Andreas Luedeke wrote:

Norm wrote: I attempted to install the newest version of elog on our site elog server from an old old version.  Around 2008 I believe.  I then received an application failed to initialize properly 0xc0150002 after installing the newest version.  I then tried installing the Feb 2013 version and received the same message.  Panicked, I rolled back our server to its state yesterday.  I would like to update our elog software, anyone know why I am receiving this error??  Hi Norm. I have not much experience with windows, but I can give you my two cent on how to proceed: Check the old elogd version. It is shown at the bottom of your elog web page (this forum shows ELOG V2.9.2-2475). Copy your logbook data to a different PC, maybe your office PC. Then compile the latest elog on your office PC, run it with the copied data and access it as http://localhost:8080 (or whatever port number you are using) If it is still crashing: re-compile it using "make debug" and run it from a debugger (I don't know any C-debugger for Windows). Post the precise error message.   Afrikaans Albanian Arabic Armenian Azerbaijani Basque Belarusian Bulgarian Catalan Chinese (Simplified) Chinese (Traditional) Croatian Czech Danish Detect language Dutch English Estonian Filipino Finnish French Galician Georgian German Greek Haitian Creole Hebrew Hindi Hungarian Icelandic Indonesian Irish Italian Japanese Korean Latin Latvian Lithuanian Macedonian Malay Maltese Norwegian Persian Polish Portuguese Romanian Russian Serbian Slovak Slovenian Spanish Swahili Swedish Thai Turkish Ukrainian Urdu Vietnamese Welsh Yiddish ⇄ Afrikaans Albanian Arabic Armenian Azerbaijani Basque Belarusian Bulgarian Catalan Chinese (Simplified) Chinese (Traditional) Croatian Czech Danish Dutch English Estonian Filipino Finnish French Galician Georgian German Greek Haitian Creole Hebrew Hindi Hungarian Icelandic Indonesian Irish Italian Japanese Korean Latin Latvian Lithuanian Macedonian Malay Maltese Norwegian Persian Polish Portuguese Romanian Russian Serbian Slovak Slovenian Spanish Swahili Swedish Thai Turkish Ukrainian Urdu Vietnamese Welsh Yiddish Detect language » English   Good luck!

 Andreas,

We do not have the current revision at the bottom of any of the pages.  Is there another way I can find out the current revision I'm using?

Thanks!

Hello all,

I am installing elog on an Rocky Linux instance. Have dependensy problem. 

rpm -Uvh elog-latest.el7.x86_64.rpm 

error: Failed dependencies:

    liblber-2.4.so.2()(64bit) is needed by elog-3.1.5-1.el7.x86_64

    libldap-2.4.so.2()(64bit) is needed by elog-3.1.5-1.el7.x86_64

    libssl.so.10()(64bit) is needed by elog-3.1.5-1.el7.x86_64

    libssl.so.10(libssl.so.10)(64bit) is needed by elog-3.1.5-1.el7.x86_64

Any clues from developers to resolve it and keep the software working. Thank you in advance!

Bests, Nina

How can I exclude the access of a number of users in one (out of two) logbooks running in the same server and URL?

Is it possible to generate a table of contents based on h1/h2/h3 HTML tags?

Example:

toc()

< h1>test
< h2>test1
< h1>test2
< h2>test3
< h1>test4
< h2>test5

Results in:

1. test
1.1 test1
2. test2
2.1 test3
3. test4
3.1 test5

...the text...

Hi, 
my elogd crashes sometimes when I click on the "Change config" button. What info should I collect more than below/attached?

In windows EventViewer I see this printouts:

###
- <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
- <System>
  <Provider Name="Windows Error Reporting" /> 
  <EventID Qualifiers="0">1001</EventID> 
  <Level>4</Level> 
  <Task>0</Task> 
  <Keywords>0x80000000000000</Keywords> 
  <TimeCreated SystemTime="2017-06-20T12:25:30.000000000Z" /> 
  <EventRecordID>28059</EventRecordID> 
  <Channel>Application</Channel> 
  <Computer>NIKLAS</Computer> 
  <Security /> 
  </System>
- <EventData>
  <Data>108889037262</Data> 
  <Data>1</Data> 
  <Data>APPCRASH</Data> 
  <Data>Not available</Data> 
  <Data>0</Data> 
  <Data>elogd.exe</Data> 
  <Data>0.0.0.0</Data> 
  <Data>58f9c864</Data> 
  <Data>elogd.exe</Data> 
  <Data>0.0.0.0</Data> 
  <Data>58f9c864</Data> 
  <Data>c0000005</Data> 
  <Data>00064eea</Data> 
  <Data /> 
  <Data /> 
  <Data>C:\Users\hognik\AppData\Local\Temp\WER9155.tmp.WERInternalMetadata.xml</Data> 
 
<Data>C:\ProgramData\Microsoft\Windows\WER\ReportArchive\AppCrash_elogd.exe_9ef84f861b91d5afaf68864978184ca611e7a22a_d4f2c951_08bd38b0</Data>

  <Data /> 
  <Data>0</Data> 
  <Data>7232f1e4-55b3-11e7-826a-e4b3181bd6c1</Data> 
  <Data>0</Data> 
  <Data>94c2d6a18797708666faf33a7273855a</Data> 
  </EventData>
  </Event>
###

- <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
- <System>
  <Provider Name="Application Error" /> 
  <EventID Qualifiers="0">1000</EventID> 
  <Level>2</Level> 
  <Task>100</Task> 
  <Keywords>0x80000000000000</Keywords> 
  <TimeCreated SystemTime="2017-06-20T12:24:47.000000000Z" /> 
  <EventRecordID>28058</EventRecordID> 
  <Channel>Application</Channel> 
  <Computer>NIKLAS</Computer> 
  <Security /> 
  </System>
- <EventData>
  <Data>elogd.exe</Data> 
  <Data>0.0.0.0</Data> 
  <Data>58f9c864</Data> 
  <Data>elogd.exe</Data> 
  <Data>0.0.0.0</Data> 
  <Data>58f9c864</Data> 
  <Data>c0000005</Data> 
  <Data>00064eea</Data> 
  <Data>1568</Data> 
  <Data>01d2e9c028b88983</Data> 
  <Data>C:\Program Files (x86)\ELOG\elogd.exe</Data> 
  <Data>C:\Program Files (x86)\ELOG\elogd.exe</Data> 
  <Data>7232f1e4-55b3-11e7-826a-e4b3181bd6c1</Data> 
  <Data /> 
  <Data /> 
  </EventData>
  </Event>

###

- <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
- <System>
  <Provider Name="Windows Error Reporting" /> 
  <EventID Qualifiers="0">1001</EventID> 
  <Level>4</Level> 
  <Task>0</Task> 
  <Keywords>0x80000000000000</Keywords> 
  <TimeCreated SystemTime="2017-06-20T12:24:07.000000000Z" /> 
  <EventRecordID>28057</EventRecordID> 
  <Channel>Application</Channel> 
  <Computer>NIKLAS</Computer> 
  <Security /> 
  </System>
- <EventData>
  <Data>108889037262</Data> 
  <Data>1</Data> 
  <Data>APPCRASH</Data> 
  <Data>Not available</Data> 
  <Data>0</Data> 
  <Data>elogd.exe</Data> 
  <Data>0.0.0.0</Data> 
  <Data>58f9c864</Data> 
  <Data>elogd.exe</Data> 
  <Data>0.0.0.0</Data> 
  <Data>58f9c864</Data> 
  <Data>c0000005</Data> 
  <Data>00064eea</Data> 
  <Data /> 
  <Data /> 
  <Data>C:\Users\hognik\AppData\Local\Temp\WERBE94.tmp.WERInternalMetadata.xml
C:\Users\hognik\AppData\Local\Temp\WERCA4D.tmp.appcompat.txt triagedump.dmp
C:\Users\hognik\AppData\Local\Temp\WERCB77.tmp.WERDataCollectionFailure.txt</Data> 
 
<Data>C:\ProgramData\Microsoft\Windows\WER\ReportArchive\AppCrash_elogd.exe_9ef84f861b91d5afaf68864978184ca611e7a22a_d4f2c951_0a4ff4e6</Data>

  <Data /> 
  <Data>0</Data> 
  <Data>5206c994-55b3-11e7-826a-e4b3181bd6c1</Data> 
  <Data>4104</Data> 
  <Data>94c2d6a18797708666faf33a7273855a</Data> 
  </EventData>
  </Event>

###

- <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
- <System>
  <Provider Name="Application Error" /> 
  <EventID Qualifiers="0">1000</EventID> 
  <Level>2</Level> 
  <Task>100</Task> 
  <Keywords>0x80000000000000</Keywords> 
  <TimeCreated SystemTime="2017-06-20T12:23:53.000000000Z" /> 
  <EventRecordID>28056</EventRecordID> 
  <Channel>Application</Channel> 
  <Computer>NIKLAS</Computer> 
  <Security /> 
  </System>
- <EventData>
  <Data>elogd.exe</Data> 
  <Data>0.0.0.0</Data> 
  <Data>58f9c864</Data> 
  <Data>elogd.exe</Data> 
  <Data>0.0.0.0</Data> 
  <Data>58f9c864</Data> 
  <Data>c0000005</Data> 
  <Data>00064eea</Data> 
  <Data>2338</Data> 
  <Data>01d2e9baf6174f0f</Data> 
  <Data>C:\Program Files (x86)\ELOG\elogd.exe</Data> 
  <Data>C:\Program Files (x86)\ELOG\elogd.exe</Data> 
  <Data>5206c994-55b3-11e7-826a-e4b3181bd6c1</Data> 
  <Data /> 
  <Data /> 
  </EventData>
  </Event>
###

Hi,

my ELOG sometimes dies with "deadc0de", do I have too large ELOG config or logbook? Or is it simply a bug?

What can I do to solve this problem? "ulimit"? Or some trace output from elog?

BR, Niklas

I can produce the problem, but it is related to the information in the logbook which I cannot share...

Configuration:

[global]
port = 8000
Main Tab = Home
Password file = elogpasswd.txt
Admin user = eniklas
Self register = 0
Welcome Title = <h3>ENIKLAS ELOG<h3>
Relative redirection = 1
Entries per page = 1000
Display mode = summary
Suppress Email to users = 1
Summary lines = 0



[General]
Theme = default
Attributes = Type, Subject
Options Type = Configuration, Information, Documents
Extendable Options = Type
Required Attributes = Type
Page Title = ELOG - $subject
Reverse sort = 0
Quick filter = Date, Type


[Testing]
Theme = default
Attributes = Type, Subject
Options Type = Configuration, Information, Documents
Extendable Options = Type
Required Attributes = Type
Page Title = ELOG - $subject
Reverse sort = 0
Quick filter = Date, Type

I know nothing about gdb. Here are my stumbling attempts of using it, please tell me how to use gdb:

niklas@bba:~$ gdb -d /home/eniklas/Project/Niho/elog/bin/elog-2.7.5 --args  /home/eniklas/Project/Niho/elog/bin/installation/usr/local/sbin/elogd  -c /home/eniklas/Project/Niho/elog/bin/installation/usr/local/elog/elogd.cfg
GNU gdb 6.6-debian
Copyright (C) 2006 Free Software Foundation, Inc.
GDB is free software, covered by the GNU General Public License, and you are
welcome to change it and/or distribute copies of it under certain conditions.
Type "show copying" to see the conditions.
There is absolutely no warranty for GDB.  Type "show warranty" for details.
This GDB was configured as "i486-linux-gnu"...
Using host libthread_db library "/lib/tls/i686/cmov/libthread_db.so.1".
(gdb) run
Starting program: /home/eniklas/Project/Niho/elog/bin/installation/usr/local/sbin/elogd -c /home/eniklas/Project/Niho/elog/bin/installation/usr/local/elog/elogd.cfg
elogd 2.7.5 built Oct 22 2008, 13:37:35 revision 2130
FCKedit detected
Indexing logbooks ... done
Server listening on port 8000 ...
elogd: src/elogd.c:714: xfree: Assertion `*((unsigned int *) (temp + old_size)) == 0xdeadc0de' failed.

Program received signal SIGABRT, Aborted.
0xffffe410 in __kernel_vsyscall ()
(gdb) bt
#0  0xffffe410 in __kernel_vsyscall ()
#1  0xb7e3e875 in raise () from /lib/tls/i686/cmov/libc.so.6
#2  0xb7e40201 in abort () from /lib/tls/i686/cmov/libc.so.6
#3  0xb7e37b6e in __assert_fail () from /lib/tls/i686/cmov/libc.so.6
#4  0x0804b0b6 in xfree (pointer=0x9176298) at src/elogd.c:714
#5  0x08058903 in el_submit (lbs=0x90f8090, message_id=5, bedit=1, date=0xbfbe054c "<keep>", attr_name=0x824e1e0,
    attr_value=0xbfbb2db8, n_attr=2,
    text=0x8211140 "<table height=\"694\" cellspacing=\"0\" cellpadding=\"0\" border=\"0\" width=\"674\" style=\"margin-left: 72pt; border-collapse: collapse;\" class=\"MsoNormalTable\">\r\n    <tbody>\r\n        <tr style=\"\">\r\n          "...,
    in_reply_to=0xbfbe04ac "<keep>", reply_to=0xbfbdf678 "<keep>", encoding=0xbfbe04fc "HTML", afilename=0xbfbd77a8,
    mark_original=1, locked_by=0x0) at src/elogd.c:4819
#6  0x0809f721 in submit_elog (lbs=0x90f8090) at src/elogd.c:21934
#7  0x080b04e9 in interprete (lbook=0x90f8090 "Testing", path=0x80cdc60 "") at src/elogd.c:25816
#8  0x080b2a53 in decode_post (logbook=0xbfc0a1a0 "Testing", lbs=0x90f8090, string=0x9166614 "",
    boundary=0xbfc0a3a0 '-' <repeats 27 times>, "196291262324084", length=134670) at src/elogd.c:26382
#9  0x080b54fa in process_http_request (
    request=0x9145548 "POST /Testing/ HTTP/1.1\r\nHost: bba.eld.ki.sw.home.se:8000\r\nUser-Agent: Mozilla/5.0 (Windows; U; Windows NT 6.0; en-US; rv:1.9.0.4) Gecko/2008102920 Firefox/3.0.4\r\nAccept: text/html,application/xht"..., i_conn=0)
    at src/elogd.c:26936
#10 0x080b7f0f in server_loop () at src/elogd.c:27746
#11 0x080ba36b in main (argc=3, argv=0xbfc0b924) at src/elogd.c:28797
(gdb) bt 100
#0  0xffffe410 in __kernel_vsyscall ()
#1  0xb7e3e875 in raise () from /lib/tls/i686/cmov/libc.so.6
#2  0xb7e40201 in abort () from /lib/tls/i686/cmov/libc.so.6
#3  0xb7e37b6e in __assert_fail () from /lib/tls/i686/cmov/libc.so.6
#4  0x0804b0b6 in xfree (pointer=0x9176298) at src/elogd.c:714
#5  0x08058903 in el_submit (lbs=0x90f8090, message_id=5, bedit=1, date=0xbfbe054c "<keep>", attr_name=0x824e1e0,
    attr_value=0xbfbb2db8, n_attr=2,
    text=0x8211140 "<table height=\"694\" cellspacing=\"0\" cellpadding=\"0\" border=\"0\" width=\"674\" style=\"margin-left: 72pt; border-collapse: collapse;\" class=\"MsoNormalTable\">\r\n    <tbody>\r\n        <tr style=\"\">\r\n          "...,
    in_reply_to=0xbfbe04ac "<keep>", reply_to=0xbfbdf678 "<keep>", encoding=0xbfbe04fc "HTML", afilename=0xbfbd77a8,
    mark_original=1, locked_by=0x0) at src/elogd.c:4819
#6  0x0809f721 in submit_elog (lbs=0x90f8090) at src/elogd.c:21934
#7  0x080b04e9 in interprete (lbook=0x90f8090 "Testing", path=0x80cdc60 "") at src/elogd.c:25816
#8  0x080b2a53 in decode_post (logbook=0xbfc0a1a0 "Testing", lbs=0x90f8090, string=0x9166614 "",
    boundary=0xbfc0a3a0 '-' <repeats 27 times>, "196291262324084", length=134670) at src/elogd.c:26382
#9  0x080b54fa in process_http_request (
    request=0x9145548 "POST /Testing/ HTTP/1.1\r\nHost: bba.eld.ki.sw.home.se:8000\r\nUser-Agent: Mozilla/5.0 (Windows; U; Windows NT 6.0; en-US; rv:1.9.0.4) Gecko/2008102920 Firefox/3.0.4\r\nAccept: text/html,application/xht"..., i_conn=0)
    at src/elogd.c:26936
#10 0x080b7f0f in server_loop () at src/elogd.c:27746
#11 0x080ba36b in main (argc=3, argv=0xbfc0b924) at src/elogd.c:28797
(gdb) f 4
#4  0x0804b0b6 in xfree (pointer=0x9176298) at src/elogd.c:714
714        assert(*((unsigned int *) (temp + old_size)) == 0xdeadc0de);
(gdb) info 4
Undefined info command: "4".  Try "help info".
(gdb) up
#5  0x08058903 in el_submit (lbs=0x90f8090, message_id=5, bedit=1, date=0xbfbe054c "<keep>", attr_name=0x824e1e0,
    attr_value=0xbfbb2db8, n_attr=2,
    text=0x8211140 "<table height=\"694\" cellspacing=\"0\" cellpadding=\"0\" border=\"0\" width=\"674\" style=\"margin-left: 72pt; border-collapse: collapse;\" class=\"MsoNormalTable\">\r\n    <tbody>\r\n        <tr style=\"\">\r\n          "...,
    in_reply_to=0xbfbe04ac "<keep>", reply_to=0xbfbdf678 "<keep>", encoding=0xbfbe04fc "HTML", afilename=0xbfbd77a8,
    mark_original=1, locked_by=0x0) at src/elogd.c:4819
4819       xfree(message);
(gdb) info 4
Undefined info command: "4".  Try "help info".
(gdb) info f
Stack level 5, frame at 0xbfb623c0:
 eip = 0x8058903 in el_submit (src/elogd.c:4819); saved eip 0x809f721
 called by frame at 0xbfbe05b0, caller of frame at 0xbfb135f0
 source language c.
 Arglist at 0xbfb135f8, args: lbs=0x90f8090, message_id=5, bedit=1, date=0xbfbe054c "<keep>", attr_name=0x824e1e0,
    attr_value=0xbfbb2db8, n_attr=2,
    text=0x8211140 "<table height=\"694\" cellspacing=\"0\" cellpadding=\"0\" border=\"0\" width=\"674\" style=\"margin-left: 72pt; border-collapse: collapse;\" class=\"MsoNormalTable\">\r\n    <tbody>\r\n        <tr style=\"\">\r\n          "...,
    in_reply_to=0xbfbe04ac "<keep>", reply_to=0xbfbdf678 "<keep>", encoding=0xbfbe04fc "HTML", afilename=0xbfbd77a8,
    mark_original=1, locked_by=0x0
 Locals at 0xbfb135f8, Previous frame's sp is 0xbfb623c0
 Saved registers:
  ebx at 0xbfb623b0, esi at 0xbfb623b4, edi at 0xbfb623b8, eip at 0xbfb623bc
(gdb) bt
#0  0xffffe410 in __kernel_vsyscall ()
#1  0xb7e3e875 in raise () from /lib/tls/i686/cmov/libc.so.6
#2  0xb7e40201 in abort () from /lib/tls/i686/cmov/libc.so.6
#3  0xb7e37b6e in __assert_fail () from /lib/tls/i686/cmov/libc.so.6
#4  0x0804b0b6 in xfree (pointer=0x9176298) at src/elogd.c:714
#5  0x08058903 in el_submit (lbs=0x90f8090, message_id=5, bedit=1, date=0xbfbe054c "<keep>", attr_name=0x824e1e0,
    attr_value=0xbfbb2db8, n_attr=2,
    text=0x8211140 "<table height=\"694\" cellspacing=\"0\" cellpadding=\"0\" border=\"0\" width=\"674\" style=\"margin-left: 72pt; border-collapse: collapse;\" class=\"MsoNormalTable\">\r\n    <tbody>\r\n        <tr style=\"\">\r\n          "...,
    in_reply_to=0xbfbe04ac "<keep>", reply_to=0xbfbdf678 "<keep>", encoding=0xbfbe04fc "HTML", afilename=0xbfbd77a8,
    mark_original=1, locked_by=0x0) at src/elogd.c:4819
#6  0x0809f721 in submit_elog (lbs=0x90f8090) at src/elogd.c:21934
#7  0x080b04e9 in interprete (lbook=0x90f8090 "Testing", path=0x80cdc60 "") at src/elogd.c:25816
#8  0x080b2a53 in decode_post (logbook=0xbfc0a1a0 "Testing", lbs=0x90f8090, string=0x9166614 "",
    boundary=0xbfc0a3a0 '-' <repeats 27 times>, "196291262324084", length=134670) at src/elogd.c:26382
#9  0x080b54fa in process_http_request (
    request=0x9145548 "POST /Testing/ HTTP/1.1\r\nHost: bba.eld.ki.sw.home.se:8000\r\nUser-Agent: Mozilla/5.0 (Windows; U; Windows NT 6.0; en-US; rv:1.9.0.4) Gecko/2008102920 Firefox/3.0.4\r\nAccept: text/html,application/xht"..., i_conn=0)
    at src/elogd.c:26936
#10 0x080b7f0f in server_loop () at src/elogd.c:27746
#11 0x080ba36b in main (argc=3, argv=0xbfc0b924) at src/elogd.c:28797
(gdb) info f 4
Stack frame at 0xbfb135f0:
 eip = 0x804b0b6 in xfree (src/elogd.c:714); saved eip 0x8058903
 called by frame at 0xbfb623c0, caller of frame at 0xbfb135c0
 source language c.
 Arglist at 0xbfb135bc, args: pointer=0x9176298
 Locals at 0xbfb135bc, Previous frame's sp is 0xbfb135f0
 Saved registers:
  eip at 0xbfb135ec
(gdb) info f 5
Stack frame at 0xbfb623c0:
 eip = 0x8058903 in el_submit (src/elogd.c:4819); saved eip 0x809f721
 called by frame at 0xbfbe05b0, caller of frame at 0xbfb135f0
 source language c.
 Arglist at 0xbfb135f8, args: lbs=0x90f8090, message_id=5, bedit=1, date=0xbfbe054c "<keep>", attr_name=0x824e1e0,
    attr_value=0xbfbb2db8, n_attr=2,
    text=0x8211140 "<table height=\"694\" cellspacing=\"0\" cellpadding=\"0\" border=\"0\" width=\"674\" style=\"margin-left: 72pt; border-collapse: collapse;\" class=\"MsoNormalTable\">\r\n    <tbody>\r\n        <tr style=\"\">\r\n          "...,
    in_reply_to=0xbfbe04ac "<keep>", reply_to=0xbfbdf678 "<keep>", encoding=0xbfbe04fc "HTML", afilename=0xbfbd77a8,
    mark_original=1, locked_by=0x0
 Locals at 0xbfb135f8, Previous frame's sp is 0xbfb623c0
 Saved registers:
  ebx at 0xbfb623b0, esi at 0xbfb623b4, edi at 0xbfb623b8, eip at 0xbfb623bc
(gdb)