| ID |
Date |
Icon |
Author |
Author Email |
Category |
OS |
ELOG Version |
Subject |
|
1393
|
Sun Aug 7 17:16:42 2005 |
 | cunnilinux | cunnilinux@bigmir.net | Info | Linux | 2.5.7 | charset specified in elog.conf has no effect [updated] | well, here's the problem that i had: my charset (koi8-u) was specified in elog.conf for every logbook, but this had no effect, and all elog pages continued tu appeared as iso-8859-1 (which is the default)
when i specified charset in the global section, the problem's gone away.
2do: i think it's worth testing how does it work whet charset specified for a separate logbook overrides globally specidied charset
elog version that is in use: 2.5.7 from debian sarge 3.1 r0a powerpc |
|
1405
|
Mon Sep 5 20:16:50 2005 |
 | Stefan Ritt | stefan.ritt@psi.ch | Info | Linux | 2.5.7 | Re: charset specified in elog.conf has no effect [updated] |
| cunnilinux wrote: | well, here's the problem that i had: my charset (koi8-u) was specified in elog.conf for every logbook, but this had no effect, and all elog pages continued tu appeared as iso-8859-1 (which is the default) when i specified charset in the global section, the problem's gone away.
2do: i think it's worth testing how does it work whet charset specified for a separate logbook overrides globally specidied charset
elog version that is in use: 2.5.7 from debian sarge 3.1 r0a powerpc
|
The documentation clearly states that the "charset" option is under the [global] section. I put it there since it does not make much sense to have separate charsets for separate logbooks. Or do you have one Russian, one Japanese and one Swedish logbook on the same server? Maybe for an international language school 
I can easily put it into the individual logbook's config, but only if more than one person requests this. |
|
1423
|
Tue Oct 4 19:40:27 2005 |
 | David Spindler | dsspindler@earthlink.net | Question | Windows | 2.5.7 | Re: Can't use the command-line client | I have a similar problem. I am using Windows version, and whenever I use the elog client to send entry, it will not take with MOptions set. I usually have 2 attributes required (both MOptions), and I get the message that it is missing a required attribute. When I use ROptions, or Options, it works fine. Is there a problem with MOptions, or am I perhaps using a badly formatted commandline?
Commandline as follows: C:\elog>elog -h IP_ADR -p 80 -l gbld -u username password -a Type=Other -a Operator=SCADA -a Category=Controls -a Subject=Alarm "Please ignore."
Type and Category are required and MOptions.
Below is the pertinent part of the config file:
;***** Attribute Section
Attributes = Log Date, Operator, Type, Category, Engine, Work Order #, EPN, Fuel Tank 1 (A&B), Fuel Tank 2 (C&D), Engine Hours Stop, Engine Hours Start, Email To, Subject
Comment EPN = (Equipment Piece Number)
Comment Fuel Tank 1 (A&B) = (West)
Comment Fuel Tank 2 (C&D) = (East)
MOptions Type = Alarm, Trouble, ESP, Haz. Wx.,Problem, PM, Routine, Load Test, Other
MOptions Category = Engine, Generator, Controls, Fuel, Oil, HV Switchgear, MLG&W, Other
Options Engine = All, 1A, 2A, 3A, 4A, 5A, 1B, 2B, 3B, 4B, 5B, 1C, 2C, 3C, 4C, 5C, 1D, 2D, 3D, 4D, 5D, A Bus, B Bus, C Bus, D Bus, A&B Busses, C&D Busses, West Gen (001), East Gen (002)
Required Attributes = Type, Category, Subject
If time permits, I would appreciate any help possible.
BTW, I like the additional elcode. |
|
1424
|
Tue Oct 4 20:24:26 2005 |
| David Spindler | dsspindler@earthlink.net | Question | Windows | 2.5.7 | Re: Can't use the command-line client | | I just noticed in the changelog that my apparent problem with MOptions may have been fixed. I will try a newer version and see if it works. |
|
1425
|
Tue Oct 4 20:33:05 2005 |
| David Spindler | dsspindler@earthlink.net | Question | Windows | 2.5.7 | Re: Can't use the command-line client |
| David Spindler wrote: | | I just noticed in the changelog that my apparent problem with MOptions may have been fixed. I will try a newer version and see if it works. |
It did.
Keep up the good work. |
|
1810
|
Sat Apr 15 00:37:48 2006 |
 | Marco Calf | marco@kelf.nl.eu.org | Comment | Linux | 2.5.7 | User review..use case: implementing GTD | Playing with elog for a day made me very happy. I was looking for a webbased thingy to support list building for 'Getting Things Done' by David Allen ( David Allen's Getting Things Done ).
Elog is simple, intuitative and very powerfull!
Less informative is the fact that i found no bugs till now 
On usablitity..maybe some more control over the dialog..eg the 'in between' screens (eg after a move...the 'to which log i would like to resume' question)...or have an option to be in select mode by default.
Tnx |
|
915
|
Tue Feb 8 10:38:39 2005 |
 | Rob de Bruin | rdbruin@zernike.nl | | Linux | 2.5.6.1 | Page not found after login or create useraccount | best all,
I'm having trouble with redirecting after creating an account or login.
For example when i create an account with an Admin user when i click on
Save i recieve the following error:
Error finding page!
And this is what de browser address tels me.
http://192.168.71.26/ZC004/?
cmd=Save&new_user_name=zcpvenema&new_full_name=Peter+Venema&new_user_email=p
venema@zernike.nl&email_notify=all&newpwd=123456&newpwd2=123456
But when i remove the line frome the ? and than press enter then i'll while
be able to just elog again.
here is my Global cfg file setting.
What did i do wrong??
########################################
Port = 80
Grp = elog
Usr = elog
Password file = /usr/local/elog/elog-2.5.6/passwd
User login = /usr/local/elog/elog-2.5.6/passwd
Admin user = rdbruin
Resource dir = /usr/local/elog/elog-2.5.6/
Logbook dir = /usr/local/bin/logbooks/
time format = %d %B %Y %H:%M
SMTP host = smtp.xs4all.nl
Main tab = Startpagina
Page Title = Logboeken Zernike College
IOptions Icon = icon1.gif, icon3.gif, icon4.gif, icon5.gif, icon6.gif,
icon7.gif, icon8.gif, icon12.gif, icon13.gif, icon14.gif
Submit page = /usr/local/elog/elog-2.5.6/bericht
Attributes = Author, Type, Category, Subject, Owner, Email
Group Zernike college = Desktops, Servers, Printers, Ribox, Switches,
Routers, Algemeen, Documentatie, XafaX
Options OS = Windows XP, Novell, Windows 2003, Windows 2000, Windows 98
Options Type = Software, Hardware, Besturingssysteem, Monitor
Group Desktops = Harmjan, Helperbrink, Julianalaan, Rummerinkhof,
Westersedrift
Group Helperbrink = ZC004, ZC006, ZC026, ZC155, ZC209, ZC241, ZC246, ZC247,
ZC248, ZC267, ZC288, ZC307, ZC308, ZC446, ZC475, ZC600, ZC601, ZC602,
ZC603, ZC604, ZC605, ZC606, ZC607, ZC608, ZC609, ZC610, ZC611, ZC612,
ZC613, ZC614, ZC615, ZC616, ZC617, ZC618, ZC619, ZC620, ZC621, ZC622,
ZC623, ZC624, ZC625, ZC626, ZC627, ZC628, ZC629, ZC630, ZC631, ZC632,
ZC633, ZC634, ZC635, ZC636, ZC637, ZC638, ZC639, ZC640, ZC641, ZC642,
ZC643, ZC644, ZC645, ZC646, ZC647, ZC648, ZC649, ZC650, ZC651, ZC652,
ZC653, ZC654, ZC655, ZC656, ZC657, ZC658, ZC659, ZC660, ZC662, ZC708,
ZC712, ZC707, ZC711, ZC900, ZC901, ZC902, ZC903, ZC904, ZC905, ZC906,
ZC907, ZC908, ZC909, ZC910, ZC911, ZC912, ZC913, ZC914, ZC915, ZC916,
ZC917, ZC918, ZC919, ZC920, ZC921, ZC922, ZC923
Group Servers = HJZ1, HPB2, HRN1, HRN2, RHF1, ZDL1, ZC-ROOT1, ZC-ROOT2
Group Ribox = HPB, HJZ, HRN, WD, ZDL
Group Printers = HP, Canon
Group HP = 4L, 6L, 2100, 4000, 4050, 4550 kleur, 8000
Group Documentatie = Administratief, Educatief, Systeembeheer, Software,
Hardware
Group Xafax = Pasjes, Chipnet, Smartprinter, Docs
################################################### |
|
916
|
Tue Feb 8 11:04:18 2005 |
| Rob de Bruin | rdbruin@zernike.nl | | Linux | 2.5.6.1 | Re: Page not found after login or create useraccount | As you can see the password is also visable in the addressbar??
> best all,
>
> I'm having trouble with redirecting after creating an account or login.
> For example when i create an account with an Admin user when i click on
> Save i recieve the following error:
> Error finding page!
> And this is what de browser address tels me.
>
> http://192.168.71.26/ZC004/?
> cmd=Save&new_user_name=zcpvenema&new_full_name=Peter+Venema&new_user_email=p
> venema@zernike.nl&email_notify=all&newpwd=123456&newpwd2=123456
>
> But when i remove the line frome the ? and than press enter then i'll while
> be able to just elog again.
>
> here is my Global cfg file setting.
>
> What did i do wrong??
>
> ########################################
>
> Port = 80
> Grp = elog
> Usr = elog
> Password file = /usr/local/elog/elog-2.5.6/passwd
> User login = /usr/local/elog/elog-2.5.6/passwd
> Admin user = rdbruin
> Resource dir = /usr/local/elog/elog-2.5.6/
> Logbook dir = /usr/local/bin/logbooks/
> time format = %d %B %Y %H:%M
> SMTP host = smtp.xs4all.nl
> Main tab = Startpagina
> Page Title = Logboeken Zernike College
> IOptions Icon = icon1.gif, icon3.gif, icon4.gif, icon5.gif, icon6.gif,
> icon7.gif, icon8.gif, icon12.gif, icon13.gif, icon14.gif
> Submit page = /usr/local/elog/elog-2.5.6/bericht
> Attributes = Author, Type, Category, Subject, Owner, Email
> Group Zernike college = Desktops, Servers, Printers, Ribox, Switches,
> Routers, Algemeen, Documentatie, XafaX
> Options OS = Windows XP, Novell, Windows 2003, Windows 2000, Windows 98
> Options Type = Software, Hardware, Besturingssysteem, Monitor
> Group Desktops = Harmjan, Helperbrink, Julianalaan, Rummerinkhof,
> Westersedrift
> Group Helperbrink = ZC004, ZC006, ZC026, ZC155, ZC209, ZC241, ZC246, ZC247,
> ZC248, ZC267, ZC288, ZC307, ZC308, ZC446, ZC475, ZC600, ZC601, ZC602,
> ZC603, ZC604, ZC605, ZC606, ZC607, ZC608, ZC609, ZC610, ZC611, ZC612,
> ZC613, ZC614, ZC615, ZC616, ZC617, ZC618, ZC619, ZC620, ZC621, ZC622,
> ZC623, ZC624, ZC625, ZC626, ZC627, ZC628, ZC629, ZC630, ZC631, ZC632,
> ZC633, ZC634, ZC635, ZC636, ZC637, ZC638, ZC639, ZC640, ZC641, ZC642,
> ZC643, ZC644, ZC645, ZC646, ZC647, ZC648, ZC649, ZC650, ZC651, ZC652,
> ZC653, ZC654, ZC655, ZC656, ZC657, ZC658, ZC659, ZC660, ZC662, ZC708,
> ZC712, ZC707, ZC711, ZC900, ZC901, ZC902, ZC903, ZC904, ZC905, ZC906,
> ZC907, ZC908, ZC909, ZC910, ZC911, ZC912, ZC913, ZC914, ZC915, ZC916,
> ZC917, ZC918, ZC919, ZC920, ZC921, ZC922, ZC923
> Group Servers = HJZ1, HPB2, HRN1, HRN2, RHF1, ZDL1, ZC-ROOT1, ZC-ROOT2
> Group Ribox = HPB, HJZ, HRN, WD, ZDL
> Group Printers = HP, Canon
> Group HP = 4L, 6L, 2100, 4000, 4050, 4550 kleur, 8000
> Group Documentatie = Administratief, Educatief, Systeembeheer, Software,
> Hardware
> Group Xafax = Pasjes, Chipnet, Smartprinter, Docs
>
> ################################################### |
|