When installing ELOG 3.1.2 on my Mac Sierra (10.12.2) with the latest XCode 8.2.1, it seemed to install fine but for one warning when building elogd:

cc -O3 -funroll-loops -fomit-frame-pointer -W -Wall -Wno-deprecated-declarations -DHAVE_SSL -I /opt/local/include -o elogd 
src/elogd.c crypt.o auth.o regex.o mxml.o  -lssl
src/elogd.c:13840:13: warning: '__builtin___strlcpy_chk' will always overflow
      destination buffer [-Wbuiltin-memcpy-chk-size]
            strlcpy(user_email, user_list[i], NAME_LENGTH);
            ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
/usr/include/secure/_string.h:105:3: note: expanded from macro 'strlcpy'
  __builtin___strlcpy_chk (dest, src, len, __darwin_obsz (dest))
  ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
1 warning generated.

My installation was done with "sudo make install", as the instructions state.  I have also been using the prescribed "launchctl" approach.

1. Is the above warning something that needs attention/correcting?

2. My elogd crashes now every time that I attempt any kind of "Find" operation.

3. I synchronize my MacOS version of elog with a linux-based version on my university's web server.  I have installed 3.1.2 on the linux server, and it is running there without problems.  When I now try to synchronize my 3.1.2 ELOG on MacOS laptop with the same version on my linux server, it appears to do the first mirroring operation correctly, but elogd crashes when I try a second synchronization at a later time.  (For now, I have "Mirror simulate = 1" to prevent inadvertent damage.)

Can anyone help me with the above points?

Thank you,

Andreas

When installing ELOG 3.1.2 on my Mac Sierra (10.12.2) with the latest XCode 8.2.1, it seemed to install fine but for one warning when building elogd:

cc -O3 -funroll-loops -fomit-frame-pointer -W -Wall -Wno-deprecated-declarations -DHAVE_SSL -I /opt/local/include -o elogd 
src/elogd.c crypt.o auth.o regex.o mxml.o  -lssl
src/elogd.c:13840:13: warning: '__builtin___strlcpy_chk' will always overflow
      destination buffer [-Wbuiltin-memcpy-chk-size]
            strlcpy(user_email, user_list[i], NAME_LENGTH);
            ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
/usr/include/secure/_string.h:105:3: note: expanded from macro 'strlcpy'
  __builtin___strlcpy_chk (dest, src, len, __darwin_obsz (dest))
  ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
1 warning generated.

My installation was done with "sudo make install", as the instructions state.  I have also been using the prescribed "launchctl" approach.

1. Is the above warning something that needs attention/correcting?

2. My elogd crashes now every time that I attempt any kind of "Find" operation.

3. I synchronize my MacOS version of elog with a linux-based version on my university's web server.  I have installed 3.1.2 on the linux server, and it is running there without problems.  When I now try to synchronize my 3.1.2 ELOG on MacOS laptop with the same version on my linux server, it appears to do the first mirroring operation correctly, but elogd crashes when I try a second synchronization at a later time.  (For now, I have "Mirror simulate = 1" to prevent inadvertent damage.)

Can anyone help me with the above points?

Thank you,

Andreas

My MacOS (10.12.2) elogd version V3.1.2 is a recent git commit (edc5e85), due to the fix to my earlier-described issue solved in the thread here: https://midas.psi.ch/elogs/Forum/68519.

I am trying to (re-)set up Mirror functionality with a linux server running the standard public (V3.1.2-bd75964).  I had initially updated the linux server so that it also had the latest git commit (edc5e85), but could then not even add new logbook entries that involved attachments to it.  I therefore rolled the linux server back to the standard public 3.1.2 version.

On the remote Mac, synchronizations usually look like they are going to work fine, with Mirror simulate = 1 switched on.  After I set Mirror simulate = 0, and if the server and remote logbook are already identical, I *occasionally* get the proper "All Entries Identical" synchronization result.  Unfortunately, this is very rare, and usually there is a failure whereby the remote (Mac) logbook decides that a significant fraction of its entries (usually sequential, from some seemingly random entry all the way up to the last entry) are missing on the linux server and need to be submitted back to the server from the remote Mac.

When the local and remote logbooks are not identical, and a record in need of synchronization contains an attachment, there is again destructive behaviour similar to that described above, except that the Mac elogd executable usually crashes.  (As in the case of the already-identical synchronizations described above, I only tested this after observing the correct expected behaviour first with Mirror simulate = 1.)

I'd be grateful for some help/suggestions.  My current testing suggests that my problems are likely not elog-content dependent.  (The logbook now undergoing synching has less than 10 entries in it.)

More generally, the issue of having things behave fine with Mirror simulate = 1, but then experiencing corruption/damage when switching to Mirror simulate = 0 seems serious to me.

Many thanks, Andreas

The attached screenshot shows the behaviour after doing a synchronization (with Mirror simulate = 1) following first having ensured that the local (Mac) and remote (linux) ELOGs initially showed "All entries identical" when doing a simulated synchronization, and then having edited local entries 9707 and 9709 by uploading (different) attachments to them.

The fact that the synchronization is suggesting to renumber two different entry IDs to the same number looks like a bug.

Best regards,

Andreas W.

When I switch from SSL = 1 to SSL = 0 and I use http:// instead of https://, the ability to upload attachments to logbook entries returns.  With both Chrome and Safari browsers, with SSL = 1 the file upload hangs after only a small percentage of the file has been uploaded.  I ran the following openssl diagnostic on my elogd port.  Would anyone have advice on what might be causing such errors?

tapajo [/usr/local/elog/elog-latest] openssl s_client -connect elog.hep.xxx.xx:80xx -state -nbio | grep "^SSL"

SSL_connect:before/connect initialization

SSL_connect:SSLv2/v3 write client hello A

SSL_connect:error in SSLv2/v3 read server hello A

SSL_connect:unknown state

depth=0 C = EU, ST = SomeState, L = SomeCity, O = SomeOranization, OU = SomeOrganizationUnit, CN = localhost

verify error:num=18:self signed certificate

verify return:1

depth=0 C = EU, ST = SomeState, L = SomeCity, O = SomeOranization, OU = SomeOrganizationUnit, CN = localhost

verify return:1

SSL_connect:unknown state

SSL_connect:unknown state

SSL_connect:unknown state

SSL_connect:unknown state

SSL_connect:unknown state

SSL_connect:unknown state

SSL_connect:error in unknown state

SSL_connect:error in unknown state

SSL_connect:unknown state

SSL_connect:unknown state

SSL handshake has read 1733 bytes and written 871 bytes

SSL-Session:

SSL3 alert read:warning:close notify

SSL3 alert write:warning:close notify

Hi,

I am having trouble with uploading large (>0.5MB) files to elog. We click on upload and in a couple of seconds, the webbrowser complains that the server has dropped the connection.

Following the suggestions I found on these forums (https://midas.psi.ch/elogs/Forum/66753), I increased the timeout.tv_sec to 30 in three locations in elogd.c, but this did not help.

The problem is present in my old elog installation (from ~2 years ago), as well as the latest git snapshot from bitbucket that I cloned on June 10, 2017.

PS: Upload seems to work for non-secure configuration. It still takes a while to load, but it completes. However we prefer to use secure connections ( SSL = 1 ).
PS: Using nmap I looked at the latency to the relevant port, it can be as high as 0.5sec, but most often it is shorter.

Cheers,
e.