Drop down order, posted by Alan Grant on Mon Jan 15 16:46:58 2018
|
Can you please make a change to have the Quick Filter ComboBox controls reference the field type for ordering purposes?
For example, if attribute Lot Number is Type Numeric then the ComboBox should be listed in numerical order instead of alphanumeric (eg: 1,2,3,11,21
vs 1,11,2,21,3). |
|
number of entries in Login user list, posted by Janusz Szuba on Wed Jun 13 18:08:06 2018
|
Hi,
could it be possible to increase the limit of entries in Login user list from 100 to somewhat reasonably higher? Like twice or 3 times as
much. Similar limit exist also on Admin user list, which is afair 10, could this also be increased? |
Re: number of entries in Login user list, posted by Andreas Luedeke on Thu Jun 14 12:37:22 2018
|
Hi Janusz,
You can change the following line in elogd.h and recompile:
#define MAX_N_LIST 100 |
|
Re: number of entries in Login user list, posted by Janusz Szuba on Thu Jun 14 13:07:32 2018
|
Thanks, good point, I was not sure that in case of other lists which will be changed as well, there will not be any problems, like overflow, etc.
Regarding admin list, now I remember, that was the limit to send email notification in case of registration requests. But actually it is not
important right now. |
|
Re: number of entries in Login user list, posted by Stefan Ritt on Thu Jun 14 13:17:33 2018
|
Well, many arrays based on MAX_N_LIST are created on the heap memory, and if you exceed that, elogd simply crashes. There are compile options to increase
the stack and heap size, but that depends on the operating system and the compiler. The value of 100 has been proven to work everywhere. If you increase
it, you're on your own. |
Need to change port 25, posted by Yanick Vachon on Mon Nov 26 17:32:31 2018
|
Hi,
We've made changes in our network and now we have to use port 587 instead of port 25, how can i edit that parameter?
Thanks |
|
Re: Need to change port 25, posted by Andreas Luedeke on Tue Nov 27 08:19:11 2018
|
This is nicely explained in the documentation: https://elog.psi.ch/elog/config.html#global
The following options are specific to the [global]
section:
Port = <port> |
|
Re: Need to change port 25, posted by Stefan Ritt on Tue Nov 27 08:59:45 2018
|
I believe Yanick means the SMTP port, not the port under which elogd is listening. The SMPT port is hard wired to 25, because port 587 was not yet defiend
when I wrote that code. I can make this a variable, but only if it works. So Yanick can you test if port 587 accepts normal SMTP commands? We don't
have such a new server at our lab and I cannot test it. Under Windows you can open a command prompt and telnet to the mail server: |