Re: Multiple outcomes to a conditional attribute, posted by Stefan Ritt on Tue Jul 12 08:44:52 2016
|
| Stefan Ritt wrote: |
|
What about this:
Options Type = Fault{1}, Test{2}, Report{3}
{1} Options Fault Status = Open{a}, Fixed{b}
{2,3} Preset Fault Status = NA
{1} Preset Icon = attn.png
{2,3} Preset Icon = icon1.gif
-Stefan
| Sofian Jafar wrote: |
|
Hi,
First of all, thanks for all the great work, we all thank you here at SESAME synchrotron 
I am trying to set a conditional attribute where selecting one option in that attribute should trigger multiple outcomes as shown below:
Options Type = Fault{1_1&1_2}, Test{2_1&2_2}, Report{2_1&2_2}
{1_1} Options Fault Status = Open{a}, Fixed{b}
{2_1} Preset Fault Status = NA
{1_2} Preset Icon = attn.png
{2_2} Preset Icon = icon1.gif
I tries adding "&" as shown but that didn't work, my goal is to have 1_1 and 1_2 triggered whenever I select "Fault" as type, how can I do that?
Thanks in advance.
Cheers,
Sofian.
|
|
|
|
Re: Multiple outcomes to a conditional attribute, posted by Sofian Jafar on Tue Jul 12 09:15:35 2016
|
Thanks Andreas,
Works great.
I tried reading the documentation on this but I was not able to deduce this solution.
Thanks a lot again.
| Andreas Luedeke wrote: |
|
Hi Sofian,
it should work like this:
Options Type = Fault{1}, Test{2}, Report{3}
{1} Options Fault Status = Open{a}, Fixed{b}
{2,3} Preset Fault Status = NA
{1} Preset Icon = attn.png
{2,3} Preset Icon = icon1.gif
It is described under "Multiple conditions" in the documentation (https://midas.psi.ch/elog/config.html#conditional).
Cheers and good luck!
Andreas
| Sofian Jafar wrote: |
|
Hi,
First of all, thanks for all the great work, we all thank you here at SESAME synchrotron
I am trying to set a conditional attribute where selecting one option in that attribute should trigger multiple outcomes as shown below:
Options Type = Fault{1_1&1_2}, Test{2_1&2_2}, Report{2_1&2_2}
{1_1} Options Fault Status = Open{a}, Fixed{b}
{2_1} Preset Fault Status = NA
{1_2} Preset Icon = attn.png
{2_2} Preset Icon = icon1.gif
I tries adding "&" as shown but that didn't work, my goal is to have 1_1 and 1_2 triggered whenever I select "Fault" as type, how can I do that?
Thanks in advance.
Cheers,
Sofian.
|
|
|
|
Re: Multiple outcomes to a conditional attribute, posted by Sofian Jafar on Tue Jul 12 09:17:03 2016
|
Thank you Stefan as well
| Stefan Ritt wrote: |
|
What about this:
Options Type = Fault{1}, Test{2}, Report{3}
{1} Options Fault Status = Open{a}, Fixed{b}
{2,3} Preset Fault Status = NA
{1} Preset Icon = attn.png
{2,3} Preset Icon = icon1.gif
-Stefan
| Sofian Jafar wrote: |
|
Hi,
First of all, thanks for all the great work, we all thank you here at SESAME synchrotron
I am trying to set a conditional attribute where selecting one option in that attribute should trigger multiple outcomes as shown below:
Options Type = Fault{1_1&1_2}, Test{2_1&2_2}, Report{2_1&2_2}
{1_1} Options Fault Status = Open{a}, Fixed{b}
{2_1} Preset Fault Status = NA
{1_2} Preset Icon = attn.png
{2_2} Preset Icon = icon1.gif
I tries adding "&" as shown but that didn't work, my goal is to have 1_1 and 1_2 triggered whenever I select "Fault" as type, how can I do that?
Thanks in advance.
Cheers,
Sofian.
|
|
|
Calculations & Interfacing a DataBase with Elog., posted by John on Sat Jun 22 06:52:32 2019
|
Hi, I am trying to calculate two or more Elog fields and then return the value to Elog. I am currently learning Perl to do this. I realize JS can do this.. but so can IBM Basic ;) I am savy with other db techniques like sql. My question is before I get too far along with this project, is it safe to say the current storage of Elog data is 'Flat File' database? I also want to find out if it would be better to try and grab the data prior OR after it gets into the Elog database. I see there are other forum messages related to sql interfacing and such, but nothing conclusive. I will submit my personal progress here. Thanks again, John |
|
Re: Calculations & Interfacing a DataBase with Elog., posted by Stefan Ritt on Sat Jun 22 10:07:08 2019
|
Yes elog stores data in a flat file database. Go to your logbook directory and look for files YYMMDDa.log where you find all data. Some people do a post submit call to scripts, other integrate JS directly on each page (e.g. via "bottom text" option where you can load a whole JavaScript file), then pick the fields and do calculations directly in the edit window.
Stefan
| John wrote: |
|
Hi, I am trying to calculate two or more Elog fields and then return the value to Elog. I am currently learning Perl to do this. I realize JS can do this.. but so can IBM Basic ;) I am savy with other db techniques like sql. My question is before I get too far along with this project, is it safe to say the current storage of Elog data is 'Flat File' database? I also want to find out if it would be better to try and grab the data prior OR after it gets into the Elog database. I see there are other forum messages related to sql interfacing and such, but nothing conclusive. I will submit my personal progress here. Thanks again, John
|
|
|
Re: Calculations & Interfacing a DataBase with Elog., posted by John on Sat Jun 22 10:21:39 2019
|
Thanks Stefan soo much. As I've said, I will update this post(s) as I make any progress :)
John
| Stefan Ritt wrote: |
|
Yes elog stores data in a flat file database. Go to your logbook directory and look for files YYMMDDa.log where you find all data. Some people do a post submit call to scripts, other integrate JS directly on each page (e.g. via "bottom text" option where you can load a whole JavaScript file), then pick the fields and do calculations directly in the edit window.
Stefan
| John wrote: |
|
Hi, I am trying to calculate two or more Elog fields and then return the value to Elog. I am currently learning Perl to do this. I realize JS can do this.. but so can IBM Basic ;) I am savy with other db techniques like sql. My question is before I get too far along with this project, is it safe to say the current storage of Elog data is 'Flat File' database? I also want to find out if it would be better to try and grab the data prior OR after it gets into the Elog database. I see there are other forum messages related to sql interfacing and such, but nothing conclusive. I will submit my personal progress here. Thanks again, John
|
|
|
text wrapping broken in firefox, posted by Devin Bougie on Thu Dec 19 16:28:06 2019
|
When creating new logbook entries, recent versions of firefox somehow ignore the message width setting.
For example, configure a logbook with:
Message Width = 76
Message Height = 20
Then, create a new plain text entry that contains very long lines. The text entry box is the correct size, but once you hit submit and view the full display of the message, it is not wrapped properly. The summary display is wrapped properly, but not the full display.
We've only found this to be a problem with recent versions of firefox. Chromium, Safari, and old versions of firefox behave properly. |
|
Re: text wrapping broken in firefox, posted by Devin Bougie on Thu Dec 19 16:40:10 2019
|
As an example, I created this same entry in the demo logbook using Safari. As you can see there, the message is wrapped at the width that I set the text entry box.
https://elog.psi.ch/elogs/Linux+Demo/9
> When creating new logbook entries, recent versions of firefox somehow ignore the message width setting.
>
> For example, configure a logbook with:
> Message Width = 76
> Message Height = 20
>
> Then, create a new plain text entry that contains very long lines. The text entry box is the correct size, but once you hit submit and view the full display of the message, it is not wrapped properly. The summary display is wrapped properly, but not the full display.
>
> We've only found this to be a problem with recent versions of firefox. Chromium, Safari, and old versions of firefox behave properly. |
|