Thanks! now install works fine - but I cannot find how to open and start writing- I do

/usr/local/sbin/elogd
elogd 3.0.0 built Feb 13 2015, 16:42:32 revision 21dc563
CKeditor detected
ImageMagick detected
Indexing logbooks ... done
Server listening on port 8080 ...

but nothing pops up...I mean it is not possible to run "offline" ie locally on my mac ?

Point your browser to http://localhost:8080 as written in the documentation

Fantastic. I forgot the icon and when I resent nothing was left. 

Here goes again!

I have been running Elog for years on a Win2K machine with no email problems. I have been forced to move it to a WinXP machine and I always get this message under WinXP: "Error sending Email via "netsvr10.prod.company.com": Cannot connect to server"

I noticed this a long time ago but was not concerned until I wqas forced to use WinXP. We have years of data in the Elog and to lose the use of it would hinder our operation a lot.

Here is an entry from the elog.log file when it worked under Win2K:

28-Oct-2009 18:28:38 [609144@199.82.127.9] {Generals} NEW entry #0
28-Oct-2009 18:28:38 [609144@199.82.127.9] {Generals} Email from <christophermeyer@fedex.com> to david.spindler@company.com, SMTP host smtp.mail.company.com
28-Oct-2009 18:28:42 [609144@199.82.127.9] {Generals} 220 netsvr10.prod.company.com -- Server ESMTP (Sun Java(tm) System Messaging Server 6.3-8.01 (built Dec 16 2008; 32bit))

Here is an entry from today's elog.log under WinXP that does not work.

06-Mar-2010 11:48:23 [117361@127.0.0.1] {Gbld} NEW entry #0
06-Mar-2010 11:48:23 [117361@127.0.0.1] {Gbld} Email from <david.spindler@company.com> to david.spindler@company.com, SMTP host smtp.mail.company.com
06-Mar-2010 11:48:23 [117361@127.0.0.1] {Gbld} READ entry #1612

We use an SMTP server without authentication.
 

 I picked a bad example with an IP address of 127.0.0.1, but it is the same as a valid IP address such as the working entries above or the entry below.

06-Mar-2010 10:31:43 [117361@199.81.166.149] {Gbld} READ entry #1691
06-Mar-2010 10:39:10 [117361@199.81.166.149] {Gbld} NEW entry #0
06-Mar-2010 10:39:11 [117361@199.81.166.149] {Gbld} Email from <david.spindler@company.com> to david.spindler@company.com, SMTP host smtp.mail.company.com

The only idea I have is that your Windows firewall prevents outgoing network traffic on port 25 (SMTP). You should put an exception into the firewall rule. You can try that by opening a DOS box and entering

telnet smtp.mail.company.com 25

if you see a reply, the traffic is allowed. If it blocks, the firewall prevents this kind of traffic.

 I have tried setting up a VM (VMWare) with W2K  and testing it out on both a W2K and WXP host. In both cases the Elog successfully sends emails. I don't know if this helps, or not.

The only idea I have is that your Windows firewall prevents outgoing network traffic on port 25 (SMTP). You should put an exception into the firewall rule. You can try that by opening a DOS box and entering

telnet smtp.mail.company.com 25

if you see a reply, the traffic is allowed. If it blocks, the firewall prevents this kind of traffic.

My apologies. I just realized that my first answer to you was lost. I turned the firewall completely off with no luck. I also tried the telnet and it worked. So, it does not appear to be the firewall. I tried the VM's afterwards. Another puzzle is that the Win2K VM works on a WinXP host. It seems like it is only the WinXP elog that fails. I have tried to obtain some our company's IT help with no luck.

 Just an idea: could you try specifying an IP address for your SMTP server instead of smtp.mail.company.com ?

I would also try to make a manual SMTP session to see if that works.

Otherwise, next step would be to create a VM installed with Wireshark to record the network traffic that ELOG generates when it makes the SMTP connection.

Soren