Re: curly parenthesis problem {smiley}, posted by Stefan Ritt on Tue Aug 3 16:18:45 2004
|
> Everything after curly parenthesis is ignored in attribute entry boxes
> like 'Subject' above
>
|
Re: User/Admin privlege question, posted by Stefan Ritt on Tue Aug 3 16:34:23 2004
|
Ok, now I see your problem. You defined a "Guest menu commands" which explicitly allows
not-authorized access (that's what it's for). If you only want to allow authorized
access, remove the "guest menu commands" from the logbook sections and also from the
|
Re: User/Admin privlege question, posted by Alexandre Camsonne on Tue Aug 3 20:14:55 2004
|
Thank you, I misunderstood how the "Guest menu commands" worked I thought I had to specify
a limited set of commands to actually limit guest users.
|
THREAD DISPLAY = sucks up coded spaces, posted by Steve Jones on Fri Aug 6 22:35:10 2004
|
I was trying to do some hard coded spaces using:
Thread display = For: $Date for Shutdown. $DataCenter:
|
|
Re: THREAD DISPLAY = sucks up coded spaces, posted by Stefan Ritt on Sun Aug 8 16:25:09 2004
|
> I was trying to do some hard coded spaces using:
>
> Thread display = For: $Date for Shutdown. $DataCenter:
|
Re: THREAD DISPLAY = sucks up coded spaces, posted by Steve Jones on Tue Aug 10 20:11:38 2004
|
> > I was trying to do some hard coded spaces using:
> >
> > Thread display = For: $Date for Shutdown. $DataCenter:
|
|
Re: too many <table> tags, posted by Steve Jones on Thu Aug 12 23:32:46 2004
|
> > Couldn't one include the extra <table> tag only when there is really more than
> > one attribute per line. All other lines could then be aligned properly.
>
|
|
URL bug in elogd.cfg, posted by Steve Jones on Mon Aug 16 23:49:13 2004
|
Under 2.5.4-2 build1.460, when I edit the demo elogd.cfg the following happens:
- I start with
|