ID |
Date |
Icon |
Author |
Author Email |
Category |
OS |
ELOG Version |
Subject |
65976
|
Mon Sep 15 16:22:39 2008 |
| Wythe IT | carwile@avwtech.com | Bug report | Windows | 2.7.4 | Install on Server 2003: |
I am using Windows Server 2003 R2 Standard Edition. It is up-to-date and a full legal version installed from a geniune MS disk (to put that notion out the way). I host a variety of webpages from this server through IIS6.0.
I am having an issue after installation of the ELOG software. I grabbed the newest version from this website and ran the executable. It installed fine (or appeared to do so).
Upon starting the ELOG server I receive the following error:
elogd.exe - Unable to Locate Component
This application has failed to start because MSVCR71.dll was not found. Re-installing the application may fix this problem.
The file in question is part of an ancient Visual C distributeable. This distributeable for my purposes no longer appears to be available (as I am on .net 3.5). I am unsure of downloading the older runtime libraries from sites that are not microsoft's. I am curious as to how I could go about making elog execute. Any help would be appreciated. Thank you!
|
65978
|
Mon Sep 15 18:49:33 2008 |
| Wythe IT | carwile@avwtech.com | Bug report | Windows | 2.7.4 | Re: Install on Server 2003: |
Stefan Ritt wrote: |
Wythe IT wrote: |
I am using Windows Server 2003 R2 Standard Edition. It is up-to-date and a full legal version installed from a geniune MS disk (to put that notion out the way). I host a variety of webpages from this server through IIS6.0.
I am having an issue after installation of the ELOG software. I grabbed the newest version from this website and ran the executable. It installed fine (or appeared to do so).
Upon starting the ELOG server I receive the following error:
elogd.exe - Unable to Locate Component
This application has failed to start because MSVCR71.dll was not found. Re-installing the application may fix this problem.
The file in question is part of an ancient Visual C distributeable. This distributeable for my purposes no longer appears to be available (as I am on .net 3.5). I am unsure of downloading the older runtime libraries from sites that are not microsoft's. I am curious as to how I could go about making elog execute. Any help would be appreciated. Thank you!
|
I didn't realize that MSCVR71.dll is kind of outphased. I will add it to future distributions. For the moment, you can download it from the elog server directly.
|
Thank ya much. Worked perfectly. For others with this issue, download that linked file to your c:\windows\system32\ folder. |
65985
|
Thu Oct 2 19:00:25 2008 |
| Wythe IT | carwile@avwtech.com | Bug report | Windows | 2.7.4 | Random Crashes |
Running on windows server 2003.
Mysteriously from time to time i find ELOG has crashed and i must restart it.
Event log shows:
This has occurred twice so far in the month or less elog has been running. The platform is stable and i have no other issues or negative events besides incorrect ASP calls here and there. Thanks.
Faulting application elogd.exe, version 0.0.0.0, faulting module elogd.exe, version 0.0.0.0, fault address 0x0004b9c3.
For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp. |
68189
|
Fri Nov 13 11:26:12 2015 |
| Xuan Wu | wux@ihep.ac.cn | Question | Linux | 3.1.1 | email notification authentication failed |
Hi All,
I got into trouble setting up the automated email notification.
elog.cfg:
;Send automatic email notifications
SMTP host = mail.ihep.ac.cn
;SMTP host = 127.0.0.1
;Some SMTP server require username/passowrd authentication
;elogd -t <your password> for creating SMTP password
SMTP username = wux@ihep.ac.cn
SMTP Password = .JYEytMGvsHANeCIfQJXmscIt4NOtzJ8GbAnh3XH280
;SMTP Password = V3gxMzYxODAxMjAxNA==
;No Email notification
Suppress Email to users = 1
elogd -v:
GET /LEBT/?cmd=Forgot&login_name=wux HTTP/1.1
timezone: -28800, offset: 28800
Email from <wux@ihep.ac.cn> to wux@ihep.ac.cn, SMTP host mail.ihep.ac.cn:
220 ihep.ac.cn Anti-spam GT for Coremail System (ihep[20151015])
EHLO 10.1.44.220
250-mail
250-PIPELINING
250-AUTH LOGIN PLAIN
250-AUTH=LOGIN PLAIN
250-coremail 1Uxr2xKj7kG0xkI17xGrUDI0s8FY2U3Uj8Cz28x1UUUUU7Ic2I0Y2Url11UVUCa0xDrUUUUj
250-STARTTLS
250 8BITMIME
AUTH LOGIN
username:
wux@ihep.ac.cnPassword:
.JYEytMGvsHANeCIfQJXmscIt4NOtzJ8GbAnh3XH280
535 Error: authentication failed
test with telnet:
[wux@logbook ~/elog]$ telnet mail.ihep.ac.cn 25
Trying 202.38.128.6...
Connected to mail.ihep.ac.cn.
Escape character is '^]'.
220 ihep.ac.cn Anti-spam GT for Coremail System (ihep[20151015])
EHLO 10.1.44.220
250-mail
250-PIPELINING
250-AUTH LOGIN PLAIN
250-AUTH=LOGIN PLAIN
250-coremail 1Uxr2xKj7kG0xkI17xGrUDI0s8FY2U3Uj8Cz28x1UUUUU7Ic2I0Y2Ur3T0__UCa0xDrUUUUj
250-STARTTLS
250 8BITMIME
AUTH LOGIN
334 dXNlcm5hbWU6
AUTH PLAIN
535 Error: authentication failed
Connection closed by foreign host.
Any advice and suggestions will be appreciate.
|
68452
|
Tue Nov 15 07:29:04 2016 |
| Xuan Wu | wux@ihep.ac.cn | Question | Windows | 3.1.1 | Re: How to configure email? "Error sending Email via <i>"127.0.0.1"</i>" |
I use "SMTP username = <My_email_account>" without "@xxx" for my site. So you can try it like that. HTH
I Gede Made Wira Saputra wrote: |
Hi All,
I have a problem with email configuration with gmail account. I use Elog V3.1.1 and Stuneel V5-32 with Windows 7 Profesional 64-bit
I follow the instruction in elog:68039 This is my configuration elogd.cfg and stunnel.conf
# My elogd.cfg
;Mail server configuration
smtp host = 127.0.0.1
SMTP username = <My_email_account>@gmail.com
SMTP Password = MjhNYXNrb2tpMjI=
Email encoding = 1
Logout to main = 1
# My Stunnel.conf
[gmail-pop3]
client = yes
accept = 127.0.0.1:110
connect = pop.gmail.com:995
verify = 2
CAfile = ca-certs.pem
checkHost = pop.gmail.com
OCSPaia = yes
[gmail-imap]
client = yes
accept = 127.0.0.1:143
connect = imap.gmail.com:993
verify = 2
CAfile = ca-certs.pem
checkHost = imap.gmail.com
OCSPaia = yes
[elogssl]
client = yes
accept = 127.0.0.1:25
connect = smtp.gmail.com:465
verify = 2
CApath = /etc/ssl/certs
[gmail-smtp]
client = yes
accept = 127.0.0.1:25
connect = smtp.gmail.com:465
verify = 2
CAfile = ca-certs.pem
checkHost = smtp.gmail.com
OCSPaia = yes
I got error "Error sending Email via <i>"127.0.0.1"</i>" when I run it.
Could somebody help me?
Thanks,
|
|
68454
|
Tue Nov 15 09:46:25 2016 |
| Xuan Wu | wux@ihep.ac.cn | Question | Windows | 3.1.1 | Re: How to configure email? "Error sending Email via <i>"127.0.0.1"</i>" |
You can use command to test your email service and your username and password.
telnet your.email.host 25
ehlo hostname
auth login
(input your username) note that:the username and password should be generaterd by command perl -MMIME::Base64 -e 'print encode_base64 (“username”)’
(input your password)
Then you can test the server and username and password are right or not.
And you can set "Logging level = 3" elogd -v and see what is going on?
I Gede Made Wira Saputra wrote: |
Hi Xuan Wu,
Nothing happen, I still got an error.
Do you have any more idea?
Xuan Wu wrote: |
I use "SMTP username = <My_email_account>" without "@xxx" for my site. So you can try it like that. HTH
I Gede Made Wira Saputra wrote: |
Hi All,
I have a problem with email configuration with gmail account. I use Elog V3.1.1 and Stuneel V5-32 with Windows 7 Profesional 64-bit
I follow the instruction in elog:68039 This is my configuration elogd.cfg and stunnel.conf
# My elogd.cfg
;Mail server configuration
smtp host = 127.0.0.1
SMTP username = <My_email_account>@gmail.com
SMTP Password = MjhNYXNrb2tpMjI=
Email encoding = 1
Logout to main = 1
# My Stunnel.conf
[gmail-pop3]
client = yes
accept = 127.0.0.1:110
connect = pop.gmail.com:995
verify = 2
CAfile = ca-certs.pem
checkHost = pop.gmail.com
OCSPaia = yes
[gmail-imap]
client = yes
accept = 127.0.0.1:143
connect = imap.gmail.com:993
verify = 2
CAfile = ca-certs.pem
checkHost = imap.gmail.com
OCSPaia = yes
[elogssl]
client = yes
accept = 127.0.0.1:25
connect = smtp.gmail.com:465
verify = 2
CApath = /etc/ssl/certs
[gmail-smtp]
client = yes
accept = 127.0.0.1:25
connect = smtp.gmail.com:465
verify = 2
CAfile = ca-certs.pem
checkHost = smtp.gmail.com
OCSPaia = yes
I got error "Error sending Email via <i>"127.0.0.1"</i>" when I run it.
Could somebody help me?
Thanks,
|
|
|
|
68456
|
Tue Nov 15 11:22:31 2016 |
| Xuan Wu | wux@ihep.ac.cn | Question | Windows | 3.1.1 | Re: How to configure email? "Error sending Email via <i>"127.0.0.1"</i>" |
You can use command to test your email service and your username and password.
telnet your.email.host 25
ehlo hostname
auth login
(input your username) note that:the username and password should be generaterd by command perl -MMIME::Base64 -e 'print encode_base64 (“username”)’
(input your password)
Then you can test the server and username and password are right or not.
And you can set "Logging level = 3" elogd -v and see what is going on?
I Gede Made Wira Saputra wrote: |
Hi Xuan Wu,
Nothing happen, I still got error. Do you have any more idea? I really confuse.
Xuan Wu wrote: |
I use "SMTP username = <My_email_account>" without "@xxx" for my site. So you can try it like that. HTH
I Gede Made Wira Saputra wrote: |
Hi All,
I have a problem with email configuration with gmail account. I use Elog V3.1.1 and Stuneel V5-32 with Windows 7 Profesional 64-bit
I follow the instruction in elog:68039 This is my configuration elogd.cfg and stunnel.conf
# My elogd.cfg
;Mail server configuration
smtp host = 127.0.0.1
SMTP username = <My_email_account>@gmail.com
SMTP Password = MjhNYXNrb2tpMjI=
Email encoding = 1
Logout to main = 1
# My Stunnel.conf
[gmail-pop3]
client = yes
accept = 127.0.0.1:110
connect = pop.gmail.com:995
verify = 2
CAfile = ca-certs.pem
checkHost = pop.gmail.com
OCSPaia = yes
[gmail-imap]
client = yes
accept = 127.0.0.1:143
connect = imap.gmail.com:993
verify = 2
CAfile = ca-certs.pem
checkHost = imap.gmail.com
OCSPaia = yes
[elogssl]
client = yes
accept = 127.0.0.1:25
connect = smtp.gmail.com:465
verify = 2
CApath = /etc/ssl/certs
[gmail-smtp]
client = yes
accept = 127.0.0.1:25
connect = smtp.gmail.com:465
verify = 2
CAfile = ca-certs.pem
checkHost = smtp.gmail.com
OCSPaia = yes
I got error "Error sending Email via <i>"127.0.0.1"</i>" when I run it.
Could somebody help me?
Thanks,
|
|
|
|
68462
|
Thu Nov 17 09:54:03 2016 |
| Xuan Wu | wux@ihep.ac.cn | Question | Windows | 3.1.1 | Re: How to configure email? "Error sending Email via <i>"127.0.0.1"</i>" |
Hi,
I'm sorry that I'm not familiar with the stunel. I came across email sending problem before. I created a email server in my own PC called postfix. Elog can use this email server to send email. Finally, I could use the email server from our institution. Maybe Luedeke or Stefan can help you.
I Gede Made Wira Saputra wrote: |
Hi Xuan Wu,
I got error from stunel as below.
2016.11.17 14:07:01 LOG5[0]: Service [gmail-smtp] accepted connection from 127.0.0.1:52473
2016.11.17 14:07:03 LOG3[0]: s_connect: connect 74.125.130.109:465: Connection refused (WSAECONNREFUSED) (10061)
2016.11.17 14:07:04 LOG3[0]: s_connect: connect 74.125.130.108:465: Connection refused (WSAECONNREFUSED) (10061)
2016.11.17 14:07:04 LOG5[0]: Connection reset: 0 byte(s) sent to SSL, 0 byte(s) sent to socket
2016.11.17 14:09:02 LOG5[1]: Service [gmail-smtp] accepted connection from 127.0.0.1:52510
2016.11.17 14:09:03 LOG3[1]: s_connect: connect 74.125.130.108:465: Connection refused (WSAECONNREFUSED) (10061)
2016.11.17 14:09:04 LOG3[1]: s_connect: connect 74.125.130.109:465: Connection refused (WSAECONNREFUSED) (10061)
2016.11.17 14:09:04 LOG5[1]: Connection reset: 0 byte(s) sent to SSL, 0 byte(s) sent to socket
2016.11.17 14:18:04 LOG5[2]: Service [gmail-smtp] accepted connection from 127.0.0.1:52569
2016.11.17 14:18:05 LOG3[2]: s_connect: connect 74.125.130.109:465: Connection refused (WSAECONNREFUSED) (10061)
2016.11.17 14:18:06 LOG3[2]: s_connect: connect 74.125.130.108:465: Connection refused (WSAECONNREFUSED) (10061)
2016.11.17 14:18:06 LOG5[2]: Connection reset: 0 byte(s) sent to SSL, 0 byte(s) sent to socket
2016.11.17 14:18:25 LOG5[3]: Service [gmail-smtp] accepted connection from 127.0.0.1:52581
2016.11.17 14:18:26 LOG3[3]: s_connect: connect 74.125.130.108:465: Connection refused (WSAECONNREFUSED) (10061)
2016.11.17 14:18:27 LOG3[3]: s_connect: connect 74.125.130.109:465: Connection refused (WSAECONNREFUSED) (10061)
2016.11.17 14:18:27 LOG5[3]: Connection reset: 0 byte(s) sent to SSL, 0 byte(s) sent to socket
Do you know about these?
Xuan Wu wrote: |
You can use command to test your email service and your username and password.
telnet your.email.host 25
ehlo hostname
auth login
(input your username) note that:the username and password should be generaterd by command perl -MMIME::Base64 -e 'print encode_base64 (“username”)’
(input your password)
Then you can test the server and username and password are right or not.
And you can set "Logging level = 3" elogd -v and see what is going on?
I Gede Made Wira Saputra wrote: |
Hi Xuan Wu,
Nothing happen, I still got error. Do you have any more idea? I really confuse.
Xuan Wu wrote: |
I use "SMTP username = <My_email_account>" without "@xxx" for my site. So you can try it like that. HTH
I Gede Made Wira Saputra wrote: |
Hi All,
I have a problem with email configuration with gmail account. I use Elog V3.1.1 and Stuneel V5-32 with Windows 7 Profesional 64-bit
I follow the instruction in elog:68039 This is my configuration elogd.cfg and stunnel.conf
# My elogd.cfg
;Mail server configuration
smtp host = 127.0.0.1
SMTP username = <My_email_account>@gmail.com
SMTP Password = MjhNYXNrb2tpMjI=
Email encoding = 1
Logout to main = 1
# My Stunnel.conf
[gmail-pop3]
client = yes
accept = 127.0.0.1:110
connect = pop.gmail.com:995
verify = 2
CAfile = ca-certs.pem
checkHost = pop.gmail.com
OCSPaia = yes
[gmail-imap]
client = yes
accept = 127.0.0.1:143
connect = imap.gmail.com:993
verify = 2
CAfile = ca-certs.pem
checkHost = imap.gmail.com
OCSPaia = yes
[elogssl]
client = yes
accept = 127.0.0.1:25
connect = smtp.gmail.com:465
verify = 2
CApath = /etc/ssl/certs
[gmail-smtp]
client = yes
accept = 127.0.0.1:25
connect = smtp.gmail.com:465
verify = 2
CAfile = ca-certs.pem
checkHost = smtp.gmail.com
OCSPaia = yes
I got error "Error sending Email via <i>"127.0.0.1"</i>" when I run it.
Could somebody help me?
Thanks,
|
|
|
|
|
|