Hello Elog forum

Is it possible to email boolean statements, like if a checkbox is checked to email certain people?

My Configuration looks like this but dosn't work:

Attributes = Bruger, Station, Emne, Status, PM5
Options PM5 = boolean
Email PM5 = fj@tvis.net

Kind Regards

Finn

> Hello Elog forum
> 
> Is it possible to email boolean statements, like if a checkbox is checked to email certain people?
> 
> My Configuration looks like this but dosn't work:
> 
> Attributes = Bruger, Station, Emne, Status, PM5
> Options PM5 = boolean
> Email PM5 = fj@tvis.net
> 
> Kind Regards
> 
> Finn

I still don't have a solution to the above, but this works:

Attributes = Bruger, Station, Emne, Status, PM5
ROptions PM5 = Ja
Email PM5 Ja = th@tvis.net, fj@tvis.net

Kind Regards

Finn

> > Hello Elog forum
> > 
> > Is it possible to email boolean statements, like if a checkbox is checked to email certain people?
> > 
> > My Configuration looks like this but dosn't work:
> > 
> > Attributes = Bruger, Station, Emne, Status, PM5
> > Options PM5 = boolean
> > Email PM5 = fj@tvis.net
> > 
> > Kind Regards
> > 
> > Finn
> 
> I still don't have a solution to the above, but this works:
> 
> Attributes = Bruger, Station, Emne, Status, PM5
> ROptions PM5 = Ja
> Email PM5 Ja = th@tvis.net, fj@tvis.net
> 
> Kind Regards
> 
> Finn

You were so close: boolean has the two values "0" (unchecked) and "1" (checked).

 Attributes = Bruger, Station, Emne, Status, PM5
 Options PM5 = boolean
 Email PM5 1 = fj@tvis.net

That does work, I've tested it.

> > > Hello Elog forum
> > > 
> > > Is it possible to email boolean statements, like if a checkbox is checked to email certain people?
> > > 
> > > My Configuration looks like this but dosn't work:
> > > 
> > > Attributes = Bruger, Station, Emne, Status, PM5
> > > Options PM5 = boolean
> > > Email PM5 = fj@tvis.net
> > > 
> > > Kind Regards
> > > 
> > > Finn
> > 
> > I still don't have a solution to the above, but this works:
> > 
> > Attributes = Bruger, Station, Emne, Status, PM5
> > ROptions PM5 = Ja
> > Email PM5 Ja = th@tvis.net, fj@tvis.net
> > 
> > Kind Regards
> > 
> > Finn
> 
> You were so close: boolean has the two values "0" (unchecked) and "1" (checked).
> 
>  Attributes = Bruger, Station, Emne, Status, PM5
>  Options PM5 = boolean
>  Email PM5 1 = fj@tvis.net
> 
> That does work, I've tested it.

Of course :-)

Thank you Andreas

Kind Regards Finn

Hi Team,

Can you please guide me how to export and import the documents from the one elog to the another elog server also I like to know how to backup the server.

Thanks

Stan

See https://elog.psi.ch/elog/config.html#mirroring

and

https://elog.psi.ch/elog/userguide.html#access

(use "find" with "Export to" "Raw".)

Hi all,

When I tried to set SMTP server of Gmail in the global configuration file, I get the message "Error sending Email via <i>"smtp.gmail.com"</i>: Cannot connect to server" after I tried to receive the Email notification. Is there anyone gives help to solve this issue?

Thanks!

Kevin

Gmail uses a type of SMTP authentication which is currently not supported by elog. It's however on the todo list.

Stefan

Hi Stefan,

Thank you very much for your reply. So which SMTP type can I use now? Is outlook OK?

Kevin

This is a local issue  on your network, if you have a mail server setup. SMTP is not handled directly by Elog and neither is any other mail protocal. Elog just sends the requested email to your server for processing to the recipients afaict. And whatever server (or service) you use to handle email sending needs to be able to accept them from your mail server. So after verifying which ones  you want to use; (like OutLook, or gmail, or whatever), then have your local email server set up to work with them. You can prol have a 3rd party do this was well (instead of your own local one) but then they would STILL need to be able to work with whatever guidlines the actual sender (gmail, hotmail..) requires to have mail sent. Email is a lonnng trail of different providers, servers, and other actors..

Halvy

Hi everyone.

We are new in ELOG. We have installed it and created new logbooks following the "demo" one. We have configured our SMTP host, with email and pass, but we obtain this error when submit

Error sending Email via <i>"mdm.correo.gob.es"</i>: 5.7.8 Error: authentication failed: another step is needed in authentication

Do you know why and give us some tips for solution?

Our bests,

Informática AEMET Valencia

If you post the [global] part of your configuration, it would help a little bit to understand the problem.

Cheers, Andreas

I try with gmail account and neither it works.

I'm using Windows 10 and it runs into a proxy defined as URL

[global]
port = 80
SMTP host = mdm.correo.gob.es
SMTP username = XXXX@aemet.es
SMTP password = XXXXXX
SMTP port = 25
URL = http://proxy.aemet.es:3128/

Thanks
 

Elog supports only a limited set of authentications for SMTP. Both GMail and probably also your server requires more advanced authentication schemes, which are not suppoerted by elog. Sorry.

Stefan

Me podrías decir algún servidor SMTP de correo desde el que si funcione?

Muchas gracias

Sorry,

Could you please tell us a MAIL SMTP SERVER we can use to try?

Many thanks

Sorry, but I would think that this is a question for the IT department of your institute, not for the ELOG forum.

Since you have an institute email address (infoval@aemet.es NOT xxx@gmail.com), you certainly have your own mail server, or am I wrong?

Cheers, Andreas

Hello,

I can paste images into text (which resulted in the text_size too long error message), however, I can't drop them on my elog. However, I can do it on the demo version. Was the drag and drop into text already supported in version 3.1.3 and I am just missing some configuration option, or do I need to find a repository with a more recent version of elog?

Thanks!

The Drag & Drop was implemented already in 3.0.0 (see https://elog.psi.ch/elog/download/ChangeLog). So no idea why it's not working for you.

Stefan

Can I find the config of the demo elog somewhere, so I could try it locally?

It's the config from the distribution. A copy is below.

Stefan

[global]
port = 8080

[demo]
Theme = default
Comment = General Linux Tips & Tricks
Attributes = Author, Type, Category, Subject, Pinned
Options Pinned = boolean
Options Type = Routine, Software Installation, Problem Fixed, Configuration, Other
Options Category = General, Hardware, Software, Network, Other
Extendable Options = Category
Required Attributes = Author, Type
Page Title = ELOG - $subject
Reverse sort = 1
Quick filter = Date, Type
Last default = 31

Thank you. Locally doesn't work for some reason... I'll try to investigate.

Btw. do you plan to properly accept pasting of images? Pasting a screenshot saves a lot of time when making logs.

> Btw. do you plan to properly accept pasting of images?

I would claim it is already properly supported. If you hit a size limit you can configure your ELOG to adjust the limit (Max content length).

Or did I misunderstand your question?

From what I've read in a past post, it is hitting the max content length because pasting, unlike dropping, is not properly supported and it is possible that images get converted to text in some way and occupy a lot of "content length". So what I mean is that the pasted image is handled the same way as the dropped image.

Btw. adjusting the Max content length, according to the message, requires recompilation of the program, so it is not only a matter of configuration.

I've discovered, that if I switch my local elog to SSL, dropping of images starts to work (as expected). However... pasting stops. If I select "paste" popup, I got the message about my browser security settings not allowing to paste, and that I can paste in the popup window. In Firefox I can actually paste in the popup window (image appears there), but after clicking OK nothing appears in the editing window. In Chrome and Opera nothing appears even in the popup window. I played with FF security settings, enabling pasting for elog sites (both local and the demo on this site) as advised in many places on the internet, but it doesn't help. This may be a CKInter issue, although interesting that it works without SSL (and not properly, resulting in too big text being stored)

Dear all, 

we have a running elog installation using SSL (with the self-signed certificate). Generally we use the web interface, but we have been asked if it was possible to automatically insert elog entries via command line. 

elog.exe should be the answer and so I gave it a try.

I was trying the following command line: 

elog.exe. -h server-ip-address -p 8080 -l demo -s -v -u username password -a "Mass=0" This is a test entry

Of course server-ip-address and username / password were proper fields. 

When I was doing this from the server itself, I got the following message:

Successfully connected to host server-ip-address, port 8080
Possibly invalid certificate, continue on your own risk!

and then the entry was inserted, but when I was typing the same from any other PC I got the error message:

Successfully connected to host server-ip-address, port 8080
elogd server does not run SSL protocol

The entry is of course not added and also the server (that is running in very verbose mode) reported a

SSL_accept failed

How can I fix it?  

Thanks for helping,

Antonio

Any news for my problem? 

Your help is very much appreaciated! 

thanks :)

I am using SSL with ELOG and it works fine with the "elog" executable. I am no expert on SSL, but I can provide my two cent what you could try, maybe it helps:

• SSL desires to run on the port 443 - I have no idea if you can force it to run on an arbitrary port, it might be possible. But does it make sense?
• Certificates are checked against the provider of the certificate. I guess this works fine from your web browser? Or did you just add a security exception?
• Has the installed "elog.exe" been compiled with SSL support on?

Dear Andreas,

thanks for your message.

Here are the answers to your questions.

• Tomorrow I will try to restart the server on port 443, at least temporary, to see if it makes any difference
• We don't have a real certificate, but just the self-signed certificate that comes with the standard distribution of elog. Of course, I have to accept an exception when connecting from the browser. When I try to add an entry to via the command line from the server itself, I get the message Possibly invalid certificate, continue on your own risk! but it works. 
• I hope so. This is the elog.exe that comes with the standard distribution, so I have to presume so. It is the same version that is installed on the server, where it works.

Thanks again and more tomorrow...

So as promised, I add some more information. 

Unfortunately changing the port where the server is listening did not make any change. The situation is still the same. If I try directly from the server, I get a warning about the fake certificate and if I do it from elsewhere, I get the error that the server is not running SSL. 

I had a look at the source code of elog.c and found the point where the error is produced. in order to produce this message, the ssl_connect should be returning -1 and this is only possible in two cases: 

So, in the first case, it means that the SSL connection failed completly. In the second case, the peer certificate is invalid. 

Is it possible to discriminate between the two, for example changing the return value? Unfortunately I don't have a windows computer with development tools. So it would be great if you could prepare an executable for me with this small change. 

Thanks in advance for your help,

cheers,

Hello,
I have experienced some inconveniences with the restrict edit time option.

First, it is not possible for admin users to edit an entry after the edit time.
The restrict edit option allows admin users to edit posts from other users,
so I think admins should also be allowed to edit posts after edit time.
As they can edit the config and temporarily disable the restrict edit time option, which is an issue.

Secondly, if a user made a draft and did not submitted it before the edit time runs out,
the draft got stuck as it cannot be edited (and submitted) any more.

Best wishes,
Sebastian

Yes, I agree that cleaning up old Draft entries and correcting/deleting old entries is a job for the administrator. Currently I do what you've said: commenting out "restrict edit time", changing the entry, commenting in "restrict edit time".

There are already some commands specifically for the admin:

• Admin textarea = <cols>,<rows>
• Admin user = <user list>

It would make sense to add more of them, for this specific case:

• Admin restrict edit time = <hours>

If that is set to "-1", then the Admin can edit old entries regardless of their age. Actually there is no option to "unset" restrict edit time inherited from a global config: a negative time would make sense as "disabling" restrict edit time.

Another item for the endless wishlist ;-)

Cheers, Andreas

Hello,

Is it possible to create tags for new entries in elog? I understand it would have to be some kind of mix between Extendable options and moptions. Currently, whatever is entered in extendable options forms one option, while usually for tags, words separated by # form different tags. As usual with tags, I would like to add multiple tags to my new entry and then be able to filter all entries by specific tag or group of tags.

While tags are not explicitly foreseen, you can use moptions and filter with them. Look at this logbook for example: Click on "Find", then select one or more boxes of the "OS" attribute, and you will see the filtering. Another option is to use freetext in the subject for example. I added "#testtag" in this subject, so you can search for the text "#testtag" and will find this entry.

Stefan