In der Config-Datei habe ich den Eintrag "language = german" vorgenommen. Was unter Windows funktioniert, verweigert mir Linux: Die Umstellung des Logs auf Deutsch. Wer kann helfen?

Salvatore

Hi Stefan and Andreas,

With the latest incremental version of elog (a738232), I have noticed that when attaching a pdf file, the
.png thumbnail is not generated when the "upload" button is pressed - there is just the usual small line saying
what the latest attachment is.  If this happens, a subsequent attachment will force the generation of the
thumbnail for the *previous* attachment, and again no thumbnail for the latest attachment.

Submitting the comment will also generate the thumbnail.

As of yet, I cannot find any consistent pattern to this.  Also, it's hardly a disaster, but I have been fooled
when attaching a pdf file that subsequently turned out to be damaged and thus unreadable.

How can i configure eLog to be used completely anonymous without the need to log in?

I tried menu and guest menu settings without luck. I do not use password files. With earlier versions this was easy to set up...

Thanks in advance

I'm running  Elog version V3.1.4-ba84827 on Red Hat Linux 7.9. As part of migrating from an older in-house logbook to Elog, I need to upload all the old logbook entries. However, when I attempt to do that with the "elog" command line tool, I'm getting the error "command Submit not  allowed.

I read through a similar report from 2015 (entry #68149), but none of the potential causes seem to be at play here. The logbook is using PAM authentication, and I can log in to the web interface using the same credentials I'm using from the command line. The other case mentioned a dis-allowed encoding format, but my logbook is configured to allow all formats.

This is the command line I'm using:

/usr/local/elog/bin/elog -v -h logbook.aps.anl.gov -p 8081 -l On_Call -x -n 2 -a Date='10/19/2020 01:02' Author="David Wallis" Title='Test Upload' Status='Open' System='On-Call' -u 'wallis' '*****'  "This is a test message"

Hi,

When i set Language = French in global config it works in french until i logout, after i can't login anymore, even if i enter my user and password i always stay at the login window, the only way to login again is to edit the Elogd.cfg file in Elog directory, remove the Language = french and save then i can login in and work normally in english version.

Thanks.

I am getting the following errors when trying to install elog-2.3.9 on
my FreeBSD box. I am running FreeBSD 4.5-RELEASE.

Many thanks!

"Makefile", line 21: Missing dependency operator
"Makefile", line 27: Need an operator
"Makefile", line 29: Missing dependency operator
"Makefile", line 31: Need an operator
make: fatal errors encountered -- cannot continue


You4eea

corrected file is attached