Hi Erkcan,

I observed similar behaviours when attempting to do SSL uploads and mirroring over a WAN (see some of my recent posts).  Having not received any responses/help, and no time to try debugging the source myself, I've changed the way I use ELOG such that my attachment uploads are always local (on my Mac laptop, where I do most of my ELOGging) and I have switched off the mirroring, choosing instead to do my own rsync backup to a central linux server on which I have running a read-only ELOG executable.  This configuration is both relatively secure and stable, and it matches my use case well.  More generally, however, it is unfortunate that this SSL and mirroring functionality isn't truly there for all users, even though the documentation touts it to be so.

Best regards,

Andreas W.

On a new MacBook Pro (Silicon M3), I installed version 3.1.5 build 23df00d9.  The application appears to work normally, except that, after a short while, the indicated attachment count (paperclips in the attachment column of the Summary view) starts to increment fairly rapidly with each time that I visit the page.  Attachment counts appear even for records that don't have any attachments.  When I access records individually, either those with or without real attachments, everything looks OK.  Any insights as to what might be causing this, and how to correct?

Installation went smoothly using the (now longstanding) MacOS installation instructions, with one small exception: When doing the "sudo launchctl load ..." step, there is occasionally an I/O error of some kind.  (Sorry, I don't have an exact transcript of the error at the moment, but it appears to refer to line 5 of a script.)

Many thanks,

Andreas W.

A quick follow-up concerning the secondary matter I mentioned in my last post, namely the issues I had with the deprecated "sudo launchctl load ..." and "sudo launchctl unload ..." subcommands currently provided in the ELOG installation instructions for MacOS.  I found a solution to this -- will post it in a separate thread.

The strangely auto-incrementing attachment counts in the Summary view are still present, and I'm curious if anyone else has experienced those.  Also, I could not find a way to customize the Summary view such that the final (rightmost) column with the attachment counts can be suppressed.  That would at least put the problem out of sight until a developer can intervene and fix the bug.

The section of the ELOG Administrator's Guide https://elog.psi.ch/elog/adminguide.html describing how to build and install ELOG on a Mac OS X system has worked well for me for several years, even though there have been warnings that the "load" and "unload" subcommands of the "launchctl" command have been deprecated for some time.  After trying my luck again on a new Mac with the latest operating system, I encountered errors of the type "Load failed: 5: Input/output error" when attempting to follow these instructions.

After a bit of searching around, I used information at the page https://www.alansiu.net/2023/11/15/launchctl-new-subcommand-basics-for-macos/ to deploy the more current subcommands as follows:

sudo launchctl enable system/ch.psi.elogd
sudo launchctl bootstrap system /Library/LaunchDaemons/ch.psi.elogd.plist 

sudo launchctl disable system/ch.psi.elogd

Once the above can be verified, perhaps the instructions in the Administrator's Guide can be updated accordingly.

Here's a more complete/correct set of the updated commands:

sudo launchctl enable system/ch.psi.elogd
sudo launchctl bootstrap system /Library/LaunchDaemons/ch.psi.elogd.plist 

sudo launchctl bootout system /Library/LaunchDaemons/ch.psi.elogd.plist
sudo launchctl disable system/ch.psi.elogd

Cheers,
Andreas

Thanks a lot Stefan, for fixing this so quickly! I'm now running 3.1.5 fe60aaf0, with the phantom-attachment-count issue in the Summary view now resolved.  Cheers, Andreas W.

Hi Stefan, Thanks a lot for implementing the updated commands. I noted that there are a few typos that could cause people confusion if not fixed:

In one case, "launchctl" is misspelled.

Confusingly, I think the two lines containing the 'enable' and 'disable' commands use the contiguous text string "system/ch.psi.elogd" (no space), whereas the two lines containing the 'bootstrap' and 'bootout' commands use the phrase "system /Library/LaunchDaemons/ch.psi.elogd.plist" (note space after 'system').

Many thanks, Andreas W.

 There is an firefox addon "It's all text" that allows you to call your own editor for all textarea fields in the browser.

If you then choose "plain" or "ELCode" encoding in ELOG for a new entry or to modifiy an existing entry, you can use your favourite editor to edit the entry by an new "EDIT" button associated with the textarea input field. It works simply by temporary files.

Not really a "drop-in" replacement, but similar.