Re: IE 11 - Text Edit Toolbar Not Working, posted by Stefan Ritt on Mon Aug 17 09:55:16 2015
|
Also make sure you don't have "Compatibility Mode" turned on in IE11.
See here for example: http://winaero.com/blog/how-to-enable-compatibility-view-in-internet-explorer-11-ie11/
| Andreas Luedeke wrote: |
|
This reply has been written with IE 11 using the embedded HTML editor of ELOG. Therefore it is obviously not a problem of ELOG 3.1.1 with IE 11.
It could be a problem with your ELOG installation or it could be a problem with you IE 11 configuration. Can you use the HTML editor of this forum with IE11? Did you install ELOG 3.1.1 on top of an existing ELOG installation?
There was a recent post in the forum about IE11 and the HTML editor in the Forum. Did you read it?
Cheers, Andreas
| John Krautkramer wrote: |
|
Hi,
I've been exploring elog. I find when using IE 11, the text editor formatting buttons don't work with HTML encoding selected. The entire toolbar is grayed out. It appears to work fine with Chrome. Any ideas or direction to look? elog v3.1.1 is running on RedHat EL5. I've tried the rpm installation, and source code compilation and installation with no change.
Any input would be greatly apriciated!
John
|
|
|
|
Re: IE 11 - Text Edit Toolbar Not Working, posted by John Krautkramer on Mon Aug 17 16:30:17 2015
|
The issue was IE Compatibility Mode. There were no websites in the list, but the "Display intranet sites in Compatibility View" was checked. Removing this fixed it.
Thanks for the help!
John
| Stefan Ritt wrote: |
|
Also make sure you don't have "Compatibility Mode" turned on in IE11.
See here for example: http://winaero.com/blog/how-to-enable-compatibility-view-in-internet-explorer-11-ie11/
| Andreas Luedeke wrote: |
|
This reply has been written with IE 11 using the embedded HTML editor of ELOG. Therefore it is obviously not a problem of ELOG 3.1.1 with IE 11.
It could be a problem with your ELOG installation or it could be a problem with you IE 11 configuration. Can you use the HTML editor of this forum with IE11? Did you install ELOG 3.1.1 on top of an existing ELOG installation?
There was a recent post in the forum about IE11 and the HTML editor in the Forum. Did you read it?
Cheers, Andreas
| John Krautkramer wrote: |
|
Hi,
I've been exploring elog. I find when using IE 11, the text editor formatting buttons don't work with HTML encoding selected. The entire toolbar is grayed out. It appears to work fine with Chrome. Any ideas or direction to look? elog v3.1.1 is running on RedHat EL5. I've tried the rpm installation, and source code compilation and installation with no change.
Any input would be greatly apriciated!
John
|
|
|
|
Send e-mail based on a hierarchy of attributes?, posted by Phil Rubin on Mon Aug 24 20:40:14 2015
|
Is there a way to distribute e-mail based on the consideration of several attributes and values? A simple example: attributes type and category have several different values, say, routine and problem for type and hardware and software for category, but one would only like messages sent when there's a problem to different sets of hardware or software types. Thus:
Email
type routine category hardware = no message
category software = no message
type problem category hardware = a@bcd.efg, h@ijk.lmn
category software = 1@opq.rst, 2@uvw.xyz |
Re: Send e-mail based on a hierarchy of attributes?, posted by Andreas Luedeke on Wed Aug 26 09:18:17 2015
|
Yes, this can be done. See below for an example configuration.
Attributes = entrytype, category
Options entrytype = routine{1}, problem{2}
Options category = software, hardware
{1} Email category software =
{1} Email category hardware =
{2} Email category software = 1@opq.rst, 2@uvw.xyz
{2} Email category hardware = a@bcd.efg, h@ijk.lmn
| Phil Rubin wrote: |
|
Is there a way to distribute e-mail based on the consideration of several attributes and values? A simple example: attributes type and category have several different values, say, routine and problem for type and hardware and software for category, but one would only like messages sent when there's a problem to different sets of hardware or software types. Thus:
Email
type routine category hardware = no message
category software = no message
type problem category hardware = a@bcd.efg, h@ijk.lmn
category software = 1@opq.rst, 2@uvw.xyz
|
|
|
User based theme selection , posted by Oliver Kleinau on Thu Sep 3 07:09:33 2015
|
| Hi,
is it somehow possible to use different themes for different users?
Perhaps editing the password XML file?
Thanks,
Oliver |
|
Re: User based theme selection , posted by Andreas Luedeke on Fri Sep 4 10:04:20 2015
|
No, I don't think it is possible.
| Oliver Kleinau wrote: |
| Hi, is it somehow possible to use different themes for different users? Perhaps editing the password XML file? Thanks, Oliver |
|
elog client overwriting attached files when editing existing log, posted by Joseph McKenna on Wed Sep 16 01:27:20 2015
|
Using the elog client to upload atachments, I can successfully send attachments to an existing elog, however the existing attachments are lost.
I have tested using the elog client version 3.1.1 and elog client version 2.9.2 sending to elogd 2.9.0
elog -h localhost -p 8080 -l test -f file1.png -f file2.png -e 249 -v -x
This works great, the text contained in the elog post is retained, however all attachments are lost and replaced with those sent by this command.
Can anyone provide some tips? I am not sure if its a problem with the client or server.
Thank you in advance!
Joseph
|
|
elog client overwriting attached files when editing existing log, posted by Joseph McKenna on Wed Sep 16 02:47:33 2015
|
Using the elog client to upload atachments, I can successfully send attachments to an existing elog, however the existing attachments are lost.
I have tested using the elog client version 3.1.1 and elog client version 2.9.2 sending to elogd 2.9.0
elog -h localhost -p 8080 -l test -f file1.png -f file2.png -e 249 -v -x
This works great, the text contained in the elog post is retained, however all attachments are lost and replaced with those sent by this command.
Can anyone provide some tips? I am not sure if its a problem with the client or server.
Thank you in advance!
Joseph
|