Also, strangely, I am able to use the elog forum page https://midas.psi.ch/elogs/Forum while TLS 1.0 is checked.  I notice the version number is 2.9.0-2425, while we are using 2.9.0-2396, so wondering if this is fixed in this newer version.

Hi,

Is it possible to restrict the display of logbook entries to the entries 
created by the currently logged-in user?

I'm thinking of using the ELOG system in a school laboratory environment: 
students must write entries in the logbook about their excersises, but I 
would like that students can not "see" what other students have written. To 
make it even more complicated, I would like that students can see their own 
entries and the teacher entries.....

Is something like this possible?

Thanks in advance
Bartjan Wattel
the Netherlands

An options list that starts with a double-quotes character (") is handled 
incorrectly. 

Try the line: 
Options Student name  = "Doe, John", "Foo, Bar".

The ELOG list will have four entries, namely:
 - Doe
 - John
 - "
 - Foo, Bar

Hi,

I want to create a series of logbooks, say logbook A, and logbooks B up to 
including S. I want the logbooks B,C,D,E,...S to have the same options and 
layout, the only difference is: the name of the logbook, and an options or 
extendable options list. All other settings of logbooks B-S are the same, 
while logbook A is a completely different logbook. 

I know I can simply copy the settings for logbook B and repeat the settings 
for all logbooks C-S. But is there a better way to accomplish this?

Thanks, 
Bartjan Wattel

Hi Stefan.

I have been "playing" around with this great tool and found an interesting "issue" ...

I use multiple logbooks and have both "Protect Selection page = 1" and "Expand Selection Page = 1".

When I open my elog, I get a Standard Login Screen with the Standard Bottom Text "ELOG V2.7.5-2130" which will link to your this website.

When I "Logout" and "Login" again from the Logbook page, I get another Login Screen with my own "Bottom text login" which will link to my own elog page.

How can I apply my own Bottom Text to the Standard Login Screen ?

Thanks & Regards, Barend
 

Stefan,

I have defined the "Bottom Text Login = ..." in each Logbook Configuration section. But when I use this option in the Global Section, ELOG fails to start.

Barend

[global]
port = 8080
Bottom text = Hello
Bottom text login = Login Hello
Password file = passwd

[demo1]
Comment = General linux tips & tricks
Attributes = Author, Type, Category, Subject
Options Type = Routine, Software Installation, Problem Fixed, Configuration, Other
Page Title = ELOG - $subject

[demo2]
Comment = General linux tips & tricks
Attributes = Author, Type, Category, Subject

 Hi Stefan,

Hope you have enjoyed the Christmas week.

Sorry for the delay.... I have tested your configuration and it worked for me as well. 

In order to determine, which of my settings is causing the problem, I had to activate each individual entry "one by one" and check if the error re-occured. I finally identified following entry "Protect Selection page = 1"

The error also occurs if I change your configuration into:

[global]
port = 8080
Bottom text = <center>Hello</center>
Bottom text login = <center>Login Hello</center>
Password file = passwd
Protect Selection page = 1

[demo1]
Comment = General linux tips & tricks
Attributes = Author, Type, Category, Subject
Options Type = Routine, Software Installation, Problem Fixed, Configuration, Other
Page Title = ELOG - $subject

[demo2]
Comment = General linux tips & tricks
Attributes = Author, Type, Category, Subject
 

Can you advise if I'm missing an entry in order for "Protect Selection page = 1" to work?

"Schönen Rutsch ins neue Jahr".

Regards, 

Barend

When installing ELOG 3.1.2 on my Mac Sierra (10.12.2) with the latest XCode 8.2.1, it seemed to install fine but for one warning when building elogd:

cc -O3 -funroll-loops -fomit-frame-pointer -W -Wall -Wno-deprecated-declarations -DHAVE_SSL -I /opt/local/include -o elogd 
src/elogd.c crypt.o auth.o regex.o mxml.o  -lssl
src/elogd.c:13840:13: warning: '__builtin___strlcpy_chk' will always overflow
      destination buffer [-Wbuiltin-memcpy-chk-size]
            strlcpy(user_email, user_list[i], NAME_LENGTH);
            ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
/usr/include/secure/_string.h:105:3: note: expanded from macro 'strlcpy'
  __builtin___strlcpy_chk (dest, src, len, __darwin_obsz (dest))
  ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
1 warning generated.

My installation was done with "sudo make install", as the instructions state.  I have also been using the prescribed "launchctl" approach.

1. Is the above warning something that needs attention/correcting?

2. My elogd crashes now every time that I attempt any kind of "Find" operation.

3. I synchronize my MacOS version of elog with a linux-based version on my university's web server.  I have installed 3.1.2 on the linux server, and it is running there without problems.  When I now try to synchronize my 3.1.2 ELOG on MacOS laptop with the same version on my linux server, it appears to do the first mirroring operation correctly, but elogd crashes when I try a second synchronization at a later time.  (For now, I have "Mirror simulate = 1" to prevent inadvertent damage.)

Can anyone help me with the above points?

Thank you,

Andreas