Re: Logging entries from the command line, posted by kenzo Abrahams on Mon Oct 26 12:17:40 2015
|
Yes I can it works perfectly from the browser.
Stefan
Ritt wrote:
This indicates that the username/password is not correct. Can you log |
|
Re: Logging entries from the command line, posted by kenzo Abrahams on Mon Oct 26 12:26:03 2015
|
Hi Stephan I got it to work for some reason elog was complaining that my encoding of the message wasnt allowed. I allowed the lognook to allow ELcode
and it works perfectly.
Thank you for the help. |
running more then one shell command when new entries is submitted, posted by kenzo Abrahams on Tue Oct 27 11:03:49 2015
|
Hi
Im just curious is it possible to run more then one command using Execute new = <command> or will i have to run a script to run muliple
commands. |
|
Re: running more then one shell command when new entries is submitted, posted by kenzo Abrahams on Tue Oct 27 11:14:16 2015
|
The reason why im asking if it can be done using the Execute option is because I need to have the message id of the entry that was submitted and in an
external script i dont have access to the variable
kenzo |
|
Re: running more then one shell command when new entries is submitted, posted by Stefan Ritt on Tue Oct 27 11:19:41 2015
|
The command is passed to your shell, and some shells except more than one command. Most Linux shells accept commands separated by ';', which
you can try yourself by entering for example: ls *.c; ls*.h
kenzo |
|
Re: running more then one shell command when new entries is submitted, posted by kenzo Abrahams on Tue Oct 27 11:23:36 2015
|
If i put the ';' into Execute the rest of the command becomes a comment thats why i was trying to use '&&' instead. If I encapulate
the whole command in "" or '' then both commands are executed but the files im trying to write to gets created but no data is piped into
it. When I use Execute with one command and pipe its output to a file everything works fine though. |
|
Re: running more then one shell command when new entries is submitted, posted by Andreas Luedeke on Tue Oct 27 12:20:16 2015
|
As far as I know ELOG is recognising a configuration line as a comment only when it starts with a ';'.
I can assure you that
ELOG does not treat the rest of the line as a comment when you use a ';' within a $shell() command: I do it a lot and it works fine. Here's
a simple, generic example using the bash:
Preset Author = $shell(if [ $short_name = "Anonym" ] ;then echo $Author;else echo |
|
dynamic "preset text" option without remplace text if it has changed, posted by Dani on Tue Oct 27 15:41:57 2015
|
Dear all,
Is it possible to have a dynamic "preset text" option without remplace text if it has changed?
I would like to switch the template file depending on the attribute value (Type). |