thanks Andres for your response!

I was thinking that it cannot be possible, but , I had to try to ask in the forum.

for my question, I think that this could be left on user responsibility to take care about it, and add a comment the the text fied, explaining that will be erased the html text on change the text field.

Thanks four your time.

> > Is there something else  which is making this difficult to do?
> 
> Not really, but hsearch() & Co. are not available under Windows, so I have to extract the
> source code from the GNU C libarary or so. Since the last discussion I had lots of other
> topics on my to-do list, such as mirroring and cloning, but the speed issue is getting more
> and more up on the priority list.

Speaking of windows I'd like to note that when I moved my call tracking config from a slow BSD
system (PPro 200Mhz) to a faster windows system (P3 733M) I noted a huge slow down in the
interface.  Talking about perhaps 1-2 seconds before to 10-15 seconds after.  Using
sysinternals file monitor I see that elogd is hammering each log file in the directory.  Not
sure what else is going on.  309 log files - only 1.25Meg.  

Anything I can do short of pruning down the files?

[Edit:  In both cases above my default view is filtered and sorted - so that I only see things
with a specific status.  Taking away the filtering resolves this hit - but does not explain the
speed difference between platforms.]

-D

Using the "Link Display  =" I can turn of the link to each individual entry, however, I would like to have a custom link in one of my columns. Is this possible?

Thanks for this wonderful tool.

Don

We have been successfully using the TCK-##### for several months and suddenly today it has stopped incrementing. We were at ticket # 40 and this morning any new tickets come up as 12 and never increment? We have tried restarting the elog service. Any suggestions would be appreciated.

Thank You

Don

My apologies for posting this question. I have found the solution.

We had two log books each with the same variable called "Ticket" but different values. When an entry from one was Moved to the other the counter was confused. I had to manually change the value of "Ticket" to match the convention of the log book that the entry was now in.

Thanks

Hi there. Just started recently set up the application and think its very usable and easily configured - great stuff

I'm looking to roll it out to the masses but have a slight logistical problem in that we work on 2 separate networks - NET1 with connection to the internet, and NET2 physically isolated from NET1 and the internet.

It would be desirable to allow users to add/update/delete logs from both NET1 and NET2 with periodic synchronisation.

I believe the mirroring facility is what should be used, and think the following setup and synchronisation steps may be workable:

Setup:

• elog installed on node of NET1
• elog installed on 2 nodes of NET2
• elog server running on NET1 and node1 of NET2 both using a common elogd.cfg

Performing Synchronisation:

1. Stop the server on NET1
2. copy logbook directories from NET1 to node2 of NET2
3. start server on node2 of NET2 using the -M option
4. once above complete, copy logbook directories from node 2 NET2 to NET1
5. Start the server on NET1

Am I on the right track?

Would very much appreciate your comments and advice on the above.

Cheers Dougie

Hi!

This just started happening here also.  Some users can't get on to a SSL=1 config'd elog using either IE or firefox 10 (win7 or linux) or chrome.  SAFARI works.  Occurs in 2.8.0 and a newly built (even after

ssl yum updates) 2.9.0 version on SL5.5 system.  Seems to accept self signed cert then nothing.. (connection reset message).   Tried an stunnel from one port to port running elog

with SSL=0.  Same behavior.  Doesn't work on some browsers.  Any clues?

Thanks,

-John