Hello,

   Thank you for such a great software package!

   I would like to ask how I can display the Revisions field in the single entry view but not in the list view. I followed the FAQ instructions and added the following to my elodg.cfg:

   Attributes = Author, Type, Category, Subject, Revisions
   Locked attributes = Revisions
   Subst on Edit Revisions = $Revisions
$date by $long_name

   This configuration shows the Revisions field in both the list view and the single entry view. This was a problem because certain entries are changed a lot so they took up a lot of horizontal space in the list view. I tried to remove the Revisions field in the list view but keep them in the single entry view with the following:

   Attributes = Author, Type, Category, Subject
   Show Attributes = Author, Type, Category, Subject, Revisions
   Locked attributes = Revisions
   Subst on Edit Revisions = $Revisions
$date by $long_name

   This took the Revisions field out of the list view and also the single entry view. However, the fields that were shown in the single entry view ended up as Author, Type, Category, Subject, Author (again).

   The last attempt were with the following configuration lines:

   Attributes = Author, Type, Category, Subject
   Show Attributes = Revisions
   Locked attributes = Revisions
   Subst on Edit Revisions = $Revisions
$date by $long_name

   This showed Author, Type, Category, Subject in the list view but only the Author field in the single entry view.

   How can I configure Elog to show the Revisions field in the single entry view but no the list view?

Thanks,
   - Dan

Attributes = Author, Type, Category, Subject, Revisions
Show Attributes = Author, Type, Category, Subject, Revisions
Locked attributes = Revisions
Subst on Edit Revisions = $Revisions $date by $long_name
List Display = ID, Date, Author, Type, Category, Subject

Attributes = Author, Type, Category, Subject
Show Attributes = Revisions
Locked attributes = Revisions
Subst on Edit Revisions = $Revisions $date by $long_name
List Display = ID, Date, Author, Type, Category, Subject

Hello,
I have been running Elog for a long time on a variety of RedHat releases,
(this is a terrific project by the way). Currently running Elog v2.5.7 on 
RedHat (Fedora Core-II) and most is working great excepting being able to 
modify the default fonts being used by Elog when trying to write and save 
in text mode while in Elog's main editing screen. 

On my setup the font size is way too small and to work around this problem 
I write and save everything in HTML mode. I've browsed the Elog css file 
but don't yet see where or how to properly set the default font style or 
size for the main screen in the editor. Can you shed some light on this for 
me?

--
Regards, Greg

Hi Adam,

You might double check your file names vs. HTML tags. It appears in your example above that your HTML tag is requesting a file named: "1n2.jpg" and your image file name is "In2.jpg". Please note that in the first case the file name starts with (1) a numeral one and in the second case the file name start with a capital (I) a capital I.

Greg

Hello,

I have installed the latest elog version from your web site.

My Admin user and my Login user are set in the elog.cfg to use the Self register process within the first login.

The issue is that I get only one time access to my log on the server (XP) and that is direct after the Selfregister process.

If I log out and login to test my admin and user account I will not get access to my server anymore.

My login page stays without any error message.

1 Notebook  XP Client internet explorer http://host ip:8080/demo------> 2nd Notebook XP Server

I have the deleted the cookies after each try.

I have retested later the accounts several times (login/logout) successful with the internet explorer http://host ip:8080/ on the server itself.

 Please could you help me to identify the issue?