Re: Show all common attributes, posted by Stefan Ritt on Thu Nov 28 10:01:47 2002
|
> > > In the "find" command, when searching over all logbooks, it
> > > would be nice to see ALL attributes, which are common for all
> > > logbooks (e.g. typically the author name), not just
> > > logbook name, date and text.
> >
> > That depends on how you specify what gets displayed in a search (with
> > the "Display search" option for example). If you try the following link:
> >
> > http://midas.psi.ch/elogdemo/Forum/?mode=summary&all=1
> >
> > you see that all attributes are displayed from the three logbooks in
this
> > installation.
>
> How does the corresponding elogd.cfg entry look like for the
> display search command ? - I can't reproduce this behaviour...
Ok, finally I can confirm the problem. It will be fixed from Version 2.2.4
on. |
two features, posted by tony summerfelt on Fri Nov 29 17:00:36 2002
|
unless i missed these in the docs some place:
1) a threaded display but collapsed threads unstead of all replies showing
2) the subject is the link along with the icon. it would make it a little easier to click on the message if you run your montior on a high resolution... |
New "Quick filter" facility added, posted by Stefan Ritt on Thu Dec 12 14:12:41 2002
|
Starting from version 2.2.4 which has been released today, the
option "quick filter" has been added. A "quick filter" is a drop down box
on the message display page. By selecting a value from the drop down box,
only messages of that type are displayed. See this forum which uses "Quick
filter = Date, Category".
This new option adresses a couple of installations which require a large
number of logbooks. Instead of using many similar logbooks, the old logbook
name can now be defined as an attribute. All messages get now mixed, but by
defining the logbook attribute as a quick filter, one can display the
messages belonging to the individual logbooks separately with a single
click. |
|
Re: two features, posted by Stefan Ritt on Thu Dec 12 14:16:22 2002
|
> unless i missed these in the docs some place:
>
> 1) a threaded display but collapsed threads unstead of all replies showing
This feature has been added in Version 2.2.4 which has been released today.
Use the "collase" button.
> 2) the subject is the link along with the icon. it would make it a little
easier to click on the message if you run your montior on a high resolution...
This feature has been added in Version 2.2.4 as well. Use "line as link = 1"
in elogd.cfg |
|
Re: two features, posted by tony summerfelt on Thu Dec 12 18:10:03 2002
|
> This feature has been added in Version 2.2.4 which has been released today.
> Use the "collase" button.
> This feature has been added in Version 2.2.4 as well. Use "line as link = 1"
> in elogd.cfg
thanks. that was quick :) |
|
expand flag, posted by tony summerfelt on Thu Dec 12 19:02:03 2002
|
i have expand flag set to 0 but it doesn't seem to be working...
i can expand and collapse via the links, or if i make sure the url includes it. |
|
Re: expand flag, posted by Stefan Ritt on Thu Dec 12 20:26:03 2002
|
> i have expand flag set to 0 but it doesn't seem to be working...
It workes here flawlessly. Can you double check the spelling etc. If
everything is ok, can you send me your elogd.cfg for analysis?
- Stefan |
|
Re: expand flag, posted by Stefan Ritt on Thu Dec 19 15:14:34 2002
|
> > i have expand flag set to 0 but it doesn't seem to be working...
>
> It workes here flawlessly. Can you double check the spelling etc. If
> everything is ok, can you send me your elogd.cfg for analysis?
>
> - Stefan
I checked your elogd.cfg: The flag is called "Expand default" not "Expand" as
you had it. With "Expand default = 0" it works fine. Just RTFM...
- Stefan |