Re: Execute new|edit doesn't seem to work, posted by Juergen Diefenbach on Mon Mar 7 13:03:13 2016
|
| Andreas Luedeke wrote: | I'm just guessing, but you could try to disable the "save drafts" feature and see if the behaviour changes:
Save drafts = 0
If that is the case then Stefan will know where to look 
Cheers
Andreas |
Alright, I tried "Save drafts = 0" in the config file and now it seems to work all the time as expected!
Thank you, Andreas!
In principle I could live with this as I don't think I need to have drafts enabled.
Cheers,
Jürgen |
|
Re: Execute new|edit doesn't seem to work, posted by Andreas Luedeke on Tue Mar 8 14:12:26 2016
|
| Juergen Diefenbach wrote: |
| Andreas Luedeke wrote: | I'm just guessing, but you could try to disable the "save drafts" feature and see if the behaviour changes:
Save drafts = 0
If that is the case then Stefan will know where to look
Cheers
Andreas |
Alright, I tried "Save drafts = 0" in the config file and now it seems to work all the time as expected!
Thank you, Andreas!
In principle I could live with this as I don't think I need to have drafts enabled.
Cheers,
Jürgen |
I would speculate that "Execute new" is not executed, when a draft is saved (as one would expect, since it's only a draft), but is neither executed when a draft is submitted (not as one would expect).
Good that you're fine for the moment.
If you could add a minimal configuration to reproduce the problem, then Stefan would have it easier to debug it. |
|
Installation: Failed Dependencies, posted by Phil Rubin on Fri Mar 11 17:19:02 2016
|
Is there anything I can do about this?
kernel: 2.6.32-279.14.1.el6.x86_64
ldd (GNU libc) 2.12
/lib64/libc.so.6
/usr/lib64/libssl.so.10
rpm -i elog-latest.i386.rpm
error: Failed dependencies:
libc.so.6 is needed by elog-3.1.1-1.i386
libc.so.6(GLIBC_2.0) is needed by elog-3.1.1-1.i386
libc.so.6(GLIBC_2.1) is needed by elog-3.1.1-1.i386
libc.so.6(GLIBC_2.1.3) is needed by elog-3.1.1-1.i386
libc.so.6(GLIBC_2.3) is needed by elog-3.1.1-1.i386
libssl.so.6 is needed by elog-3.1.1-1.i386 |
Installation: Failed Dependencies, posted by Phil Rubin on Fri Mar 11 17:29:47 2016
|
Is there anything I can do about this?
kernel: 2.6.32-279.14.1.el6.x86_64
ldd (GNU libc) 2.12
/lib64/libc.so.6
/usr/lib64/libssl.so.10
rpm -i elog-latest.i386.rpm
error: Failed dependencies:
libc.so.6 is needed by elog-3.1.1-1.i386
libc.so.6(GLIBC_2.0) is needed by elog-3.1.1-1.i386
libc.so.6(GLIBC_2.1) is needed by elog-3.1.1-1.i386
libc.so.6(GLIBC_2.1.3) is needed by elog-3.1.1-1.i386
libc.so.6(GLIBC_2.3) is needed by elog-3.1.1-1.i386
libssl.so.6 is needed by elog-3.1.1-1.i386 |
|
Re: Installation: Failed Dependencies, posted by Phil Rubin on Fri Mar 11 18:59:30 2016
|
I attempted instead to build from the tar ball, and, except for a "fatal" git error, make built elogd, elog, and elconv. I put the first in /usr/local/sbin, and the latter two in /usr/local/bin, and then restarted elogd, but this didn't work:
Service Temporarily Unavailable
The server is temporarily unable to service your request due to maintenance downtime or capacity problems. Please try again later.
So, I backed these out and restored the previous executables, and access to the elog was restored, and the elogd.cfg accessed is the original one, but all logbooks are empty and requiring authentication. The logbook directories still contain all the old entries, so I'm not sure what has happened.
Thanks for your advice.
Phil
| Phil Rubin wrote: |
|
Is there anything I can do about this?
kernel: 2.6.32-279.14.1.el6.x86_64
ldd (GNU libc) 2.12
/lib64/libc.so.6
/usr/lib64/libssl.so.10
rpm -i elog-latest.i386.rpm
error: Failed dependencies:
libc.so.6 is needed by elog-3.1.1-1.i386
libc.so.6(GLIBC_2.0) is needed by elog-3.1.1-1.i386
libc.so.6(GLIBC_2.1) is needed by elog-3.1.1-1.i386
libc.so.6(GLIBC_2.1.3) is needed by elog-3.1.1-1.i386
libc.so.6(GLIBC_2.3) is needed by elog-3.1.1-1.i386
libssl.so.6 is needed by elog-3.1.1-1.i386
|
|
|
Re: Installation: Failed Dependencies, posted by Phil Rubin on Fri Mar 11 19:24:11 2016
|
OK. I found the source of the logbook problem in an exchange from May 2015, so no need to answer this one.
But I would like to be able to upgrade to 3.x from 2.9, so any help with this will be much appreciated.
Phil
| Phil Rubin wrote: |
|
I attempted instead to build from the tar ball, and, except for a "fatal" git error, make built elogd, elog, and elconv. I put the first in /usr/local/sbin, and the latter two in /usr/local/bin, and then restarted elogd, but this didn't work:
Service Temporarily Unavailable
The server is temporarily unable to service your request due to maintenance downtime or capacity problems. Please try again later.
So, I backed these out and restored the previous executables, and access to the elog was restored, and the elogd.cfg accessed is the original one, but all logbooks are empty and requiring authentication. The logbook directories still contain all the old entries, so I'm not sure what has happened.
Thanks for your advice.
Phil
| Phil Rubin wrote: |
|
Is there anything I can do about this?
kernel: 2.6.32-279.14.1.el6.x86_64
ldd (GNU libc) 2.12
/lib64/libc.so.6
/usr/lib64/libssl.so.10
rpm -i elog-latest.i386.rpm
error: Failed dependencies:
libc.so.6 is needed by elog-3.1.1-1.i386
libc.so.6(GLIBC_2.0) is needed by elog-3.1.1-1.i386
libc.so.6(GLIBC_2.1) is needed by elog-3.1.1-1.i386
libc.so.6(GLIBC_2.1.3) is needed by elog-3.1.1-1.i386
libc.so.6(GLIBC_2.3) is needed by elog-3.1.1-1.i386
libssl.so.6 is needed by elog-3.1.1-1.i386
|
|
|
|
Re: Installation: Failed Dependencies, posted by Darren Hollinrake on Sat Mar 19 15:24:29 2016
|
I did the following on CentOS 6.7 (Should work for Fedora and RHEL as well):
yum install -y wget
wget http://midas.psi.ch/elog/download/RPMS/elog-latest.i386.rpm
yum install -y elog-latest.i386.rpm
This should install all the required dependencies.
| Phil Rubin wrote: |
|
Is there anything I can do about this?
kernel: 2.6.32-279.14.1.el6.x86_64
ldd (GNU libc) 2.12
/lib64/libc.so.6
/usr/lib64/libssl.so.10
rpm -i elog-latest.i386.rpm
error: Failed dependencies:
libc.so.6 is needed by elog-3.1.1-1.i386
libc.so.6(GLIBC_2.0) is needed by elog-3.1.1-1.i386
libc.so.6(GLIBC_2.1) is needed by elog-3.1.1-1.i386
libc.so.6(GLIBC_2.1.3) is needed by elog-3.1.1-1.i386
libc.so.6(GLIBC_2.3) is needed by elog-3.1.1-1.i386
libssl.so.6 is needed by elog-3.1.1-1.i386
|
|
|
How to login and export to CSV using wget?, posted by Alan Grant on Sun Apr 24 02:09:47 2016
|
Is it possible to use wget to log into elog and export all of a logbook's data into a CSV file?
I can accomplish this perfectly when authentication IS NOT required by using: wget --no-check-certificate -O e:\export.csv http://localhost:8080/demo/?mode=CSV1
However, I cannot accomplish it when authentication IS required by using: wget --no-check-certificate -O e:\export.csv "http://localhost:8080/demo/?mode=CSV1&uname=agrant&upassword=skipper"
The latter appears to show that I've logged in, but the export file only contains a bunch of HTML tags, not the actual data as in the former.
How should I construct the wget command?
|