Copy To Function, posted by Mike Bodine on Wed Sep 2 17:06:17 2015
|
Hi,
We've recently implemented the Copy To function and it works as advertised. The issue we're having is the original entry time is also
copied, so if we take an old log and copy it to another log book the entry using reverse sort, preserve = 0 may not display as the newest id. It will receive |
Attachment Uploaded Time is off by one hour, posted by Edmund Hertle on Wed Sep 2 20:23:21 2015 
|
If I upload an attachment the timestamp of the attachment is set to one hour in the future, as demonstrated with this test attachment being one hour
in the future compared to the entry time |
Syntax for conditional list display, posted by Terry L on Tue Sep 15 18:04:35 2015
|
Good Morning,
I would like to limit the ability to edit certain attributes in an ELOG logbook, depending on the user who is logged in. I.e. if "guest"
or a standard "login user" is logged in, I only want to allow the user to edit "attribute1" & "attribute2" of say, 5 |
Re: Syntax for conditional list display, posted by Edmund Hertle on Mon Sep 21 17:08:44 2015
|
Hey Terry,
I don't think this is possible, since in general you cannot define config settings in a way that it would only affect specific users. For
example, you also cannot have different themes for different users (as stated here: https://midas.psi.ch/elogs/Forum/68112 ) |
|
Submit to multiple logbooks simultaniously, posted by Francois Cloutier on Fri Sep 25 19:10:45 2015
|
Good day,
My question is : Is it possible to submit to multiple logbooks simultaniously ?
I have 5 logbooks that could share common attributes, is there a way to acheive that without recreate a new entry in each of them ? |
|
Re: Submit to multiple logbooks simultaniously, posted by Edmund Hertle on Fri Sep 25 22:24:18 2015
|
Hey,
You can use the elog command line tool and submit the same attributes to the 5 different logbooks by iterating over the logbook names executing
something like this: |
|
Re: Syntax for conditional list display, posted by Terry L on Tue Sep 29 17:15:07 2015
|
Hi Eddy,
Thank you for your response. I had a feeling that was the case, but I had high hopes! :) The reason I would like this feature is
because I am trying to use ELOG as a software anomaly tracking log, where any user can create an ELOG and fill out "category", "computer" |
Re: Syntax for conditional list display, posted by Andreas Luedeke on Wed Sep 30 09:28:39 2015
|
Hi Terry,
if you really want to do it, you can find a way to make it work. But it is not straight forward and not what ELOG is made for.
Here some ideas how it could work:
ELOG allows you to have different commands for different users. You could allow "New"
and "Edit" for normal users, but "Reply" only for administrators.
You can use "Subst on reply <attribute> |