Demo Discussion
Forum Config Examples Contributions Vulnerabilities
  Discussion forum about ELOG, Page 648 of 808  Not logged in ELOG logo
 Find |  Login |  Help 
 Full | Summary | Threaded | Show attachments  Show only new entries    6457 Entries 
Goto page Previous  1, 2, 3 ... 647, 648, 649 ... 806, 807, 808   Next  
ID Date Icon Author Author Email Category OS ELOG Version Subjectdown
  67719   Sat Nov 22 14:50:35 2014 Reply harish aminharish.amin@holiday.co.omInfoWindows2.8Re: 5.5.4 cannot decode AUTH parameter

harish amin wrote:

Stefan Ritt wrote:

harish amin wrote:

 Dear Team,

I am having a log book and would like to activate the email notification. I have made the changes as per the guidelines but I am getting the error message while submitting the entry - Error sending Email via "smtp.omantel.net.om": 5.5.4 cannot decode AUTH parameter

The details are as below : (Please note I have replaced the password with the * marks)

21-Nov-2014 16:58:28 [harish@127.0.0.1] {SCREENING VISIT} NEW entry #0

21-Nov-2014 16:58:28 [harish@127.0.0.1] {SCREENING VISIT} Email from <harish.amin@holiday.co.om> to harish.amin@holiday.co.om, SMTP host smtp.omantel.net.om

21-Nov-2014 16:58:28 [harish@127.0.0.1] {SCREENING VISIT} 220 fmgw1.omantel.net.om ESMTP Smtpd; Fri, 21 Nov 2014 15:32:52 +0400

21-Nov-2014 16:58:28 [harish@127.0.0.1] {SCREENING VISIT} 

21-Nov-2014 16:58:28 [harish@127.0.0.1] {SCREENING VISIT} EHLO localhost

21-Nov-2014 16:58:29 [harish@127.0.0.1] {SCREENING VISIT} 250-fmgw1.omantel.net.om Hello [188.66.222.72], pleased to meet you

21-Nov-2014 16:58:29 [harish@127.0.0.1] {SCREENING VISIT} 250-ENHANCEDSTATUSCODES

21-Nov-2014 16:58:29 [harish@127.0.0.1] {SCREENING VISIT} 250-PIPELINING

21-Nov-2014 16:58:29 [harish@127.0.0.1] {SCREENING VISIT} 250-8BITMIME

21-Nov-2014 16:58:29 [harish@127.0.0.1] {SCREENING VISIT} 250-SIZE 32235520

21-Nov-2014 16:58:29 [harish@127.0.0.1] {SCREENING VISIT} 250-DSN

21-Nov-2014 16:58:29 [harish@127.0.0.1] {SCREENING VISIT} 250-AUTH LOGIN PLAIN

21-Nov-2014 16:58:29 [harish@127.0.0.1] {SCREENING VISIT} 250-STARTTLS

21-Nov-2014 16:58:29 [harish@127.0.0.1] {SCREENING VISIT} 250-DELIVERBY

21-Nov-2014 16:58:29 [harish@127.0.0.1] {SCREENING VISIT} 250 HELP

21-Nov-2014 16:58:29 [harish@127.0.0.1] {SCREENING VISIT} AUTH LOGIN

21-Nov-2014 16:58:29 [harish@127.0.0.1] {SCREENING VISIT} Username

21-Nov-2014 16:58:29 [harish@127.0.0.1] {SCREENING VISIT} harish.amin@holiday.co.om

21-Nov-2014 16:58:29 [harish@127.0.0.1] {SCREENING VISIT} Password

21-Nov-2014 16:58:29 [harish@127.0.0.1] {SCREENING VISIT} ******

21-Nov-2014 16:58:30 [harish@127.0.0.1] {SCREENING VISIT} 501 5.5.4 cannot decode AUTH parameter ******

Please help me to resolve this issue.

Thank you

Harish Amin

 For the login to your email sever, the password is encoded in base64 form (actually not really secure). Somehow your server does not support this. Unfortunately I cannot test this without access to your server. But you can try yourself by doing a telnet to your mail server like:

$ telnet <server.domanin> 25

...

$ AUTH PLAIN

With the "plain" method, you should be able to enter your password in plain text (not base64 encoded), and see if that works. If you are successful, I can add this option to elog.

Best,

Stefan

 Dear Stefan

Thank you for your reply. Please check is my entry correct?

port = 8080

Admin user = harish

url = http://localhost:8080

;Find Menu commands = Logout, New, Find, Select, Config, Last day, Last 10, Help

;Guest Menu commands = Login, Back, Find, Last day, Last 10, Help, Logout

;Guest Find Menu commands = Login, Back, Find, Last day, Last 10, Help

SMTP host = smtp.omantel.net.om

SMTP port = 25

$telnet smtp.omantel.net.om 25

$AUTH PLAIN

SMTP username = harish.amin@holiday.co.om

SMTP Password = ********

Subst Email = $user_email

Logfile = errorh.log

Email Encoding = 4

Entries per page = 50

;Logfile = harish.log

;Logging level = 2

 Dear Stefen,

Please help me & reply on my request. Is my global config correct?

  67720   Sat Nov 22 16:05:34 2014 Reply Yoshio Imai$user_emailInfoWindows2.8Re: 5.5.4 cannot decode AUTH parameter

harish amin wrote:
Dear Stefen,
Please help me & reply on my request. Is my global config correct?


I am afraid you misunderstood Stefan. The lines he suggested to you are not something to put into your config file, but something you have to type on the command prompt in order to communicate directly with the mail server (i.e. completely independent from elog). You may have to ensure that the necessary communication program is installed on your computer.

Regards

Yoshio
  66655   Sat Dec 12 20:18:46 2009 Reply Stefan Rittstefan.ritt@psi.chQuestionLinux2.7.8Re: 401 Authorization problem

Ian Stokes-Rees wrote:

Grrr.  Forgetting to pick an icon means my message was blasted.

I have installed elog 2.7.8 and it is running.  When I connect to it and get a login window, I am always denied.  If I remove the passwords, then I can login with no password information.  I have tried both command line for setting passwords and directly in the elogd.cfg file.

Suggestions on what I might be doing wrong would be appreciated.

Regards,

Ian

PS - are there RESTful interfaces to automate the generation of log entries via an HTTP POST or HTTP GET?

Which password scheme are you using? Is it Read passoword = ... or Password file = ...? If you use a password file (that's what most people do) you have to create yourself an account just as you did for this forum here. There is no other way to enter the encrypted password into the password file. Just follow "To start a new password file..." in the documentation.

  69647   Tue Feb 7 16:21:37 2023 Reply Stefan RittI chstefan.ritt@psi.chBug reportLinux3.1.5Re: 3.1.5 - Mass edit bug + Wrong version

I checked and found that the bug which removed the main text was there since the beginning, but it's only triggered if you switch elog to French, it doesn't happen in the English version. I changed a bit the text processing so now it should work also in the French version.

I also changed the version number which is shown at the bottom to 3.1.5.

Stefan

  69648   Tue Feb 7 17:31:20 2023 Reply Cryptagecryptage@hotmail.frBug reportLinux3.1.5Re: 3.1.5 - Mass edit bug + Wrong version

Thanks for your prompt help.
It looks good for text but I still have problem with "select" function (even in English).

If I use "select" menu :
- When multiple values are selected it indicates "only user - keep original values - can edit" (freshly created).




- When a single value is selected, it indicates "only user XXX can edit" where XXX is my truncated name (the first 4 letters).



After editing in with admin account the author is now my truncated name :



If I want to edit a single entry (without select menu) it works perfectly.

Thanks.
 

Stefan Ritt wrote:

I checked and found that the bug which removed the main text was there since the beginning, but it's only triggered if you switch elog to French, it doesn't happen in the English version. I changed a bit the text processing so now it should work also in the French version.

I also changed the version number which is shown at the bottom to 3.1.5.

Stefan

 

  69649   Tue Feb 7 20:45:31 2023 Reply Stefan RittIf itstefan.ritt@psi.chBug reportLinux3.1.5Re: 3.1.5 - Mass edit bug + Wrong version

If it works with a simple edit, then why don't you use that one to edit individual values. I checked and version 3.1.4 had already the same problem, so it was not newly introduced. I would have to invest a couple of hours to fix this issue correcly, which I simply don't have right now.

  69650   Wed Feb 8 10:05:03 2023 Reply CryptageThgacryptage@hotmail.frBug reportLinux3.1.5Re: 3.1.5 - Mass edit bug + Wrong version

Thanks !

Sometime I need to edit multiple values to add a new choice.
By exemple, if I add a new column "status" (open, closed...) , it's mandatory to use select menu to add the new value to existent entries.

With a lot of lines it's not possible to edit one by one.

Stefan Ritt wrote:

If it works with a simple edit, then why don't you use that one to edit individual values. I checked and version 3.1.4 had already the same problem, so it was not newly introduced. I would have to invest a couple of hours to fix this issue correcly, which I simply don't have right now.

 

  69885   Sun Jul 20 23:20:02 2025 Warning Harry Martinharrymartin772@gmail.comBug reportLinux3.1.5Re: 3-level conditional not working

Tried a variant, this time for NEW entries (not EDIT), which I meant to do to begin with; sorry if that was confusing. 

[cond_test]
attributes = region, manufacturer, model

options region = american{us}, japanese{jp}, european{eu}
show attributes = region

{us} options manufacturer = ford, chrysler, gm
{jp} options manufacturer = toyota{toy}, nissan{nis}, mitsubishi{mit}
{eu} options manufacturer = audi, mercedes, bmw, volvo, fiat
{us} show attributes = region, manufacturer
{jp} show attributes = region, manufacturer
{eu} show attributes = region, manufacturer

{toy} options model = corolla, prius, miata
{nis} options model = sentra, murano
{mit} options model = starion, outlander, mirage
{toy,nis,mit} show attributes = region, manufacturer, model

 I'm not sure if my multi-character conditional names are allowed or not, but they do seem to work... somewhat.  Note that I even tried a couple different ways of specifying which attributes to show (single versus multiple OR conditionals).  The problem now is that all of the attributes are always shown, seeming to ignore the conditionals entirely.

Harry Martin wrote:

Not sure if this is a bug or not; if it is not, kindly reclassify the category.

Following is a small example of what I will dub a 3-level, conditional logbook:

[cond_test]
attributes = region, manufacturer, model

show attributes edit = region
options region = american{1}, japanese{2}, european{3}

{1} options manufacturer = ford, chrysler, gm
{2} options manufacturer = toyota{4}, nissan{5}, mitsubishi{6}
{3} options manufacturer = audi, mercedes, bmw, volvo, fiat
{1,2,3} show attributes edit = region, manufacturer
{4} options model = corolla, prius, miata
{5} options model = sentra, murano
{6} options model = starion, outlander, mirage
{4,5,6} show attributes edit = region, manufacturer, model

This example is hardly complete, but it is sufficient to demonstrate the issue I am running into.  This works until I select from the 2nd level (manufacturer); it won't display the dropdown for the model (I think my show attribute edit is supposed to display that).  Is there a restriction on how many levels of conditional I can have?  If there is, it would be disappointing because I am trying to do something similar to this example.

I hope there is something very simple I can do to correct this, or perhaps a completely different approach that accomplishes the same thing.  I'd like to stick with the multi-level selection process as I have done here.

I am running elog 3.1.5 on Devuan Chimaera (approx. Debian Bullseye, sans systemd) in a Virtualbox VM.

 

Goto page Previous  1, 2, 3 ... 647, 648, 649 ... 806, 807, 808   Next  
ELOG V3.1.5-3fb85fa6