Re: French Language, posted by Yanick Vachon on Tue Dec 4 21:30:13 2018
|
I Stefan, i got the problem again with the french version, i realised that if i open it with Chrome or Edge it's not working but with Internet Explorer
it works envery times. Is there a way i can use it with Chrome?
|
|
Re: French Language, posted by Stefan Ritt on Wed Dec 5 08:41:07 2018
|
Have you tried to delete all cookies in Chrome?
Stefan
Yanick |
|
Re: French Language, posted by Yanick Vachon on Wed Dec 5 14:38:51 2018
|
I've deleted the cookies and it works.
Thanks!
Stefan |
|
Re: Logbook architecture and availability, posted by Stefan Ritt on Fri Dec 14 16:00:45 2018
|
Sure that's easy. Install elog on each laptop separately, so they run without network. Then, set up a central elog server, and use "mirroring"
as explained in the documentation at https://elog.psi.ch/elog/config.html#mirroring
So when ever the entwork comes back, you execute a manual mirror operation, and your new entries will be pushed to the central elog server. |
|
Re: Logbook architecture and availability, posted by Frank Baptista on Fri Dec 14 17:22:31 2018
|
Thanks Stephan! I guess I was making it harder than it is. I'm still a little fuzzy -- in this instance, am I correct in saying that each
laptop would be considered a "master", and the remote (network) server considered the "slave"? Also, I'm not sure quite sure
-- which server should be assigned responsibility for performing periodic synchronization between the laptop and the central elog server? |
|
Re: Logbook architecture and availability, posted by Stefan Ritt on Fri Dec 14 20:05:08 2018
|
I would call the laptops the "master" being responsible for pushing data to the central server which you can call "slave"
Stefan |
|
Re: Logbook architecture and availability, posted by Frank Baptista on Fri Dec 14 20:52:46 2018
|
Thank you again -- very much appreciated!
|
|
Re: xmalloc error when filling entries and chaning page, posted by Stefan Ritt on Fri Dec 21 13:00:50 2018
|
I tried to reproduce the problem but could not. The config file uses "emtpy.html", "filtermenutext.html" and so on which I don't
have. Same with eventlocation.
Rather than sending me all the files, can you strip down your elogd.cfg to a minimal version where you still see the problem. Then give me all |