Re: Monitoring a logbook for changes, posted by Stefan Ritt on Wed Jan 13 19:22:35 2016
|
You look here: http://midas.psi.ch/elog/config.html and scroll down to "Execute New". I wonder how you ever could run elog without looking
at that page.
Tamas |
|
Re: Monitoring a logbook for changes, posted by Tamas Gal on Wed Jan 13 19:26:35 2016
|
OK thanks I'll check that out. I did not configure ELOG by myself, I only use it and wrote the Slack plugin ;-)
Stefan
Ritt wrote:
You look here: http://midas.psi.ch/elog/config.html and scroll |
|
Re: Monitoring a logbook for changes, posted by Johan Forsberg on Wed Jan 13 20:08:04 2016
|
Aha, that's interesting too! I'll have to look more carefully through the documentation... :)
Stefan
Ritt wrote:
You guys know that there is the possibility to execute an arbitrary |
drag and drop attachments only working for admins if "restrict edit = 1", posted by Devin Bougie on Tue Jan 19 22:03:36 2016
|
I'm finally able to reproduce this, and my initial description was incorrect. If we have "restrict edit = 1", only an "Admin
user" can use the "Dop attachments here..." or the "Image" button in the CKEditor. The old "Choose File,"
"Upload" buttons, however, works just fine for anyone. |
|
entry does not appear in list while it is being edited, posted by Devin Bougie on Wed Jan 20 20:38:17 2016
|
When an entry is being edited, it does not appear in the list once it's been autosaved or the editor manually clicks on "Save." This
has been reproduced in the "Linux Demo" forum on this site, as well as on a clean installation of the 3.1.1 binary on EL6.
It would be great if there was a configuraiton option to control this, but I haven't found it yet. To reproduce: |
Re: entry does not appear in list while it is being edited, posted by Andreas Luedeke on Thu Jan 21 11:39:18 2016 
|
Hi Devin,
this is the intended bevaviour, there is nothing wrong with that.
Only a submitted entry should be visible to
the world.
If you would have played a little bit longer, you would have found out yourself how you'll get access again to this so-called
"draft" entry after closing the browser window:
as soon as you attempt to create - as the same user - an new entry, you'll |
|
Re: entry does not appear in list while it is being edited, posted by Devin Bougie on Thu Jan 21 16:00:30 2016
|
Thanks, Andreas. I was aware of the "pending draft" menu, and I am aware that you can manually browse to an entry even if it doesn't
appear in the list. However, for our operations group it is a requirement that any saved entry appears in the list, even if it's in the process
of being edited. We won't be able to upgrade until this is possible. |
|
Re: entry does not appear in list while it is being edited, posted by Stefan Ritt on Fri Jan 22 10:12:33 2016
|
I have a question here. You say "previsous releases didn't have this problems". Well, they did not have the auto-save feature. You can
turn this off if you like with "autosave = 0". This also removes the "Save" button so elog behaves exactly as before.
I decided NOT to show draft entries in the list, because these are entries currently under editing, and maybe the editor does not want others |