Re: log entries after a certain date not displayed - 3.1.1, posted by Stefan Ritt on Wed Nov 25 08:51:46 2015
|
Drafts are not shown in the list page, but you can browse directly to them, if you know their idea. They are also shown if you hit "new". Then
a box comes up "You have unfished drafts, do you want to edit them?". This is the new draft feature introduced recently and a feature of elog.
But I guess you have a more general problem. You run two elogd severs, and you transfer information between the two servers via Dropbox. Elog |
|
Re: log entries after a certain date not displayed - 3.1.1, posted by Mike Giles on Wed Nov 25 09:26:39 2015
|
Stefan
Ritt wrote:
Drafts are not shown in the list page, but you can browse directly to |
|
Re: log entries after a certain date not displayed - 3.1.1, posted by Mike Giles on Wed Nov 25 09:27:07 2015
|
Understood, Thanks very much for your help.
Stefan
Ritt wrote:
Drafts are not shown in the list page, but you can browse directly to |
|
Re: How to configure SMTP server in Windows using gmail, posted by Dawang on Fri Nov 27 06:31:25 2015
|
Hi Stefan,
I remeber when I used elog email notif feature in my previous workplace which is running in windows, I just put IP address on SMTP host = X.X.X.X
at the config file and it run without any problem. I'm thinking they are using SMTP server. Can you please recommend any SMTP server and SMTP relayer |
|
Re: Sample of actual elog Config with URL in SSL, posted by Andreas Luedeke on Wed Dec 16 09:56:09 2015
|
You normally don't need to specify "URL = xxx" at all. It is only needed if you work with a Proxy that changes the normal ELOG URL. And
yes, you'll need "Port = 433" and "SSL =1".
And elogd must be compiled with USE_SSL=1, maybe that's your problem? |
|
Re: Prefill attributes for new post, posted by Stefan Ritt on Tue Jan 12 11:50:22 2016
|
Put a "p" in front of the attribute, like "&pSubsystem=Vacuum". This is kind of an undocumented feature just for the experts
;-)
Johan |
|
Re: Prefill attributes for new post, posted by Johan Forsberg on Tue Jan 12 14:05:55 2016
|
Wow, than you both for the quick response! I agree it's quite a hidden gem, but the most important thing is that it works, thanks!
Stefan
Ritt wrote:
Put a "p" in front of the attribute, like "&pSubsystem=Vacuum". |
|
Re: Monitoring a logbook for changes, posted by Stefan Ritt on Tue Jan 12 16:10:34 2016
|
Use automatic email notifications or RSS feeds. Read the manual for that.
Stefan
Johan |