Thanks for pointing out this bug. I fixed it. New version under CVS.

A deactivate option is not implemented. The only possibility you have is to enter the search string drictly in the url, like

http://<host>/<logbook>/?Category=NT

Thanks for the quick answer!

best regards,

Uwe

> header. I saw that elog:333 reported a similar problem but this was listed
> as fixed.

Yes, this was fixed in revision 1.550 of elogd.c. You apparently have revision 1.54x
which does not yet contain the patch. You need to donwload the newest version from
CVS and compile it by hand (or wait for the next major release).

> the "$message id" will not be replaced by the msg id, the string "$message
> id"  will be dispalyed and used. Other substitutions as $logbook etc. are
> working.
> 
> Is this a bug or did i missunderstood the manual?

Well, the manual does not state that "$message id" should work for "Subst
<attribute>" option (;-)

The reason is that the message ID is available only *after* a new entry has been
written to the database, and the "Subst" command is evaluated *before* an entry
is submitted. "$message id" only works for "Thread display", "RSS Title", "Subst
on reply", "Subst on edit" and "Display". You should use

Display KlientIn/KundIn = $Vorname $Name; P: $Telefon Privat; G: $Telefon
Geschaft; N: $Telefon Mobil; $Landeskennung-$PLZ $Ortschaft [<a
href="http://localhost:8080/$logbook/$message id">$logbook:$message id</a>]

Please note that you wrote "mesage id", correct is however "message id" (two
"s"), so there is also a typo.

> Since Version 2.5.5: If ELOG is running under German, the "Zurück" Bottom is
> named "Back". Any Idee where I can change this back?  ;-)

The link "Back" has been replaced upon request by "List" which is more
appropriate. So if you changed your menu with "Menu commands = ...", please
replace "Back" by "List" there.

1. thats now clear with the £message id and the work-around is ok for my 
needs

2. the "bacl" link is clear and tranlated to "Liste". But I mean the back 
button 
in the entry and the edit mode (see picture)...  ;-)

> > the "$message id" will not be replaced by the msg id, the 
string "$message
> > id"  will be dispalyed and used. Other substitutions as $logbook etc. 
are
> > working.
> > 
> > Is this a bug or did i missunderstood the manual?
> 
> Well, the manual does not state that "$message id" should work for "Subst
> <attribute>" option (;-)
> 
> The reason is that the message ID is available only *after* a new entry 
has been
> written to the database, and the "Subst" command is evaluated *before* 
an entry
> is submitted. "$message id" only works for "Thread display", "RSS 
Title", "Subst
> on reply", "Subst on edit" and "Display". You should use
> 
> Display KlientIn/KundIn = $Vorname $Name; P: $Telefon Privat; G: $Telefon
> Geschaft; N: $Telefon Mobil; $Landeskennung-$PLZ $Ortschaft [<a
> href="http://localhost:8080/$logbook/$message id">$logbook:$message 
id</a>]
> 
> Please note that you wrote "mesage id", correct is however "message id" 
(two
> "s"), so there is also a typo.
> 
> > Since Version 2.5.5: If ELOG is running under German, the "Zurück" 
Bottom is
> > named "Back". Any Idee where I can change this back?  ;-)
> 
> The link "Back" has been replaced upon request by "List" which is more
> appropriate. So if you changed your menu with "Menu commands = ...", 
please
> replace "Back" by "List" there.