I'm slowly able to see the finish line

Now all I need to do is get SSL to work. My server name is hf-info-elog and I'm not sure what the correct values for Port= and URL= should be.

thank
Tom (the green-horn)

Firstly, as with some of the others recently, I am a complete newb when it comes to linux, Though I refuse to let that stop me and really want to get this working.

Pretty much I have a situation where I have been asked to install ELOG, though I am unable to use port 25 at all and also need to use GMAIL for the SMTP server?
It is also my undertanding from the documentation that ELOG only sends mail via port 25

So, I have setup iptables to forward everything from port 25 and a GMAIL IP address used in ELOG's global config for the SMTP, to a stunnel that redirects everything to GMAIL on port 465.
While getting that right took me almost two days, and that was with tons of help and more than half of it being spoon fed to me (though I have learnt SO SO MUCH from just that).
I am still unable to get ELOG to send emails, even if does now seem to connect

Below is a copy of the log from last night (I have spent most of the day trying to sort it out further, but I get the same error)

So I guess my question is, Is it possible to use GMAIL, with ELOG, based on my current conditions, and does anyone have any idea what I can do to go on from here, as I doubt I am the first one to head down this road?
 

--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

10-Apr-2012 21:45:19 [Chris@1.2.3.4] {logbookA} Email from <chris@server.com> to chris@server.com, SMTP host 173.194.67.108:
10-Apr-2012 21:45:20 [Chris@1.2.3.4] {logbookA} 220 mx.google.com ESMTP XXXXXXXX.XX^M
10-Apr-2012 21:45:20 [Chris@1.2.3.4] {logbookA}
10-Apr-2012 21:45:20 [Chris@1.2.3.4] {logbookA} EHLO SERVER.COM^M
10-Apr-2012 21:45:20 [Chris@1.2.3.4] {logbookA} 250-mx.google.com at your service, [152.106.18.2]^M
10-Apr-2012 21:45:20 [Chris@1.2.3.4] {logbookA} 250-SIZE 35882577^M
10-Apr-2012 21:45:20 [Chris@1.2.3.4] {logbookA} 250-8BITMIME^M
10-Apr-2012 21:45:20 [Chris@1.2.3.4] {logbookA} 250-AUTH LOGIN PLAIN XOAUTH^M
10-Apr-2012 21:45:20 [Chris@1.2.3.4] {logbookA} 250 ENHANCEDSTATUSCODES^M
10-Apr-2012 21:45:20 [Chris@1.2.3.4] {logbookA} AUTH LOGIN^M
10-Apr-2012 21:45:21 [Chris@1.2.3.4] {logbookA} Username:
10-Apr-2012 21:45:21 [Chris@1.2.3.4] {logbookA} username@gmail.com
10-Apr-2012 21:45:21 [Chris@1.2.3.4] {logbookA} Password:
10-Apr-2012 21:45:21 [Chris@1.2.3.4] {logbookA} MYXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
10-Apr-2012 21:45:21 [Chris@1.2.3.4] {logbookA} 501 5.5.2 Cannot Decode response fl2sm792152wib.2

--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------


Right now I am pretty stuck, and any advice would be greatly appreciated on how to move forward.

Thanks in Advance
 

Hi,

I was wondering what is the correct way so that the author field when a reply is made shows the author of the
person making the reply.
In version 2.6, the field was filled correctly but since upgrading to ELOG V2.9.1-2435 due to the ssh problem
the field just keeps the author of the original post.

I have a tried a number of subst on reply Author = $long_name with no luck.

Any ideas?

Cheers,
Aldo

Hi,

I'm trying to set up elogd, running on port 8080 behind an Apache server on port 80, using mod_proxy to redirect
to the elogd server, and the recommended

Redirect permanent /elogbook http://example.com/elogbook/
ProxyPass /elogbook/         http://example.com:8080/

This works well for non-password-protected logbooks, but for password protected (that I can access fine via port
8080), I keep getting shown the Login page, even with valid username / password.    

Poking around the code, it appears (probably not too surprisingly) that the issue lies in check_login().  
For example, 

   /* if invalid or no session ID, show login page */
  if (!skip_sid_check && !sid_check(sid, user_name)) {
      if (isparam("redir"))
         strlcpy(str, getparam("redir"), sizeof(str));
      else
         strlcpy(str, isparam("cmdline") ? getparam("cmdline") : _cmdline, sizeof(str));
      /* avoid recursive loops with ?cmd=Login */
      if (stristr(str, loc("Login")))
         str[0] = 0;
      /*  added write_logfile here...
          char mstr[250];
          sprintf(mstr, "show_login B %s isparam: %d, cmd: %d, skip_sid_check: %d, sid_check: %d",
                         user_name,  isparam("redir"), isparam("cmdline"), skip_sid_check, sid_check(sid,
user_name));
           write_logfile(lbs, mstr);

        */
      show_login_page(lbs, str, 0);
      return FALSE;
}

and the logfile shows that user_name is blank(!!) and redir, cmdline, skip_sid_check, and sid_check(sid,
user_name) all to be 0.   In fact, isparam("unm") and isparam("upwd") are also 0, which explains why user_name
is blank.   But the log file also shows

LOGIN user "username" (attempt)
LOGIN user "username" (success)

just prior to this!

I'd guess that the form POST methods aren't being forwarded correctly, but I haven't looked at it in any more
detail.   

Is there a way to make this (password protecting logbooks while also using a proxy to Apache) work?

Thanks!

Hi,

the manual says:

"
There are four ways through which access to a logbook may be controlled:

it may be open for all to read ;
it may require a common "read" password for all users ;
it may require each user to have an individual user account (login name) and password ;
finally, access may be granted or not depending on the address of the workstation you are using.
"

But it doesn't say how to do so or at least I didn't find it.

If I have each user have to log in with an individual accout, can I define which logbooks he can read and/or modify?
If yes, how to do that?

Also, please accept my vote for user groups. We can use that, too.

TIA,
Roland.

Hi there,

I am new to ELOG, trying to add an image (logo) in my top text.

Theme = default
Comment = TRIPLE POINT Log
Top text = Logo.png

results in ‰PNG  .

When I just enter a string of text it seems to work fine... I would really appreciate any help!

thanks!

Our group is interested in installing elog on a small/low-cost processing platform so that we can provide ready-to-run systems for our collaborators to use.  We selected a candidate platform form Technologic Systems, their wifibox-2 (http://www.embeddedarm.com/products/board-detail.php?product=TS-WIFIBOX-2).  This product is based on the TS7553 CPU board (http://www.embeddedarm.com/products/board-detail.php?product=TS-7553#) which has a 250MHz Cavium ARM9 CPU.

We have had good success getting the elogd executable cross-compiled for use on this platform and have a working system.  However, we are having significant issues with performance.  When we click the "New" item to enter a new event there is a noticable delay.  When clicking "Submit" there is a delay of approximately 10 seconds before the browser window displays the new event.  With the elogd running on other platforms (Virtual Machine or netbook) the delays for these actions are very small - typically less than a second or imperceptible.

So here are some specific questions:

- Is it reasonable to expect a 250 MHz ARM processor to serve an elog logbook with user acceptable performance?

- Our cfg file is attached.  Is there anything in the cfg file creating this performance problem.

- I have spent some time looking at this, and suspect that the delay is due to the cpu load of all the string manipulation and comparison operations (1200 calls to getcfg() on a submit).  Are there other candidate sources of performance issues that should be considered?

- Does anyone have any suggestions on how to improve our performance?

- Does anyone have a suggestion for an alternative small and low-cost COTS platform to use to host the elogd application?  (We would prefer to attain satisfactory performance on the Wifibox-2.)

Thanks for any help that can be offered.

Tim

Hi!

After submitting a new record with preset "Locked attributes" not even admin user is able to edit these entries.

What seems to be the problem?

Note my config

Logbook Tabs = 0
Theme = default
Date Format = %Y, %B
Title Image= <img border=0 src="konturlogo_dynamate.png" alt="DynaMate logo">
Logout to main = 1
Mode commands = 0
List after submit = 1
Use Email From = weblog@dynamate.se
Use Lock = 1
Password file=improvements_qpp.pwd
Admin User = sssuxo, sssuga
Self register = 3
Restrict edit = 1
Login expiration = 0
Display Email recipients = 0
Preset text = qpp_improvements.txt
Comment = Improvements Uppdragsprocessen
Attributes = Namn, Avdelning, Telefonnummer, Rubrik, Ansvarig, Beräknad klar, Verkligt klar, Status, Status2
Required Attributes = Namn, Avdelning, Telefonnummer, Rubrik
Locked attributes = Ansvarig, Beräknad klar, Verkligt klar, Status, Status2
Options Rubrik = Förfrågan - Mottagning, Förfrågan - Bearbetning, Förfrågan - Anbud, Genomförande - Beställning, Genomförande - Uppdragsplanering, Genomförande - Projektering/Konstruktion, Genomförande - Tillverkning/Utförande, Genomförande - Överlämning till kund, Genomförande - Avslut av uppdrag, Annat
Type Beräknad klar = date
Type Verkligt klar = date
Subst Beräknad klar = $Date
Subst Verkligt klar = $Date
Options Status = Ny, 0%, 25%, 50%, 75%, 100%
Options Status2 = Pågående, Avklarad
Preset Status = Ny
Preset Status2 = Pågående
Cell Style Status 25% = background-color:yellow
Cell Style Status 50% = background-color:orange
Cell Style Status 75% = background-color:33CCFF
Cell Style Status 100% = background-color:green
List Menu Commands = New, Find, Select, Logout, Config, Last day, Help          
Menu commands = List, New, Edit, Delete, Find, Help
List Display = Datum, Namn, Avdelning, Beräknad klar, Verkligt klar, Ansvarig, Status, Status2, Rubrik
Guest menu commands = List, Find, Login, Help
Guest List Menu commands = List, Find, Login, Help
Guest list Display = Datum, Namn, Avdelning, Beräknad klar, Verkligt klar, Ansvarig, Status, Status2, Rubrik
Allow Config = sssuxo
Page Title = Improvements Uppdragsprocessen QPP - $Subject
Suppress default = 3
Reverse sort = 1
Quick filter = Date, Ansvarig, Status, Status2

Regards
/UlfO