> I've built the last C version of elog in git, revision 1ebfd06c using mingw-64 ; the resulting binaries work for me on Windows 2019.
> Attached is a zip file with the binaries.
> I was not able to create a new installer, these are just the executables

I tried to just exchange the attached binaries in my installation but this didn't worked.
elogd was not able to start.

Regards,

daniel

> > > I've built the last C version of elog in git, revision 1ebfd06c using mingw-64 ; the resulting binaries work for me on Windows 2019.
> > > Attached is a zip file with the binaries.
> > > I was not able to create a new installer, these are just the executables
> > 
> > I tried to just exchange the attached binaries in my installation but this didn't worked.
> > elogd was not able to start.
> 
> hmmm strange - did you get an error message or did the binary simply not start?  I've only tested this on a single Windows machine....

Error message is:

Error 1053: The service did not respond to the start or control request in a timely fashion.

I have to admit that I'm doing all this on a Server 2012 machine.

Hello,

I'm new to elog software and I could not find a solution to my configuration issue. I would like to setup a configuration file similar to MEG experiment's elog.

https://elog.psi.ch/elogs/meg/

I'm interested in creating similar to the structure: "General", "Collaboratoin", "Sub-groups (with sub-sub groups "Software", "Hardware" etc). I cannot tell if this was created by using Top Group feature.

Can someone explain how this design structure can be achieved?

Thanks,

Daniel

Hi there,

Here's a bit of a special scenario. There's no server-side check the user is logged in upon posting, but it rather seems the server relies on the post data sent from the form.

An example of this can be triggered on a write restricted elog, by hitting on New and logging out in another tab. Then posting, from the first tab, will post as if the user was logged on. Hitting back and posting again also works.

Cheers

 Hi there :)

I'm having a problem with the e-mail notification on my installation of elog. I'm testing the attachment upload with images, and it seems to work seamlessly. However upon posting, the e-mail notification sends a null attachment, instead of the image I would expect.

Is there an error log I can check for this? I started the elog process without the daemon option, but I can't see any error coming up.

Cheers,
 

Hello community,

I have a feature request for the form of the ELOG.

For some users, especially coming from a MAC background, it is very inconvenient to press enter (ie. on the subject field) and post a message (or get prompted to do so). Instead, enter in these fields should work as a tab.

Cheers, keep up the good work,

Daniel