> Everything after curly parenthesis is ignored in attribute entry boxes 
> like 'Subject' above
> 
> What I typed in the subject line was exatcly this:
> 
>   'curly parenthesis problem {abc}'

Just don't use curly brackets (;-)

Nevertheless I fixed it in the current version (see subject)

Ok, now I see your problem. You defined a "Guest menu commands" which explicitly allows
not-authorized access (that's what it's for). If you only want to allow authorized
access, remove the "guest menu commands" from the logbook sections and also from the
[global] section.

Please note that if an option is not preent in a logbook section, it is looked for in
the [global] section. I see that most of your logbooks have similar settings. Just put
them into the [global] section, and override it in the logbook section if they are
different.

Thank you, I misunderstood how the "Guest menu commands" worked I thought I had to specify
a limited set of commands to actually limit guest users.

Thanks again for your wonderful work on this program too.

Regards,

Alexandre

> Ok, now I see your problem. You defined a "Guest menu commands" which explicitly allows
> not-authorized access (that's what it's for). If you only want to allow authorized
> access, remove the "guest menu commands" from the logbook sections and also from the
> [global] section.
> 
> Please note that if an option is not preent in a logbook section, it is looked for in
> the [global] section. I see that most of your logbooks have similar settings. Just put
> them into the [global] section, and override it in the logbook section if they are
> different.

I was trying to do some hard coded spaces using:

Thread display = For: $Date for Shutdown.   $DataCenter:
$short summary. Coordinator: $Shutdown Coordinator.

The spacing actually works mthe first time, but upon going back into editing
the config file, the coded spaces are gone, replaced with real spaces, and
when saved all real multiple spaces are, as one would expect, ignored.  The
spacing reverts back to normal.

I tried other html tags but these show up as literals.

Thanks

> I was trying to do some hard coded spaces using:
> 
> Thread display = For: $Date for Shutdown.   $DataCenter:
> $short summary. Coordinator: $Shutdown Coordinator.
> 
> The spacing actually works mthe first time, but upon going back into editing
> the config file, the coded spaces are gone, replaced with real spaces, and
> when saved all real multiple spaces are, as one would expect, ignored.  The
> spacing reverts back to normal.
> 
> I tried other html tags but these show up as literals.

I fixed that in revision 1.448. The problem also showed up even in normal
logbook entry displays and in replies (before this fix, the   in this text
whould not have shown up). Get the new version from CVS.

> > I was trying to do some hard coded spaces using:
> > 
> > Thread display = For: $Date for Shutdown.   $DataCenter:
> > $short summary. Coordinator: $Shutdown Coordinator.
> > 
> > The spacing actually works mthe first time, but upon going back into editing
> > the config file, the coded spaces are gone, replaced with real spaces, and
> > when saved all real multiple spaces are, as one would expect, ignored.  The
> > spacing reverts back to normal.
> > 
> > I tried other html tags but these show up as literals.
> 
> I fixed that in revision 1.448. The problem also showed up even in normal
> logbook entry displays and in replies (before this fix, the   in this text
> whould not have shown up). Get the new version from CVS.

As always - fantastic!

Thanks

> > Couldn't one include the extra <table> tag only when there is really more than
> > one attribute per line.  All other lines could then be aligned properly.
> 
> Sure one can do a lot of things if one has enough time and not tens of other
> requests on the wishlist which really concern some functionality and not just
> cosmetics.

Ouch!
And just to add insult to injury, the same <table> structure doesn't even look the
same between, say, IE6.0 and FireFox 0.9!!

Stefan, keep up the good work!

Under 2.5.4-2 build1.460, when I edit the demo elogd.cfg the following happens:

- I start with
URL = http://cde-tx32-sds01.subdom.dom.com:8080/

- When I go to edit the global section of the config file, the *display* of
the string is changed to:
URL = <a
href="http://cde-tx32-sds01.subdom.dom.com:8080/">http://cde-tx32-sds01.subdom.dom.com:8080/</a>

- Saving this results in an error in that the rendered url is invalid.

Our current running version is 2.5.4-build1.413 and this behavior is not
evident.  I've looked through the diffs but could not identify the genesis
of this new behavior.

Thanks