Sharing logbooks among "Top Groups", posted by Satyajit Jena on Sun Aug 20 10:07:57 2017
|
Hi,
I am currently trying to configuring elog top groups, which are supposed to separate from each other. However, I would like to have a common
logbook that should be visible in each group. Is there a way to share logbooks among Top Groups for example |
Re: Sharing logbooks among "Top Groups", posted by Andreas Luedeke on Sun Aug 20 14:55:18 2017
|
I don't know if that works. Why don't you just try?
Satyajit
Jena wrote:
Hi, |
|
Re: Sharing logbooks among "Top Groups", posted by Satyajit Jena on Sun Aug 20 16:21:59 2017
|
Hi,
I tried without success. Logbook is not sharing, it is displaying only under one "Top Group" whereever it appears first.
With regards, |
|
Re: Sharing logbooks among "Top Groups", posted by Andreas Luedeke on Mon Aug 21 08:51:09 2017
|
Hi Satyajit,
I think you've just answered your own question. There is no magic switch - as far as I know - that would change that
behaviour.
Probably there are ways to achieve your desired behaviour (using mirror servers and synchronising the logbooks) but that would require
a large effort and would make your installation a lot more complicated. |
|
CSS reference in Email for private logbooks, posted by Andreas Luedeke on Mon Aug 21 14:27:50 2017
|
We operate ELOG in an intranet. Many logbooks do send out emails; several use HTML content formatting.
If I watch HTML formatted emails
from the intranet, then everything is fine.
If I try to read them from home, my email client hangs when it tries to read the CSS file from
out intranet (URL: https://elog-gfa.psi.ch/SLS/elog.css).
Is there a way to set a URL for the email CSS?
Then I could simply |
|
edit elog config via elog web interface, posted by Tim Schelfhout on Mon Sep 4 11:22:05 2017
|
Hello,
Is it possible to edit the entire elog config file via the elog frontend? I see the config button
on some screens but it only allows me to change user and password?? |
Re: edit elog config via elog web interface, posted by Andreas Luedeke on Mon Sep 4 13:08:35 2017 
|
On the right side of "Change password" you should find "Change config file".
But you'll only see this, if the user has admin priviledges defined in the config file: "Admin user = <user>"
|
|
Email fields - accept semicolons too, posted by Ben Shepherd on Wed Sep 20 16:34:18 2017
|
My elog has a field for entering a list of email addresses, which goes into the "Email All" attribute. They need to be comma-separated, and
an error is thrown if semicolons are used instead. Would it be possible to automatically change semicolons into commas before attempting to send the mail
via SMTP? Neither character is allowed in email addresses so it shouldn't break anything to just do that silently. Thanks! |