> Right. Number of options is limited to 100.
hi, i found the MAX_N_LIST macro and increased it

> > hi
> > the back button/liunk does not work
> > if i click on an entry and then back, it does not work properly, i see the 
> > same entry
> > if i click on the new button or the find button,  and then back, it does 
> > not work properly
> > mfg guenter
> 
> Thanks for reporting that bug, it has been fixed in the curreny CVS version.

thanks

Hi,

I want to write a text like "John:Doe" in ELCODE. However the ":D" is converted to a LOL emoticon. I tried various ways to escape this. One solution I found was entering "John\:Doe". However, the upper-case D is converted to lower-case: the result reads "John:doe".

Thanks for an answer and many thanks for providing ELOG.

Gernot

When entering data for a new log entry some folks always type in an attribute and then the "Enter" key which automatically

submits the entry. Is there a way to prevent this so the only way a new entry is submitted is with the Submit button. Also

is there a way to setup the main text box as a required attribute?

Thanks

Gary

Good day,

I'm new to Elog and I find it really nice and straight foward...

I still have a few questions that I couldn't address reading the manuals.

-I'm creating a logbook with a lot of attributes. I would like to know if there is a way to name (display) my attribute differently then it's original name. That way I could program $attrib1; $attrib2, etc, and map a name to display the column accordingly... Is it something possible ? 

-Is it possible to hide the field "Entry Time" when creating or editing an entry ?

-I saw the Cell Style fonction to set Color (really nice...), My attribute1 is a worker name; Attribute2 is how the work is going on (stop, ready, in process) I would like to hide Atribute2 in list mode but change Attribute1 cell color based on Attribute2 status... is it possible to do so?

-When using "Show Text = 0" (i'm only using attributes), creating a new entry present the menu "Submit", "Save", "Preview" and "Back".... Pressing "Save" leaves the page, shows "OK with a number" and "Preview" is useless. Is it possible to tune what button should be present or not ? I would like to remove Save and Preview....

For the info, my config file

[GCT]
Theme = default
Show Text = 0
Enable attachments = 0
Show attachments = 0
Use lock = 1
Bottom text = 
Comment = Gestion de la charge de travail
omit email to = 1
Suppress Email to users = 1
Suppress default = 2
Suppress Email on edit = 2
Resubmit default = 2
Enable browsing = 0
Back to main = 1
List after submit = 1
'Mode commands = 0
Menu commands = Select, edit, Delete
List menu commands = Select, New, Find
Attributes = #Réception, #Galée, Infographiste, Traitement, Réviseur, Révision, Contrôleur, Contrôle, Correcteur, Correction, Contrôle final
List display = Edit, #Réception, #Galée, Infographiste, Traitement, Réviseur, Révision, Contrôleur, Contrôle, Correcteur, Correction, Contrôle final
Fixed Attributes Edit = #Réception
Preset #Réception = #####

Format #Réception = 0,attribname,attribvalue,5,5
Format #Galée = 0,attribname,attribvalue,10,10
Format Infographiste = 0,attribname,attribvalue,2,2
Format Réviseur = 0,attribname,attribvalue,2,2
Format Contrôleur = 0,attribname,attribvalue,2,2
Format Correcteur = 0,attribname,attribvalue,2,2

Options Infographiste = ??, ML
Options Réviseur = ??
Options Contrôleur = ??
Options Correcteur = ??

Preset Infographiste = ??
Preset Réviseur = ??
Preset Contrôleur = ??
Preset Correcteur = ??

Extendable options = Infographiste, Réviseur, Contrôleur, Correcteur 

ROptions Traitement = ., En cours, Prêt, Vérification
ROptions Révision = ., En cours, Prêt
ROptions Contrôle = ., En cours, Prêt
ROptions Correction = ., En cours, Prêt
ROptions Contrôle final = ., OK

Cell Style Traitement En cours = background-color:#FF0000 
Cell Style Traitement Prêt = background-color:#33FF33
Cell Style Traitement Vérification = background-color:yellow

Cell Style Révision En cours = background-color:#FF0000 
Cell Style Révision Prêt = background-color:#33FF33
Cell Style Révision Vérification = background-color:yellow

Cell Style Contrôle En cours = background-color:#FF0000 
Cell Style Contrôle Prêt = background-color:#33FF33
Cell Style Contrôle Vérification = background-color:yellow

Cell Style Correction En cours = background-color:#FF0000 
Cell Style Correction Prêt = background-color:#33FF33
Cell Style Correction Vérification = background-color:yellow

Cell Style Contrôle final OK = background-color:#33FF33

Cell Style Contrôle final En cours = background-color:#FF0000 
Cell Style Contrôle final Prêt = background-color:#33FF33
Cell Style Contrôle final Vérification = background-color:yellow

Thanks alot for your help :)

Wow !!! Im impressed :):):) I didn't expect such a fast reply !!!

Thanks alot Stefan, I will try it right away !!

Andreas, I really like the idea of hiding attrib 1 and attrib2 and fill attrib3 with a script (I guess using elog.exe command line) ?
I play a little with it and I can modify an attribute with the command line but I cant figure how to set the cell style based on the attrib2 and 
replace attrib3 value with attrib1 value... (basicially I need help !!!) do you think you could help me ?

Hi again,
Hope I'm not draining to much time from you guys !

here is the scenario (fake one just to understand the logic..):
My main logbook as a Option attribute Called "Electrician availables" 
My second logbook is a list of workers and there capacities Moptions : "Electrician", "Plumber", "Genius"

So my question is:

Is it possible to load my main logbook attribute "Electrician availables" Options based on all the "Electrician" found under my second logbook ?

Thanks :)