| Dan Chitwood wrote: | | We are having trouble on our logbook with posts appearing twice. Both posts contain the same ID number, time, etc. This most often occurs when the e-log entry is being written for an extended period of time (ie. more than 30 minutes), but I don't know if that is the root cause of the problem. It may also be related to posts that are edited after an initial posting. Could this be due to an improper setting in our config file? |
Besides the trivial case that people hit the submit button twice I can only imagine one possible cause: If you edit an existing entry, there is a button Resubmit as new entry at the bottom. If that button is checked, the old entry gets deleted and a new one gets submitted. If the delete of the old entry fails for some reason, you could maybe get two entries.
May I suggest following: Use a very simple config file (like the demo one from the distribution) and see if you can reproduce the problem. If not, add you config options one by one to the config file, and see at which option the problem starts. This way you might find the cause of it.
Your problem has not been reported by anybody else so far, so chances are high that it's related to a config setting. |
I have a similar problem. I am using Windows version, and whenever I use the elog client to send entry, it will not take with MOptions set. I usually have 2 attributes required (both MOptions), and I get the message that it is missing a required attribute. When I use ROptions, or Options, it works fine. Is there a problem with MOptions, or am I perhaps using a badly formatted commandline?
Commandline as follows: C:\elog>elog -h IP_ADR -p 80 -l gbld -u username password -a Type=Other -a Operator=SCADA -a Category=Controls -a Subject=Alarm "Please ignore."
Type and Category are required and MOptions.
Below is the pertinent part of the config file:
;***** Attribute Section
Attributes = Log Date, Operator, Type, Category, Engine, Work Order #, EPN, Fuel Tank 1 (A&B), Fuel Tank 2 (C&D), Engine Hours Stop, Engine Hours Start, Email To, Subject
Comment EPN = (Equipment Piece Number)
Comment Fuel Tank 1 (A&B) = (West)
Comment Fuel Tank 2 (C&D) = (East)
MOptions Type = Alarm, Trouble, ESP, Haz. Wx.,Problem, PM, Routine, Load Test, Other
MOptions Category = Engine, Generator, Controls, Fuel, Oil, HV Switchgear, MLG&W, Other
Options Engine = All, 1A, 2A, 3A, 4A, 5A, 1B, 2B, 3B, 4B, 5B, 1C, 2C, 3C, 4C, 5C, 1D, 2D, 3D, 4D, 5D, A Bus, B Bus, C Bus, D Bus, A&B Busses, C&D Busses, West Gen (001), East Gen (002)
Required Attributes = Type, Category, Subject
If time permits, I would appreciate any help possible.
BTW, I like the additional elcode. |