Hello,

Tried to use the copy to version, just to create a new copy of a old case in
the same logbook
(e.g, support logbook, user with an old problem, to copy it to a new entry)

What I want is to have the Entry time to be updated to the time it was
copyed, not the original entry time. Moved To should perhaps retain its
original time?

Somethings that is possible or a new feature that has to be implemented?


Thanks for this great software Stefan!

Best regards
Michael Husbyn

> > Yes I have upgraded Elog to 2.5.8-2.
> > I submit my new elogd.cfg file maybe it will help you.
> > I have try the preset text under Firefox (the last), avant browser 10.0 
> > (build 165) and IE 6 SP1.
> 
> I tested your config file under Firefox (the last) and it worked fine. On the
> "Liste Routeurs & Firewall", I click "New", then select FWL1, then see the text
> "FLW1.txt" in the main body. I don't have that file, so elog by default just
> shows the file name.
> 
> I also realized that you have double entries in your config file (like two
> "Attributes = " and "Options Type = " lines. However this should not be a
> problem, elog just chooses the first one.
> 
> If your preset text does not work, it could be that you have switched off
> JavaScript. In Firefow, you can open the JavaScript console (Tools/JavaScript
> console). Maybe you see any error there.
> 
> - Stefan

Ok I have fix the problem :)
Options Type = FWL1{1}, FWL2{2}, FWL4{3}, VPN1{4},VPN2{5}
{1} Preset text = FWL1.txt
{2} Preset text = FWL2.txt
{3} Preset text = FWL4.txt
{4} Preset text = VPN1.txt
{5} Preset text = VPN2.txt
I have delete the "" for example FWL1.txt instead of "FWL1.txt" and I've delete 
the double entries too. In fact I don't know why, ELOG has take the second Options 
Type instead of the one :)! Now It work fine :)

Thanks a lot Stefan ;)

> Yes I have upgraded Elog to 2.5.8-2.
> I submit my new elogd.cfg file maybe it will help you.
> I have try the preset text under Firefox (the last), avant browser 10.0 
> (build 165) and IE 6 SP1.

I tested your config file under Firefox (the last) and it worked fine. On the
"Liste Routeurs & Firewall", I click "New", then select FWL1, then see the text
"FLW1.txt" in the main body. I don't have that file, so elog by default just
shows the file name.

I also realized that you have double entries in your config file (like two
"Attributes = " and "Options Type = " lines. However this should not be a
problem, elog just chooses the first one.

If your preset text does not work, it could be that you have switched off
JavaScript. In Firefow, you can open the JavaScript console (Tools/JavaScript
console). Maybe you see any error there.

- Stefan

> > I've change my Attribute "Maint." to "Maint" in my elogd.cfg and in my 
Logbook too 
> > but the problem is the same, I have restarted the service but the 
problem is still 
> > here. Any idea? o_O
> 
> Have you upgraded to 2.5.8-2 ? After the upgrade, "Maint." (with the dot) 
should also work.

Yes I have upgraded Elog to 2.5.8-2.
I submit my new elogd.cfg file maybe it will help you.
I have try the preset text under Firefox (the last), avant browser 10.0 
(build 165) and IE 6 SP1.

Thanks for help :o)

> I've change my Attribute "Maint." to "Maint" in my elogd.cfg and in my Logbook too 
> but the problem is the same, I have restarted the service but the problem is still 
> here. Any idea? o_O

Have you upgraded to 2.5.8-2 ? After the upgrade, "Maint." (with the dot) should also work.

> > Here is my elogd.cfg.
> > I hope this will help you :)
> 
> Yes it did. You were the first one using an attribute containing a dot inside a
> required attribute ("Maint."). This crashed JavaScript. I found a workaround and
> implemented it.
> 
> > when we be released the next elog version who correct the crash of Protect 
> > Selection page = 1 ?
> 
> I just release 2.5.8-2 which contains both fixes.

Hi,
I've change my Attribute "Maint." to "Maint" in my elogd.cfg and in my Logbook too 
but the problem is the same, I have restarted the service but the problem is still 
here. Any idea? o_O

> I want exchange the logs as files and not with the mirroring function. My 
> collegue and me are already exchanging all our project files, so the logs from 
> ELOG could be included in this exchange.

If you do not want to use the mirroring, then you can extract a single entry with
the "hidden" download command. Like for this entry:

http://midas.psi.ch/elogs/Forum/1039?cmd=Download

Tell your browser to save the result locally and you have a file with just this
message. Note however that if you ship these files around, and combine them with an
existing logbook by copying them to the logbook directory, you could have two
entries with the same ID, in which case elogd would produce unpredictable results.

I want exchange the logs as files and not with the mirroring function. My 
collegue and me are already exchanging all our project files, so the logs from 
ELOG could be included in this exchange.