for your quick reply.
the configuration is still not working. See my entry below which denies everyone.
I've tried many different combinations of 'hosts allow and hosts deny' |
|
Re: hosts allow, posted by Susan James on Thu Dec 7 21:54:58 2017
|
Hi All,
We're still having trouble with hosts.allow and hosts.deny.
We're trying to allow all of our domain lbl.gov to the access list |
|
Re: hosts allow, posted by Andreas Luedeke on Fri Dec 8 19:47:04 2017
|
Hi Susan,
the documentation states that you should start elogd with the -v option from the command line and look at the output. Did you
try this?
You might post the output here to get further help.
Cheers
Andreas
Susan James wrote:
|