Hello there !!

I wonder if it's possible to write an url like this[URL=?CR=CR00000429]CR00000429[/URL] 
in fact it don't work for the moment , because it is redirected tu http:///?CR=CR00000429
is it possible to have url without http://

I have a logbook CR and a type CR and i work now in localhost but i want my elog to be accessible from anywhere.
Im not very clear but I hope you understand.



[TABLE border="1"]
Emplacement|CR|TYPE|Cable trace voix 1|Cable trace voix 2|url|-
MON|CR00002536|Monitoring|x|x|[URL=http://localhost:8080/CR/?CR=CR00002536]CR00002536[/URL]|-
POW1|CR00000429|POWER Ro|x|x|[URL=?CR=CR00000429]CR00000429[/URL]|-
POW2|CR00000430|POWER Ro|x|x|[URL=?CR=CR00000430]CR00000430[/URL]|-

[/TABLE]

Hi

I am having a little problem with e-log that I can easily reproduce.

I have defined a number of constraints on my e-log fields and I am testing what happens when the user does not respect them.

So this only happens when I am not observing the input formats or the mandatory fields.

This is the GDB trace. This is not very verbose, so I must learn to use the other tracers, I guess.

Soren

Dear all, 

I would need your help with an incremental index with date information.

I want to have an incremental number made by the last two digits of the year, the two digits of the month and an incremental four digits number. 

Subst Number = %y%m####

The problem is that I don't want to have the incremental number reset to zero every new month, but rather only once a year. Is it something like this possible? 

Thanks for your help! 

toto

Hi

I'm doing something wrong but can't work out what! 

I've created a new logbook with some date attributes that need to keep in step, e.g. one date ("receipt date") is set to the date the new record is created and another ("response required") to 7 days later.  The logbook doesn't use threaded messages, just a single page for each log entry with Submin/Preview/Back.  The dates are set with:

Preset Receipt Date = $date

Preset Response Required = $shell(gawk 'BEGIN{ print $Receipt Date + 86400 * 7}')

"receipt date" and "response required"  are set correctly when the log is written but if I change "receipt date" then "response required" is not altered - presumably because Preset only works on "New".  Tho I haven't found a way to make this dynamic with Subst.

When the log is updated later a third date may be entered ("proposal submitted") and this should calculate a fourth date ("proposal expires").  Again, I thought I could do this with some sort of "Subst" but can't work out how.  If I use Subst then the value of "proposal expires" isn't changed at all and if I use Subst On Edit then the value isn't changed until I go in to edit the log when the correct "proposal expires" date gets calculated and displayed, e.g.:

Subst On Edit Proposal Expires = $shell(gawk 'BEGIN{ if ($Proposal Sumbitted > 0) {print $Proposal Submitted + 86400 * 30}}')

Am I trying to do the impossible, and is there a document that will help me to understand when different updates (Preset, Subst, Subst On..., Change etc) happen and comparing their use?

A great piece of software - though I sometimes find it hard to get my head round all that it can be bent to do!

regards

Steve

Hi there! 

I have noticed this effect when editing entries with the command line elog.exe.

Let's say I submit a new entry via the command line and I'm also submitting an attachment file. If I check the elog entry via the browser I see my entry there with its attachment as expected. The attachment is also present on the server in the logbook folder with the date and time stamp in front of the original name. 

Now, let's say I would like to edit the same entry via the command line, if I don't pass the attachment, the edited entry won't show any attachment in the browser but on the server there is still the old attachment file available. 

A similar situation is when I edit an entry and I want the edited entry to have the same attachment file of the original one. In that case, the entry on the browser will show the attachment, but on the server I have two copies of the attachment file with the two timestamps (original submission and edited submission). Moreover the first copy is unreachable from any client because not linked to any entry anymore.

In general I would not care much, but I have an application that is regularly updating entries and I will soon have the server hard disk full of useless copies of unlinked attachment. 

I have seen that when deleting an entry, also all its attachments are removed. Would it be possible to have attachments removed when editing an entries? 

Thanks for your help! 

Cheers,

toto

Dear Stefan, 

There is a problem with editing an Elog page in "plain" format with the following "User Agent" :

"Mozilla/5.0 (Macintosh; Intel Mac OS X 10_15_7) AppleWebKit/605.1.15 (KHTML, like Gecko) Version/16.1 Safari/605.1.15"

It duplicates the newline symbols such that "1<CRLF>2" becomes "1<CRLF><CRLF>2". If edited again - "1<CRLF><CRLF><CRLF><CRLF>2".

I blame the new version of the Apple WebKit. 

It works fine with Chrome (user agent: "Mozilla/5.0 (Macintosh; Intel Mac OS X 10_15_7) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/108.0.0.0 Safari/537.36"). But fails with Safari. 
 

Could you please have a look? 

Thank you in advance, 

Andrey Pashnin

AMS collaboration

This is a duplicate, made by mistake.

Could someone point me to the LDAP configuration docs, I searched to no avail.  I'm sure there is some big red ldap config button it, but I just can't find it.