We have multiple logbooks. Each user is admin user for his/her own logbook. 

I want user be able to modify config file, but no access to user setting, such as see user list, change password, new user, remove user. 

[logbook1]
Admin user = user1
Login user = user1, user2
Allow Config = user1
List Menu commands = Admin, Config

user1 click on Admin, it opens config file, when user1 click on save, user1 is brought to Config page, which has select user list on top, Change password, Remove user, New user buttons on bottom. Is there a way that admin user has access to config file, but no access to user info at all (not even presented to them).  Is there a way after user1 click save, page doesn't go to that config page?

I could put 
Deny Change password =
Deny Remove user
Deny New user

so when user1 click on those buttons, user1 will get command not allowed. However I would rather have user1 not even see that page. 

> I upgraded my system, including the version of Firefox.
> [...]
> Sorry this is a bit rambling, but its very hard to describe!

A picture can say more than thousand words.
Can you reproduce this with a simple configuration?
If yes, can you attach the configuration, the *a.log files,
a description of what firefox version you're using and please:
some screenshots of "before" and "after"?

Thanks!
Andreas

 Hi Andreas, thank you for your reply. I have already found out that the problem on Mac was that I moved the cfg file to some other folder which did not contain the resources and scripts. I used the "-s" switch and now it works nicely. However, now I try to do the same thing on Windows and even the "-s" switch does not help (the default encodings etc. are set in the cfg file). I compiled the elog on Mac, but I used the installation package on Windows.

I upgraded my system, including the version of Firefox.

I normally view the topic in Threaded Collapsed mode, right click on the entry I want to reply to, to open a new
Tab.  However, I made a mistake an opened a new Window, as the two 'open' modes in Firefox swapped around.
But no worry, I thought, made my reply as usual.

However, when refreshing the topic afterwards, seemingly randomly distributed throughout the topic were
additional lines, with the latest entry showing up emboldened (but not as a clickable link), and the only
difference being the ID number which showed as 0 (zero).

Deleting the reply only caused the previous reply to show up randomly etc.

In effect, the latest entry is (randomly?) scattered throughout the topic - even in between entries older than
any in that thread, so it's not individial entries in that thread showing up.

The only way to get rid of it was to erase the whole directory, and re-install from backup (which, as it was the
first entry since the new installation, wasn't painful).  It's been fine since - but only so long as I open a
thread in a new tab, and not in a new Window.

I guess the real question is just what is added to some file - perhaps the .cfg file? - that using a separate
window causes this behavioir?  Any whay only as a new window, and given how elog is supposed to work on many
computers, why on this stand-alone computer running two sets of the same browser?

It happened once before at the end of last year during a regression backwards owing to the newer computer
failing and turning back to an older one with older OS and older firefox, where I did the same thing (in
reverse).  As I didn't investigate at that time, I still have the mystery line showing up in that topic.

Sorry this is a bit rambling, but its very hard to describe!

Hi All,

I found that elog crashes if I try to upload an image with long name. It actually uploads the file after the crash. It crashes also if in the full view with attachments visible. If I shorten the name all is fine.

The crash report screenshot is attached. It looks like a too small buffer (?).

 Hi All, 

 maybe I missed something in the configuration, but how do I get this nice editor for HTML like the one available on this forum?

Thanks a lot for advice.

 Hi,

I am experiencing repeated crashing of the elog daemon.

If I go into select mode while in threaded view, I can select an entire thread by selecting the top entry.

When I do so then press the Edit button, the server crashes.

I have to manually restart it. Syslog shows no error.

This does not happen under Summary or Full view.

Running Ubuntu 12.04, ELOG 2.9.2-2455

I can provide my elog.cfg if necessary.

Cheers!

Louis

P.S. i just crashed the forums ELOG following those same steps!! Sorry!! At least it was restarted in no time.