Can Elog make a table?, posted by Walter Reviol on Wed Aug 7 22:54:03 2024
|
Hi!
I like to format an Elog "directory" such that all entries make/occur as a table. Say: 5 columns and a large number of rows. In a sense,
make an excel spreadsheet in Elog. Is this possible? How can this be done? Is there perhaps a template? |
Re: Can Elog make a table?, posted by Stefan Ritt on Thu Aug 8 09:07:45 2024
|
I'm not exactly sure what you want to do, but there are two options in elog:
1) Insert directly a table like this one:
Index
|
|
Elog on FreeBSD, posted by Truupe on Mon Aug 5 20:45:15 2024
|
Anyone using elog on FreeBSD nowadays? I know it used to be in the ports tree about 10 years ago but seems to be abandoned. Tried to compile
from source on 14.1, but no luck there. |
|
Re: Elog on FreeBSD, posted by Truupe on Mon Aug 5 21:15:08 2024
|
Welp, nevermind, I dug a little more and managed to compile it on 14.1 using cmake.
Truupe
wrote:
Anyone using elog on FreeBSD nowadays? I know it used to be in the |
Invalid Content-Length in header when running behind a load balancer, posted by Tamas Gal on Wed Jan 25 14:36:33 2023 
|
I am still struggling to get ELOG running behind a load balancer and hope to get some advice here. As already reported in https://elog.psi.ch/elogs/Forum/69542 I
observed an infinite loop of redirects when prompted to log in and using a non-empty password file. Without a password, the service worked as
expected. This was with version 3.1.3. |
|
Re: Invalid Content-Length in header when running behind a load balancer, posted by Tamas Gal on Wed Jan 25 19:51:29 2023
|
I put the ELOG service behind an Apache reverse proxy which is now sitting behind the HAProxy. It works like this, but it's just a workaround. I
am pretty sure that ELOG has problems to communicate with HAProxy correctly and it seems that Apache is more forgiving. So that the chain HAProxy ->
Apache -> ELOG and vice versa is working. |
|
Re: Invalid Content-Length in header when running behind a load balancer, posted by André on Mon Jul 22 16:30:04 2024
|
I have the same problem. I found a temporary solution: https://elog.psi.ch/elogs/Forum/69807
Tamas
Gal wrote:
I put the ELOG service behind an Apache reverse proxy which is now sitting |
|
Re: Invalid Content-Length in header when running behind a load balancer, posted by Stefan Ritt on Wed Jul 31 14:22:52 2024
|
I changed elog to interprete the content-length header case in-sensitive and committed the change. Can you try again?
Stefan
André |
HTTP headers should be parsed case insensitive, posted by André on Mon Jul 22 16:17:55 2024
|
I'm trying to run elog behind haproxy, but get the error "Invalid Content-Length in header" on posting.
As stated in the manual,
haproxy rewrites all headers to lower case. |
|
Re: HTTP headers should be parsed case insensitive, posted by Stefan Ritt on Wed Jul 31 14:21:21 2024
|
I changed elog to interprete the content-length header case in-sensitive and committed the change. Can you try again?
Stefan
André |
|
Old attachments erroneously appearing on new Elog entries., posted by Carl Unsworth on Fri Jul 26 12:53:23 2024
|
Hi, I'm not sure if this is an Elog bug, something wrong in my configuration/database.
When I create a new article on Elog it always shows an attachment from one of the first entries ever made to this log book made. This is in addition |
|
Re: Old attachments erroneously appearing on new Elog entries., posted by Stefan Ritt on Fri Jul 26 13:01:54 2024
|
| This bug has been fixed in meantime, please upgrade to the current version. |
|
Re: Old attachments erroneously appearing on new Elog entries., posted by Carl Unsworth on Fri Jul 26 13:14:38 2024
|
Thanks very much for the quick response Stefan. My apologies, I thought I was on the latest version or I would have upgraded before contacting you.
The file I installed from was the rpm "elog-3.1.5-20240226.el9.x86_64.rpm" which still seems to be the latest version on the Dropbox downloads
page. |
|
Re: Old attachments erroneously appearing on new Elog entries., posted by Stefan Ritt on Fri Jul 26 14:09:19 2024
|
| I updated the EL9 rpms, so please try again. |
|
Re: Old attachments erroneously appearing on new Elog entries., posted by Carl Unsworth on Fri Jul 26 14:33:50 2024
|
Great, thank you again. I have now installed the latest and the problem appears to be gone.
Stefan
Ritt wrote:
I updated the EL9 rpms, so please try again. |
|
Old attachments erroneously appearing on new Elog entries., posted by Carl Unsworth on Fri Jul 26 12:52:54 2024
|
Hi, I'm not sure if this is an Elog bug, something wrong in my configuration/database.
When I create a new article on Elog it always shows an attachment from one of the first entries ever made to this log book made. This is in addition |
|
Elog/ImageMagick under windows 11, posted by Aled Isaac on Thu Jul 18 11:38:01 2024
|
I was wondering if anyone would be able to assist me in getting the ImageMagick/figure scaling working on an elog running under windows 11 (Microsoft
Windows Version 22H2 (OS Build 22621.3880)). I've followed the installation instructions and checked that $PATH contains the directory
for both ImageMagick and GSS. In a 'command prompt' window, when I execute "identify -version" from any directory I get the response: |
|
Re: Elog/ImageMagick under windows 11, posted by Aled Isaac on Wed Jul 24 17:21:45 2024
|
I've managed to get it working and the problem wasn't what I thought it was. It turns out that ImageMagick v7 doesn't have a "convert.exe"
program in the windows version due to some conflict with a disk conversion utility. The "convert.exe" has been replaced with a "magick.exe"
and so I made a CONVERT.BAT script within the elog folder with content "magick %*". This workaround appears to have solved the problem. |
|
broken http response when deployed on OpenShift, posted by Enrico Gamberini on Wed Jul 10 17:43:07 2024
|
Hello!
We're setting up ELOG on OpenShift. ELOG is installed on a Alma Linux 9 image. The container and the elog demo works fine executing the docker
image locally. |
|
Re: broken http response when deployed on OpenShift, posted by Enrico Gamberini on Thu Jul 11 15:25:19 2024
|
Sorry for posting again but something else came up.
Actually, building from source (elog-3.1.5-1.tar.gz) works just fine on OpenShift
too. |
|
Re: broken http response when deployed on OpenShift, posted by Laurent Jean-Rigaud on Thu Jul 11 19:15:39 2024
|
Hey Enrico,
Do you activate also all options with your build ? (pam/ldap/kb5/ssl)
Can you compare ldd command results on elogd binaries builded by yourself and the one from RPM ? |
|
Re: broken http response when deployed on OpenShift, posted by Enrico Gamberini on Mon Jul 15 09:45:56 2024
|
Hi Laurent,
Thanks, good point! I'm building a vanilla version (no extra options enabled as I'm using Webserver authentication).
3.15 RPM: |
|
Re: broken http response when deployed on OpenShift, posted by Laurent Jean-Rigaud on Tue Jul 16 00:15:12 2024
|
Enrico,
When using RPM in OpenShift, I guess all the RPM dependencies are correctly installed.
FYI, I met a problem with elogd docker built with alpine Linux image and running on Synology NAS (x86_64). The ImageMagick dependencies libs |
|
Re: broken http response when deployed on OpenShift, posted by Laurent Jean-Rigaud on Tue Jul 16 00:45:08 2024
|
Also, you have the option to rebuild RPM from SRPMS or SOURCES via ELOG buildrpm script.
You will need to install rpmbuild tools...
Options (ldap, kb5, etc) can be set from options or by editing defaults. |