Like I said in the beginning, I'm a linux green-horn How do I stop the elogd daemon, and do I have to delete all the elog files and directories created by the RPM or can I just follow the instructions for the tar file and install / make over the RPM installation?

I'm slowly able to see the finish line

Now all I need to do is get SSL to work. My server name is hf-info-elog and I'm not sure what the correct values for Port= and URL= should be.

thank
Tom (the green-horn)

Firstly, as with some of the others recently, I am a complete newb when it comes to linux, Though I refuse to let that stop me and really want to get this working.

Pretty much I have a situation where I have been asked to install ELOG, though I am unable to use port 25 at all and also need to use GMAIL for the SMTP server?
It is also my undertanding from the documentation that ELOG only sends mail via port 25

So, I have setup iptables to forward everything from port 25 and a GMAIL IP address used in ELOG's global config for the SMTP, to a stunnel that redirects everything to GMAIL on port 465.
While getting that right took me almost two days, and that was with tons of help and more than half of it being spoon fed to me (though I have learnt SO SO MUCH from just that).
I am still unable to get ELOG to send emails, even if does now seem to connect

Below is a copy of the log from last night (I have spent most of the day trying to sort it out further, but I get the same error)

So I guess my question is, Is it possible to use GMAIL, with ELOG, based on my current conditions, and does anyone have any idea what I can do to go on from here, as I doubt I am the first one to head down this road?
 

--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

10-Apr-2012 21:45:19 [Chris@1.2.3.4] {logbookA} Email from <chris@server.com> to chris@server.com, SMTP host 173.194.67.108:
10-Apr-2012 21:45:20 [Chris@1.2.3.4] {logbookA} 220 mx.google.com ESMTP XXXXXXXX.XX^M
10-Apr-2012 21:45:20 [Chris@1.2.3.4] {logbookA}
10-Apr-2012 21:45:20 [Chris@1.2.3.4] {logbookA} EHLO SERVER.COM^M
10-Apr-2012 21:45:20 [Chris@1.2.3.4] {logbookA} 250-mx.google.com at your service, [152.106.18.2]^M
10-Apr-2012 21:45:20 [Chris@1.2.3.4] {logbookA} 250-SIZE 35882577^M
10-Apr-2012 21:45:20 [Chris@1.2.3.4] {logbookA} 250-8BITMIME^M
10-Apr-2012 21:45:20 [Chris@1.2.3.4] {logbookA} 250-AUTH LOGIN PLAIN XOAUTH^M
10-Apr-2012 21:45:20 [Chris@1.2.3.4] {logbookA} 250 ENHANCEDSTATUSCODES^M
10-Apr-2012 21:45:20 [Chris@1.2.3.4] {logbookA} AUTH LOGIN^M
10-Apr-2012 21:45:21 [Chris@1.2.3.4] {logbookA} Username:
10-Apr-2012 21:45:21 [Chris@1.2.3.4] {logbookA} username@gmail.com
10-Apr-2012 21:45:21 [Chris@1.2.3.4] {logbookA} Password:
10-Apr-2012 21:45:21 [Chris@1.2.3.4] {logbookA} MYXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
10-Apr-2012 21:45:21 [Chris@1.2.3.4] {logbookA} 501 5.5.2 Cannot Decode response fl2sm792152wib.2

--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------


Right now I am pretty stuck, and any advice would be greatly appreciated on how to move forward.

Thanks in Advance
 

We seem to have a problem with retrieving user passwords using the forgot password system 

 Thanks mate.. Glad to know it wasn't just me going insane? I'll keep an eye out for the new file

Hi,

the manual says:

"
There are four ways through which access to a logbook may be controlled:

it may be open for all to read ;
it may require a common "read" password for all users ;
it may require each user to have an individual user account (login name) and password ;
finally, access may be granted or not depending on the address of the workstation you are using.
"

But it doesn't say how to do so or at least I didn't find it.

If I have each user have to log in with an individual accout, can I define which logbooks he can read and/or modify?
If yes, how to do that?

Also, please accept my vote for user groups. We can use that, too.

TIA,
Roland.

 Yoshio,

Thanks for the suggestion.

We have actually tried running the elog server with a very minimal set of attributes, all of which were human entries, and still had response times that were entirely unacceptable.  So, unfortunately this path won't solve all our issues.

tt