Re: Configure default time range in 'Find', posted by Stefan Ritt on Thu Jan 22 16:30:07 2015
|
I added a new optoin "Show last default = <days>", where one can pre-set the "Show last" drop-down box. I think this is a good
idea, so now people can configure their elog to a certain default in this parameter. Of course all settings in the Find page are AND'ed together, so
if one restricts the search to tha last week, but then looks for a date more in the past, the result will be zero by definition. The change is in the GIT |
|
Re: Configure default time range in 'Find', posted by Eoin Butler on Thu Jan 22 17:04:03 2015
|
This looks like exactly what I wanted, thanks!
Stefan
Ritt wrote:
I added a new optoin "Show last default = <days>", where |
|
Re: Configure default time range in 'Find', posted by David Pilgram on Thu Jan 22 17:32:16 2015
|
If my coding had been up to it, I would have done this and submitted... thanks Stefan.
Stefan
Ritt wrote:
I added a new optoin "Show last default = <days>", where |
|
Re: Configure default time range in 'Find', posted by David Pilgram on Sun Mar 15 16:41:49 2015
|
Hi Stefan,
There's one pre-set value you forgot to include in this, which is the genuinely required "Show last all time". I archive
many logbooks by years, and so for the year 2005 (say), searching by anything other than all time will always bring up zero results. And it gets |
|
Re: Configure default time range in 'Find', posted by David Pilgram on Sun Mar 15 17:53:44 2015
|
Law of unintended consequences came into play. If you use 0, then on the results page it says "Restricted search to last 0 Days".
So that also needs tweeking, and that's really put my c coding (or lack of it) to the test. But I've changed that phrase to "Unrestricted
search" followed by blank for when the parameter "last" is 0. |
Re: Configure default time range in 'Find', posted by Andreas Luedeke on Mon Mar 16 07:16:56 2015
|
Hi David,
isn't the empty string "" doing already exactly what you want to achieve with "Show last all time"?
It
is at least in my logbook.
Cheers
Andreas
David Pilgram wrote:
Hi Stefan, |
|
Re: Configure default time range in 'Find', posted by David Pilgram on Mon Mar 16 13:51:11 2015
|
Hi Andreas,
Yes, the empty string does exactly that, in the drop down menu, but before my changes, I could not set it to be the default setting in the configuration
file. In an archived logbook, it's perfectly possible for "all time" to be the only sensible value. I tried "Show last default |
|
Re: Configure default time range in 'Find', posted by Andreas Luedeke on Tue Mar 17 07:04:44 2015
|
Hi David,
I was confused because one normally does not need to include a line in the configuration to set a default value. A default
is exactly what you get if you don't specify anything in the configuration
But I think I've figured it out: you were overriding the default in the global section for all logbooks and |