I installed ELOG on a Linux server (CentOS 5.2) and a WinXP laptop.

- If I set both servers to non-SSL, I can synchronize with no problems.

- If I set both servers to use SSL, synchronization fails with "Error code: ssl_error_rx_record_too_long" 

- If I set one to ssl and the other non-ssl, synchronization fails with "Remote server is not an ELOG server"

Is anyone synchronizing or mirroring two ELOG servers with SSL? When either or both servers are set to use SSL, I can use either site. but I can't synchronize.

Thanks

Hello,

we used Admin and write passwords. Now this is no longer supported in ELOG 2.9.0 and I tried to change to File or Kerberos Autentication. But nothing worked. I tried the following lines in elog.cfg

[Serverlogbuch]
Authentication = File
Password file = C:\Program Files\ELOG\logbooks\Serverlogbuch\pwd.txt
Self Authentication = 1

So the self Autentication site opens and I can put in all informations. But if I click on save he tries to save the information in the password file and after a time he stops and Internet Explorer says that the page cannot be reached.

The file is not saved. If I remove the 3 lines the logbook opens without any problems.

I tried also kerberos but it didn't work. But there I think some entries in the krb5.ini are wrong.

Would you please help solving the File password problem?

Best Regards

Michael

Ive just installed the RPM of Elog 2.3.2 and ive found a bug relating to 
port bindings, basically im running elog bound to port 81 and when i 
install the new RPM it refuses to bind to this port, i tried port 8080 and 
that worked fine

Any ideas ?

Hi,

I'm trying to synchronize an elog in my computer with my personal elog in my institute's server. The two elogd.cfg files are necessarily different since the elog in my institute is for many people's elogs, so I'm not completely sure this is supposed to work.  

I've copied the configuration of my (remote) elog into my local elogd.cfg file, and added in the global section of the local file:

Mirror server = https://www.pp.rhul.ac.uk:8080/

Mirror Config = 1

Mirror cron = 0 7-19 * * 0-5

Mirror user = ricardo

Password file = [my password file]

Then I relaunched my local elogd demon and tried both to synchronize the local elog and to wait for the cron job to do it. When I try to synchronize the "ATLAS Trigger" elog I get in the browser:

"Safari can’t open the page “https://localhost:8080/ATLAS+Trigger/?cmd=Synchronize” because Safari can’t establish a secure connection to the server “localhost”"

(the local elog is in https://localhost:8080/ATLAS+Trigger/)

When I wait for cron to update from the mirror this is what I get in the log:

28-Jul-2009 18:51:09 [] SSLServer listening on port 8080 ...

28-Jul-2009 18:50:00 [] Cron job started

28-Jul-2009 18:50:00 [] {ATLAS Trigger} MIRROR: Remote server is not an ELOG server

Hello,
I would like to notify by email as soon as an entry is created or modified.
I declared my SMTP which uses TLS security.
The following error message appears : Erreur d'envoi de mail via "smtp.xxxx.xxx.xxx.fr": 5.7.0 Must issue a STARTTLS command first

Is there a solution ?

Hello!

First of all, thank you for this great piece of software! For now it seems to perfectly cover our need to log very basic events, there was a setting for everything we wanted to set.

However we have one problem and that is the saving of the letter "č" (Slovenian) into the log files. That is unicode character U+010C and U+010CD https://unicode-table.com/en/010C/. When writing to the log file it is replaced with "Č" and "č". Is there a known fix for this?

Thank you and best regards,

Matej